Click on Series name for product info on aimtec.com Series AM6TIW-RZ 6 Watt | DC-DC Converter FEATURES: • • • • • Models Single output Model AM6TIW-2403S-RZ AM6TIW-2405S-RZ AM6TIW-2412S-RZ AM6TIW-2415S-RZ AM6TIW-2424S-RZ AM6TIW-4803S-RZ AM6TIW-4805S-RZ AM6TIW-4812S-RZ AM6TIW-4815S-RZ AM6TIW-4824S-RZ AM6TIW-2403SH30-RZ AM6TIW-2405SH30-RZ AM6TIW-2412SH30-RZ AM6TIW-2415SH30-RZ AM6TIW-2424SH30-RZ AM6TIW-4803SH30-RZ AM6TIW-4805SH30-RZ AM6TIW-4812SH30-RZ AM6TIW-4815SH30-RZ AM6TIW-4824SH30-RZ Models Dual output Model AM6TIW-2403D-RZ AM6TIW-2405D-RZ AM6TIW-2412D-RZ AM6TIW-2415D-RZ AM6TIW-2424D-RZ AM6TIW-4803D-RZ AM6TIW-4805D-RZ AM6TIW-4812D-RZ AM6TIW-4815D-RZ AM6TIW-4824D-RZ AM6TIW-2403DH30-RZ AM6TIW-2405DH30-RZ AM6TIW-2412DH30-RZ AM6TIW-2415DH30-RZ AM6TIW-2424DH30-RZ AM6TIW-4803DH30-RZ www.aimtec.com F 051e R12.B Under Voltage Lockout High efficiency up to 84% 24 Pin DIP Package Wide 4:1 input range Over Load Protection • • • • • Operating temperature -40oC to + 85oC Continuous short circuit protection Input / Output Isolation 1500 and 3000VDC Pin compatible with multiple manufacturers Input Under Voltage Protection Input Voltage (V) Output Voltage (V) Output Current max (mA) Efficiency (%) Capacitive load, max (μF) Isolation (VDC) 9-36 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 18-75 3.3 5 12 15 24 3.3 5 12 15 24 1400 1200 500 400 250 1400 1200 500 400 250 78 80 84 84 84 76 82 84 84 84 470 470 100 100 47 470 470 100 100 47 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 9-36 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 18-75 3.3 5 12 15 24 3.3 5 12 15 24 1400 1200 500 400 250 1400 1200 500 400 250 78 80 84 84 84 76 82 84 84 84 470 470 100 100 47 470 470 100 100 47 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 Input Voltage (V) Output Voltage (V) Output Current max (mA) Efficiency (%) Capacitive load, max (μF) Isolation (VDC) 9-36 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 18-75 ±3.3 ±5 ±12 ±15 ±24 ±3.3 ±5 ±12 ±15 ±24 ±909 ±600 ±250 ±200 ±125 ±909 ±600 ±250 ±200 ±125 78 82 84 84 82 78 82 84 84 80 ±220 ±220 ±100 ±100 ±47 ±220 ±220 ±100 ±100 ±47 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 9-36 9-36 9-36 9-36 9-36 18-75 ±3.3 ±5 ±12 ±15 ±24 ±3.3 ±909 ±600 ±250 ±200 ±125 ±909 78 82 84 84 82 78 ±220 ±220 ±100 ±100 ±47 ±220 3000 3000 3000 3000 3000 3000 Tel: +1 514 620 2722 1 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM6TIW-RZ 6 Watt | DC-DC Converter Models Dual output (continued) Model AM6TIW-4805DH30-RZ AM6TIW-4812DH30-RZ AM6TIW-4815DH30-RZ AM6TIW-4824DH30-RZ Input Voltage (V) 18-75 18-75 18-75 18-75 Input Specifications Parameters Peak Input Voltage time Under Voltage Lockout (ON / OFF) Parameters Output Specifications Parameters Voltage accuracy Voltage balance Short Circuit protection Short circuit restart Over current protection Line voltage regulation Cross regulation (Dual) Load voltage regulation Temperature coefficient Ripple & Noise Rising time Transient Recovery Time Transient Response Deviation General Specifications Parameters Start-up Time Switching frequency Operating temperature Storage temperature Max Case temperature Cooling Humidity Case material Weight www.aimtec.com F 051e R12.B ±600 ±250 ±200 ±125 20 -0.7-50 -0.7-100 100 8.5 / 7.0 16.5 / 14.5 20 Conditions ±220 ±100 ±100 ±47 Maximum Conditions LL – HL, 100% load 1 load=25-100%, other load=100% 0 – 100% load ±0.5 ±5 ms VDC mA p-p Rated Vin nom, 25% step VDC MOhm pF Maximum Units Continuous Auto recovery 160% Iout Typical 20 330 100% load (See Derating Chart) ±3 % %/oC mV p-p ms µs % Maximum Units +100 90 Non-Conductive Black Plastic (UL94V-0) 13 Tel: +1 514 620 2722 2 of 4 % % % % -40 to +85 -55 to +125 Free air convection Units 1500 or 3000 ±1.2 ±0.02 60 80 300 At 20MHz Bandwidth Units VDC Typical ±2 ±2 3000 3000 3000 3000 ms > 1000 1000 Vin nom, 100% load Balanced Load Isolation (VDC) VDC π (Pi) Network Typical 3 sec Capacitive load, max (μF) 82 84 84 80 9-36 18-75 24 Vin 48 Vin Conditions Efficiency (%) Typical 24 Vin 48 Vin Absolute Maximum Rating Tested I/O voltage Resistance Capacitance ±5 ±12 ±15 ±24 24 48 Filter Start up time Isolation Specifications Output Current max (mA) Nominal Voltage range Input Reflected Ripple Current Output Voltage (V) ms KHz o C o C o C % g Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM6TIW-RZ 6 Watt | DC-DC Converter General Specifications (continued) Parameters Dimensions(L x W x H) MTBF Conditions Typical Maximum Units Tolerance ±0.5 mm or ±0.02 inches 1.25 x 0.84 x 0.41 inches 31.75 x 21.35 x 10.50 mm >800,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications noted in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Parameters Agency Approval Standards CE, UL IEC/EN 60950-1 EN 55022 Class A EN 55024 Class A IEC61000-4-2, Perf. Criteria A IEC61000-4-3, Perf. Criteria A IEC61000-4-4, Perf. Criteria A IEC61000-4-5, Perf. Criteria A IEC61000-4-6, Perf. Criteria A IEC61000-4-8, Perf. Criteria A Pin Out Specifications Pin 2 3 9 11 14 16 22 23 1500 & 3500VDC Single Dual -V Input -V Input NO PIN N. C. +V Output -V Output +V Input +V Input www.aimtec.com F 051e R12.B Dimensions -V Input -V Input Common -V Output +V Output Common +V Input +V Input Tel: +1 514 620 2722 3 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM6TIW-RZ 6 Watt | DC-DC Converter Derating Free Air Convection 60 ºC Output Power % 100 80 60 Safe Operating Area 40 20 0 -40 -25 0 20 40 60 80 85 100 Ambient Temperature º C NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12.B Tel: +1 514 620 2722 4 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only