ILLS series Submersible Tank Gauging Level Transmitter Piezo-resistive sensor Stainless steel housing and diaphragm Accuracy <0.5% FS BFSL Various outputs including Volts and mA. Pressure ranges from 1mWG to 10mWG Options available on the IMTG transmitter. Pressure range Voltage or current output Cable length The ILLS is designed for use in continuous submersion in liquids such as water, oils and fuels in small tanks, where conventional mechanical level switches and sensors are not ideal and more level ‘control’ and measurement is required. Suitable applications Static tank level Container or chamber level Vehicle tank level IBC, IBC Tote or Pallet Tank Rainwater harvesting Performance Accuracy (Non-Linearity & Hysteresis) <±0.5% / FS (BFSL) The probe uses a piezo-resistive silicon sensing technology, isolated from the media by a diaphragm within the stainless steel housing It offers excellent stability, repeatability and resolution for applications where a small tank level is required, from as low as 1m through to 10 m high tanks. Each device is temperature compensated, calibrated and supplied with a traceable serial number and calibration certificate. Setting Errors (offsets) 2-wire 3-wire Zero & Full Scale, <±0.5% / FS Zero & Full Scale, <±0.5% / FS Permissible Load 2-wire 3-wire Rmax = [(Supply-9min)/0.02]W Rmin = 10kW Influence Effects Supply Load <0.005% FS / 1V 0.05% FSO / kW Custom versions can be made for particular applications. Electrical Protection Supply reverse polarity No damage/no function Electromagnetic compatibility CE Compliant Mechanical Stability Shock Vibration 100g / 11s 10g RMS (20 - 2000Hz) Temperatures & Thermal Effects Media Temperature -20ºC (Non-freezing) to +60ºC Storage temperature -20ºC to +70ºC Compensated temperature range 20ºC±25ºC Thermal Zero Shift (TZS) <±0.04% /FS/ºC Thermal Span Shift (TSS) <±0.015% /ºC Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:[email protected] Material Specifications Housing “O” ring seals Diaphragm Cable sheath material Media wetted parts sheath Weight Installation position 90º Operational life Insulation resistance 303 Stainless Steel Viton 316L Stainless Steel FEP standard Housing, “O” ring seal, diaphragm, cable Transmitter: approx 75g Cable: 48g per metre Any, small zero shift when tilted through 6 > 100x 10 cycles 50MW@50Vdc www.cynergy3.com ISO9001 C E R T I F I E D © 2014 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited. ILLS series Submersible Tank Gauging Level Transmitter Pressure Ranges and Passive mV/V Outputs Nominal Pressure, Gauge mW G Permissible Overpressure mW 1 20 2.5 20 5 10 7 50 Output Signals and Supply Voltages Wire systemOutput 2-wire 4-20mA Supply Voltage 9-32Vdc Connection +ve Supply -ve Supply Ground Cable Screen Wire Colours Brown White Pink Green 3-wire 9-32Vdc +ve Supply -ve Supply +ve Output Ground Cable Screen Brown White Yellow Pink Green 0.5-4.5Vdc non-ratiometric Care must be taken regarding screening and earthing when using voltage output Part No ILLS-G0100-5-003 ILLS-G0250-5-005 ILLS-G0500-5-007 ILLS-G0750-5-010 ILLS-G1000-5-015 ILLS-G0100-D-003 ILLS-G0250-D-005 ILLS-G0500-D-007 ILLS-G0750-D-010 ILLS-G1000-D-015 Pressure Range 0-1mWG (0-39"WG) 0-2.5mWG (0-98"WG) 0-5mWG (0-197"WG) 0-7.5mWG (0-276"WG) 0-10mWG (0-394"WG) 0-1mWG (0-39"WG) 0-2.5mWG (0-98"WG) 0-5mWG (0-197"WG) 0-7.5mWG (0-276"WG) 0-10mWG (0-394"WG) Cable Length 3M 5M 7M 10M 15M 3M 5M 7M 10M 15M 10 50 Output 4-20mA 4-20mA 4-20mA 4-20mA 4-20mA 0.5 to 4.5V 3Wire 0.5 to 4.5V 3Wire 0.5 to 4.5V 3Wire 0.5 to 4.5V 3Wire 0.5 to 4.5V 3Wire Mechanical Dimensions ISO9001 C E R T I F I E D www.cynergy3.com © 2014 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.