AZ9431 15 AMP MINIATURE PC BOARD RELAY FEATURES • • • • • • High performance Low seated height 6 kV surge version available Flux tight and sealed versions available Class B insulation (130°C) standard, Class F (155°C) available UL, CUR file E43203 CONTACTS Arrangement Ratings Medium Duty Heavy Duty SPST N.O. (1 Form A) SPDT (1 Form C) Max. switched power: 240 W or 1200 VA Max. switched current: 10 A Max. switched voltage: 150* VDC or 300 VAC Max. switched power: 360 W or 2500 VA Max. switched current: 15 A Max. switched voltage: 150* VDC or 300 VAC UL/CUR Ratings Medium Duty 10 10 Heavy Duty 10 15 15 A A A A A at at at at at 120 VAC, General Use 24 VDC, General Use 250 VAC, General Use 120 VAC, General Use 24 VDC, General Use *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Material Medium Duty: Silver cadmium oxide Heavy Duty: Silver tin oxide Resistance < 100 milliohms initially (24 V, 1 A method) COIL Power At Pickup Voltage Max Continuous Dissipation 203 mW 1.7 W at 20°C (68°F) Temperature Rise 22°C (40°F) (at nominal coil voltage) Temperature GENERAL DATA Life Expectancy Mechanical Electrical 1 x 106 1 x 105 at 10 A 120 VAC res. Operate Time 10 ms max. Release Time 5 ms max. (with no coil suppression) Dielectric Strength 3000 Vrms contact to coil (6 kV version) (at sea level for 1 min.) 1500 Vrms contact to coil 1000 Vrms across contacts Insulation Resistance 100 megohms min. at 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature At nominal coil voltage Operating Storage -40°C(-40°F) to 100°C(212°F) -40°C(-40°F) to 155°C(311°F) Vibration 0.062" DA at 10–55 Hz Shock 10 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 10 g Max. 130°C (266°F) Class B Max. 155°C (311°F) Class F NOTES 1. 2. 3. 4. All values at 20°C (68°F). Relay may pull in with less than “Must Operate” value. Unsealed relays should not be dip cleaned. Specifications subject to change without notice. 5/26/05W AZ9431 RELAY ORDERING DATA STANDARD RELAYS COIL SPECIFICATIONS Nominal Coil VDC 5 Max. Continuous VDC 10.9 ORDER NUMBER* Coil Resistance ±10% 70 Must Operate VDC 3.8 Medium Duty 10 Amp contact) Unsealed Sealed AZ9431–1C–5D AZ9431–1C–5DE Heavy duty (15 Amp contact) Unsealed Sealed AZ9431–1CH–5D AZ9431–1CH–5DE 6 13.0 100 4.5 AZ9431–1C–6D AZ9431–1C–6DE AZ9431–1CH–6D AZ9431–1CH–6DE 9 19.5 225 6.8 AZ9431–1C–9D AZ9431–1C–9DE AZ9431–1CH–9D AZ9431–1CH–9DE 12 26.0 400 9.0 AZ9431–1C–12D AZ9431–1C–12DE AZ9431–1CH–12D AZ9431–1CH–12DE 18 39.1 900 13.5 AZ9431-1C-18D AZ9431-1C-18DE AZ9431–1CH–18D AZ9431–1CH–18DE 24 52.1 1,600 18.0 AZ9431–1C–24D AZ9431–1C–24DE AZ9431–1CH–24D AZ9431–1CH–24DE 48 104.3 6,400 36.0 AZ9431–1C–48D AZ9431–1C–48DE AZ9431–1CH–48D AZ9431–1CH–48DE *Substitute “1A” or “1AH” in place of “1C” or “1CH” to indicate 1 Form A. Add suffix “F” for Class F version. Add “H” to AZ9431 for 6 kV version. MECHANICAL DATA PC Board Layout .762 Max [19.25] .134 [3.40] .612 Max [15.25] .059 [1.49] .236[6.0] .472 .602 Max [15.29] 12.00 .185 [4.70] .480 [12.20] .012 [.30] .559 [14.20] VIEWED TOWARD TERMINALS .014 [.36] Wiring Diagram 4 .016 2 .039 [1.0] 4 x .032 [0.8] 3 1 2 3 1 5 FORM 4 C 5 FORM A VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 5/26/05W