MTRONPTI CMO3CC 5 x 7 mm, 3.3 volt, cmos, clock oscillator Datasheet

CMO3 Series
5 x 7 mm, 3.3 Volt, CMOS, Clock Oscillator
CMO3 Series
THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS.
5x7mm Surface
PLEASE REFER TO THE M23.3V
PRODUCT
SERIES.Mount Crystal Clock Oscillators
Œ
Œ
Œ
Œ
CMOS Compatible
Tri-State Feature for Auto Test Systems
Tape & Reel Packaging
±20ppm Available - Please Contact Factory
E L E C T R I C A L S P E C I F I C AT I O N S
E L E C T R I C A LCMO3
S P E C I F I C AT I O N S
MODEL
MODEL Range (MHz)
Frequency
1.5 to CMO3
156.250
Frequency
Range (ppm)
(MHz)
Frequency
Stability
Frequency
Stability (ppm)
Overall
(Typical)
Overall (Typical)
0ºC to 70ºC
1.5 to 156.250
Inclusive of calibration, temperature, voltage, load, shock, vibration, aging
Inclusive of calibration, temperature, voltage, load, shock,vibration, aging
±25
0°C to 70°C
±25
-40ºC to +85ºC
±50
-40°C to +85°C
±50
Temperature Range (°C)
Temperature Range (°C)
Operating
Operating
-40°C
to +85°C
-40°C to +85°C
Storage
Storage
-40°C
to to
+125°C
-40°C
+125°C
Supply
Voltage
Supply
Voltage
(V)(V)
Input
Current
(mA)
Input
Current
(mA)
Symmetry (%) CMOS
Symmetry (%) CMOS
Transistion Times
Transition Time
TimeVdd
(ns)
20% Rise
to 80%
Fall Time (ns)
+3.3
±10%
+3.3
±10%
1.5MHz
to 35MHz
to to
100MHz
>100MHz
to 156.25MHz
>67 MHz
to 156.25 MHz
1.5 MHz
to 20 MHz
>20>35MHz
MHz to to
5050MHz
MHz >50MHz
>50 MHz
67 MHz
<10
<15
<25
<30 <55
<10
<20
<30
45/55
1.5MHz to 50MHz
1.5 MHz to 50
<5MHz
Rise Time (ns)
<5
Fall Time (ns)
<5
Load
“0” Level (VOL)
“1” Level (VOH)
45/55
>50MHz to 156.250MHz
>50 MHz to
<3 156.250 MHz
<3
<5
Load
15pF
0.3
<3
<3
15pF
3.0
“0” Level (VOL) max
10% Vdd
“1” Level (VOH) min
90% Vdd
Start up Time (ms)
<10
Start up Time (ms)
<10
PA R T N U M B E R I N G G U I D E
CMO3XXXC - Specify Frequency
“Blank” = 0oC to 70oC Operating Temp.
“M” = -40oC to 85oC Operating Temp.
“A” = ±25ppm (-40oC to 85oC Excluding Aging)
“B” = ±50ppm
“C” = ±100ppm
“D” = ±20ppm Excluding Aging (Contact Factory)
“Blank” = Fixed Frequency
“E” = Tri-State
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.
2553 N. Edgington Street, Franklin Park, IL 60131 y Phone: 847.451.1000 y Fax: 847.451.7585Revision: 03-01-07
CMO3 Series
3.3V 5x7mm Surface Mount Crystal Clock Oscillators
CMO3 Series
PIN
5 x 7 mm, 3.3 Volt, CMOS, Clock Oscillator
FUNCTION
1
N/C / Tri-State
2
Ground
3
CMO3 Series
Output
THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS.
+ VCC
4
PLEASE REFER TO THE M2 PRODUCT SERIES.
3.3V 5x7mm Surface Mount Crystal Clock Oscillators
PIN
FUNCTION
1
N/C / Tri-State
2
Ground
3
Output
4
+ VCC
OUTPUT WAVEFORM
TEST CIRCUIT DIAGRAM
OUTPUT WAVEFORM
TEST CIRCUIT DIAGRAM
MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS
TEST METHODS
REFERENCE PROCEDURES
DESCRIPTION
Temperature Cycle
MIL-STD-833, Mtd 1010, Cond. B
-55°C to +125°C; Air-to-Air; 100 cycles; 10
min. dwell
Mechanical Shock
MIL-STD-883, Mtd 2002, Cond. B
1500 g’s
Vibration
MIL-STD 883, Mtd 2007, Cond. B
20-2000 Hz; 0.06 inch; 15g’s; 3 planes
Humidity Steady State
MIL-STD-202, Mtd 103
40°C; 90%-95% R.H.; 56 days
Thermal Shock
MIL-STD-883, Mtd 1011.7 Cond. B
100°C to 0°C; Water-to-Water; 15 cycles
MIL-STD-883,
3015 Class II
REFERENCEMtd
PROCEDURES
2
KV to 4 KV Threshold
DESCRIPTION
MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS
Electrostatic
Discharge
TEST METHODS
Solderability
Temperature Cycle
Hermeticity
Mechanical to
Shock
Resistance
Soldering
MIL-STD-883,
MIL-STD-833,
MIL-STD-883,
MIL-STD-883,
MIL-STD-202,
Mtd
Mtd
Mtd
Mtd
2022.2
1010, Cond. B
1014.8, Cond. A1
2002,
210D, Cond.
Cond. BJ
Solder
dip;
Meniscograph
-55°C to
+125°C;
Air-to-Air;Criteria
100 cycles; 10
min.
dwell
Mass spectro. 2 x 10-8 atmos. CC/sec He
1500 g’s30 seconds
235°C;
Lead
Integrity
Vibration
MIL-STD-883,
2004.5,
Cond.
tension
& bend
stress
MIL-STD
883, Mtd 2007,
Cond.
B A, B1 Lead
20-2000
Hz; 0.06
inch;
15g’s; 3 planes
HumidityPermanence
Steady State
Marking
Thermal
Life
Test Shock
MIL-STD-202,
MIL-STD-883, Mtd 103
2015.8
MIL-STD-883, Mtd 1011.7
1005.6 Cond. B
Electrostatic Discharge
MIL-STD-883, Mtd 3015 Class II
Solderability
Hermeticity
MIL-STD-883, Mtd 2022.2
Solder dip; Meniscograph Criteria
MIL-STD-883,
Mtd 1014.8, Cond. A1
Mass spectro. 2 x 10-8 atmos. CC/sec He
800-888-1499 or www.champtech.com
40°C;
90%-95%
R.H.; 56 days
Resistance
to solvents
100°C
to
0°C;
Water-to-Water;
15 cycles
125°C, powered, 1000 hours minimum
2 KV to 4 KV Threshold
2553 N. Edgington Street, Franklin Park, IL 60131 y Phone: 847.451.1000 y Fax: 847.451.7585
235°C; 30 seconds
Resistance to Soldering MIL-STD-202, Mtd 210D, Cond. J
2 A, B1 Lead tension & bend stress
MIL-STD-883,
Mtd
2004.5,
Cond.
Lead
Integrity
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
MIL-STD-883,
2015.8
solvents
Marking
Permanence
Please
see www.mtronpti.com
for our complete
offering andMtd
detailed
datasheets. Contact us forResistance
your applicationtospecific
requirements: MtronPTI 1-800-762-8800.
Life Test
MIL-STD-883, Mtd 1005.6
125°C, powered, 1000 hours minimum
Revision: 03-01-07
2553 N. Edgington Street, Franklin Park, IL 60131 y Phone: 847.451.1000 y Fax: 847.451.7585
MtronPTI Lead Free Solder Profile
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.
Similar pages