ALUMINUM ELECTROLYTIC CAPACITORS QR Screw Terminal Type, High speed charge-discharge series Suited for high frequency regenerative voltage for AC servomotor, general inverter. Suited for equipment used at valtage fluctuating area. Suited for rectifier circuit of voltage doubler Available for adapted to the RoHS directive (2002/95/EC). QR Hi speed chargedischarge NX Specifications Item Performance Characteristics Category Temperature Range Rated Voltage Range Rated Capacitance Range – 25 ~ +85°C Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 5 minutes' application of rated voltage, leakage current is not more than 3 CV (µA) or 5 mA, whichever is smaller (at 20°C). [C : Rated Capacitance(µF), V : Voltage ( V ) ] 350 ~ 450V 680 ~ 15000µF (Measurement frequency:120Hz, tan δ Rated voltage (V) tan δ (MAX.) 350 0.15 Rated voltage (V) Stability at Low Temperature Temperature:20°C) 400 0.15 450 0.15 Measurement frequency : 120Hz 350 ~ 450 Z – 25°C / Z+20°C 8 Impedance ratio ZT/Z20(MAX.) Endurance of chargedischarge behavior After an application of charge-discharge voltage for 20million times (charge-discharge voltage difference(∆V)=rated voltage × 0.3, cycle 3Hz)capacitors shell meet the characteristics requirement listed at right Endurance After an application of DC voltage (in the range of rated voltage even after over-lapping the standard ripple current) for 5,000 hours at 85°C, capacitors meet the characteristics requirements listed at right. Shelf Life After storing the capacitors under no load at 85°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Marking Printed with white color letter on darkbrown sleeve. Capacitance change tan δ Leakage current Appearance Within ±20% of initial value 300% or less of initial specified value Initial specified value or less There shell be found to remarkable abnormality on the capacitor Capacitance change tan δ Leakage current Within ±20% of initial value 300% or less of initial specified value Initial specified value or less φ 51 ~ 90 Screw terminal type Drawing Bottom plate f 35 Screw terminal type ¡ 120 Hexagenal headed bolt Sleeve Pressure relief vent W±1 Sleeve 3.5 10 30¡ 45±1 35 +2MAX + S 12.7±1 Pressure relief vent h 7 10 T P ±2 A ±2 B H ±1 L+ MAX. 24 U S 15±0.5 P 6±1 +3MAX. T L B 3-leg brackets for φ90 capacitors have different hole shapes from the ordinary ones illustrated below. 29±1 U ±1 A ±2 Bottom plate D + 2 MAX. Hexagenal headed bolt (M5) P 5 Pressure relief vent 30¡ 7 Type numbering system (Example : 400V 1800µF) 1 2 3 4 5 6 7 8 9 10 11 φD 51 63.5 76.2 90 12 13 14 L QR 2 G 1 8 2 M S E F Mounting bracket Case dia. code Configuration Capacitance tolerance (±20%) Rated Capacitance (1800µF) Rated voltage (400V) Series name Type Configuration Cr (III) Plating (RoHS compliant) SE Resin bushing available upon request. Please contact us if PVCless products are required φD Code C 35 F 51 63.5 G 76.2 H J 90 (φ35) Code less 2-leg brackets BN No brackets (φ51 ~ φ90) Code less 3-leg brackets 2-leg brackets BB No brackets BN (mm) Dimension of terminal pitch (W) and length (R) and Nominal dia. of bolt W 22.0 28.6 31.8 31.8 α 3 3 3 3 R 6 6 6 6 Nominal dia. of bolt M5 M5 M5 M5 Dimension of mounting bracket φD Symbol P A T S U ° H h (mm) 3--Leg Leg shape 51 32.5 38.5 7.5 5.0 12 60 20 15 63.5 38.1 43 8.0 5.0 14 60 25 20 76.2 44.5 49.2 7.0 5.0 14 60 30 24 2--Leg 90 50.8 58.5 8.0 5.0 18 60 35 25 51 33.2 40 6.0 4.5 14 30 25 15 63.5 40.5 46.5 7.0 4.5 14 30 35 20 76.2 46.5 53 6.0 4.5 14 30 35 20 90 53 59 6.0 4.5 14 30 35 20 Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS QR series Dimensions 350V (2V) V (code) Surge Cap. (µF) 820 1000 1800 2200 Size φD × L(mm) 35 × 80 35 × 100 51 × 80 51 × 100 51 × 110 2700 63.5 × 80 3300 63.5 × 90 3900 4700 5600 51 × 130 63.5 × 110 76.2 × 80 51 × 170 76.2 × 900 63.5 × 150 76.2 × 110 63.5 × 170 6800 8200 10000 12000 15000 76.2 × 130 90 × 100 63.5 × 190 76.2 × 150 76.2 × 170 90 × 130 76.2 × 190 90 × 190 Rated ripple (Arms) 3.3 Surge Cap. (µF) 0.15 1.77 LQR2V102MSEC 820 7.2 0.15 2.38 LQR2V182MSEF 1500 9.1 0.15 2.63 LQR2V222MSEF 1800 10.8 0.15 2.91 LQR2V272MSEF 2200 10.6 0.15 2.91 LQR2V272MSEG 2700 12.4 0.15 3.22 LQR2V332MSEF 11.9 0.15 3.22 LQR2V332MSEG 14.6 0.15 3.50 LQR2V392MSEG 14.1 0.15 3.50 LQR2V392MSEH 17.0 0.15 3.84 LQR2V472MSEF 16.4 0.15 3.84 LQR2V472MSEH 20.4 0.15 4.20 LQR2V562MSEG 19.7 0.15 4.20 LQR2V562MSEH 23.5 0.15 4.62 LQR2V682MSEG 22.9 0.15 4.62 LQR2V682MSEH 22.5 0.15 4.62 LQR2V682MSEJ 27.1 0.15 5.00 26.4 0.15 31.1 1200 1500 35 × 110 51 × 80 51 × 100 51 × 110 2200 63.5 × 100 2700 76.2 × 80 51 × 130 51 × 150 63.5 × 130 76.2 × 100 63.5 × 150 76.2 × 110 90 × 90 63.5 × 170 4700 76.2 × 130 90 × 110 5600 63.5 × 190 6800 76.2 × 170 8200 10000 12000 35 × 80 3.2 450V Leakage Current tan δ Code (mA) LQR2G681MSEC 0.15 1.56 4.1 0.15 1.71 LQR2G821MSEC 7.5 0.15 2.32 LQR2G152MSEF 9.1 0.15 2.54 LQR2G182MSEF 10.4 0.15 2.81 LQR2G222MSEF 11.5 0.15 3.11 LQR2G272MSEG 13.7 0.15 3.44 LQR2G332MSEF 13.2 0.15 3.44 LQR2G332MSEG 16.0 0.15 3.74 LQR2G392MSEG 15.3 0.15 3.74 LQR2G392MSEH 18.7 0.15 4.11 LQR2G472MSEG 18.3 0.15 4.11 LQR2G472MSEH 22.0 0.15 4.48 LQR2G562MSEG 21.4 0.15 4.48 LQR2G562MSEH 25.4 0.15 4.94 LQR2G682MSEH 28.6 0.15 5.00 LQR2G822MSEH 27.8 0.15 5.00 LQR2G822MSEJ 32.7 0.15 5.00 LQR2G103MSEJ 37.6 0.15 5.00 LQR2G123MSEJ 43.0 0.15 5.00 LQR2G153MSEJ 35 × 100 51 × 80 51 × 90 51 × 110 63.5 × 900 51 × 150 63.5 × 110 3900 63.5 × 130 4700 63.5 × 150 5600 63.5 × 170 6800 76.2 × 150 76.2 × 900 76.2 × 110 76.2 × 130 8200 LQR2V822MSEG 10000 90 × 150 5.00 LQR2V822MSEH 12000 0.15 5.00 LQR2V103MSEH 15000 30.2 0.15 5.00 LQR2V103MSEJ 35.7 0.15 5.00 LQR2V123MSEH 40.5 0.15 5.00 LQR2V153MSEJ 90 × 130 90 × 170 90 × 220 500V Size φD × L(mm) 35 × 100 63.5 × 80 3900 Rated ripple (Arms) 450V (2W) 1800 3300 3300 Size φD × L(mm) 76.2 × 170 Surge 820 680 4.3 V (code) Cap. (µF) 680 400V (2G) V (code) 400V Leakage Current tan δ Code (mA) LQR2V821MSEC 0.15 1.60 90 × 130 90 × 150 90 × 190 90 × 220 Rated ripple (Arms) tan δ Leakage Current Code (mA) LQR2W681MSEC 1.65 3.5 0.15 3.9 0.15 1.82 LQR2W821MSEC 5.2 0.15 2.20 LQR2W122MSEF 6.3 0.15 2.46 LQR2W152MSEF 7.4 0.15 2.70 LQR2W182MSEF 7.9 0.15 2.70 LQR2W182MSEG 8.7 0.15 2.98 LQR2W222MSEF 8.6 0.15 2.98 LQR2W222MSEG 10.2 0.15 3.30 LQR2W272MSEF 10.0 0.15 3.30 LQR2W272MSEH 12.4 0.15 3.65 LQR2W332MSEG 11.8 0.15 3.65 LQR2W332MSEH 13.7 0.15 3.97 LQR2W392MSEG 14.1 0.15 3.97 LQR2W392MSEH 13.6 0.15 3.97 LQR2W392MSEJ 16.5 0.15 4.36 LQR2W472MSEG 16.3 0.15 4.36 LQR2W472MSEH 15.8 0.15 4.36 LQR2W472MSEJ 19.4 0.15 4.76 LQR2W562MSEG 19.1 0.15 4.76 LQR2W562MSEJ 23.3 0.15 5.00 LQR2W682MSEH 26.1 0.15 5.00 LQR2W822MSEJ 31.3 0.15 5.00 LQR2W103MSEJ 35.5 0.15 5.00 LQR2W123MSEJ Rated Ripple (Arms) at 85°C 120Hz Frequency coefficient of rated ripple current Frequency (Hz) Coefficient 60 0.82 120 1.00 360 1.20 1k 1.35 10k~ 1.40 CAT.8100V