ERC05-06 THRU ERC05-08 600V-800V 1.2A PLASTIC SILICON RECTIFIER FEATURES Low cost Diffused junction Low leakage Low forward voltage drop High current capability Easily cleaned with Freon,Alcohol,Isopropanol and similar solvents The plastic material carries U/L recognition 94V-0 MECHANICAL DATA Case:JEDEC DO--15,molded plastic Terminals: Axial lead ,solderable per MIL- STD-202,Method 208 Polarity: Color band denotes cathode Weight: 0.014 ounces,0.39 grams Mounting position: Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by 20%. ERC05 -06 ERC05 -08 UNITS Maximum recurrent peak reverse voltage VRRM 600 800 V Maximum RMS voltage V RMS 420 560 V Maximum DC blocking voltage VDC 600 800 V Maximum average forw ard rectified current 9.5mm lead length, @TA=75 IF(AV) 1.2 A IFSM 100.0 A VF 1.0 V Peak forw ard surge current 8.3ms single half-sine-w ave superimposed on rated load @TJ =125 Maximum instantaneous forw ard voltage @ 1.2 A Maximum reverse current at rated DC blocking voltage @TA=25 @TA=100 5.0 IR Typical junction capacitance (Note1) CJ 20 Typical thermal resistance (Note2) Rθ JA 40 TJ -55----+150 TSTG -55----+150 Operating junction temperature range Storage temperature range A 50.0 pF ／Ｗ NOTE: 1. Measured at 1.0MHz and applied rev erse v oltage of 4.0V DC. 2. Thermal resistance f rom junction to ambient. E-mail: [email protected] 1 of 2 Web Site: www.taychipst.com ERC05-06 THRU ERC05-08 600V-800V 1.2A PLASTIC SILICON RECTIFIER RATINGS AND CHARACTERISTIC CURVES FIG.1 -- FORWARD CHARACTERISTIC ERC05-06 THRU ERC05-08 FIG.2 -- JUNCTION CHARACTERISTICS 10 TJ=25 Pulse Width=300uS 1.4 AMPERES 1.2 1.0 0.4 0.1 0.04 0.01 0.6 0.7 0.9 1.1 1.3 1.5 1.7 1.9 100 JUNCTION CAPACITANCE,pF 2.0 60 40 20 10 4 TJ=25 f=1MHz 2 .1 .1 INSTANTANEOUS FORWARD VOLTAGE,VOLTS .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE,VOLTS FIG.3 -- FORWARD DERATING CURVE FIG.4 -- PEAK FORWARD SURGE CURRENT 160 2.4 140 2 TJ=125 8.3ms Single Half Sine-Wave 120 1.6 0.8 AMPERES AMPERES 100 1.2 Single Phase Half Wave 60HZ Resistive or Inductive Load 0.4 80 60 40 20 0 25 50 75 100 125 150 175 0 1 AMBIENT TEMPERATURE, E-mail: [email protected] 2 4 8 10 20 40 60 80 100 NUMBER OF CYCLES AT 60Hz 2 of 2 Web Site: www.taychipst.com