BAS85 www.vishay.com Vishay Semiconductors Small Signal Schottky Diode FEATURES • For general purpose applications • This diode features low turn-on voltage • The devices are protected by a PN junction guard ring against excessive voltage, such as electrostatic discharges • This diode is also available in a DO-35 case with type designation BAT85 • AEC-Q101 qualified • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 MECHANICAL DATA Case: MiniMELF SOD-80 APPLICATIONS Weight: approx. 31 mg • Applications where a very low forward voltage is required Cathode band color: black Packaging codes/options: GS18/10K per 13" reel (8 mm tape), 10K/box GS08/2.5K per 7" reel (8 mm tape), 12.5K/box PARTS TABLE PART ORDERING CODE INTERNAL CONSTRUCTION REMARKS BAS85 BAS85-GS18 or BAS85-GS08 Single diode Tape and reel ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER SYMBOL VALUE Continuous reverse voltage TEST CONDITION VR 30 V Forward continuous current (1) IF 200 mA IFM 300 mA tp < 1 s IFSM 600 mA Tamb = 65 °C Ptot 200 mW Peak forward current (1) Surge forward current (1) Power dissipation (1) UNIT Note (1) Valid provided that electrodes are kept at ambient temperature THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Thermal resistance junction to ambient air (1) Junction temperature Storage temperature range SYMBOL VALUE UNIT RthJA 430 K/W Tj 125 °C Tstg - 55 to + 150 °C Note (1) Valid provided that electrodes are kept at ambient temperature Rev. 1.9, 21-Jan-13 Document Number: 85510 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAS85 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. Reserve beakdown voltage IR = 10 μA (pulsed) V(BR) 30 Leakage current VR = 25 V IR Pulse test tp < 300 μs, IF = 0.1 mA TYP. MAX. UNIT V 2 μA VF 240 mV Pulse test tp < 300 μs, IF = 1 mA VF 320 mV Pulse test tp < 300 μs, IF = 10 mA VF 400 mV Pulse test tp < 300 μs, IF = 30 mA VF Pulse test tp < 300 μs, IF = 100 mA VF 800 mV VR = 1 V, f = 1 MHz CD 10 pF IF = 10 mA, IR = 10 mA, iR = 1 mA trr 5 ns Forward voltage Diode capacitance Reserve recovery time 0.2 500 mV 1000 200 VR = 30 V 180 IR - Reverse Current (µA) PR - Reverse Power Dissipation (mW) TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 160 140 RthJA = 540 kW 120 PR - Limit at 100 % VR 100 80 PR - Limit at 80 % VR 60 40 100 10 20 1 0 25 50 75 100 125 25 150 Fig. 1 - Max. Reverse Power Dissipation vs. Junction Temperature 50 75 100 125 150 Tj - Junction Temperature (°C) 15823 Tj - Junction Temperature (°C) 15822 Fig. 3 - Forward Current vs. Forward Voltage 10 CD - Diode Capacitance (pF) 1000 IF - Forward Current (mA) VR = VRRM Tj = 125 °C 100 Tj = 25 °C 10 1 f = 1 MHz 9 8 7 6 5 4 3 2 1 0 0.1 0 15824 0.5 1.0 VF - Forward Voltage (V) Fig. 2 - Reverse Current vs. Junction Temperature Rev. 1.9, 21-Jan-13 0.1 1.5 15825 1 10 100 VR - Reverse Voltage (V) Fig. 4 - Diode Capacitance vs. Reverse Voltage Document Number: 85510 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAS85 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): MiniMELF SOD-80 1.6 (0.063) 1.4 (0.055) Cathode indification * 0.47 (0.019) max. 3.7 (0.146) 3.3 (0.130) * The gap between plug and glass can be either on cathode or anode side 2.5 (0.098) max. 1.25 (0.49) min. 2 (0.079) min. Foot print recommendation: Document no.:6.560-5005.01-4 Rev. 8 - Date: 07.June.2006 5 (0.197) ref. 96 12070 Rev. 1.9, 21-Jan-13 Document Number: 85510 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: BAS85-GS08 BAS85-GS18