AUDIO PCB RIGHT ANGLED DC SOCKETS SECTION 6 Competitively priced Industry compatible PCB mounting SPECIFICATION Contact resistance (DCR 0.1A) 1, Initial, before any testing: (1) Between the terminals (NC): 30mΩ (2) Plug to sleeve, tip, ring (NO) contact: 50mΩ (1) Between the terminals (NC): 60mΩ (2) Plug to sleeve, tip, ring (NO) contact: 100mΩ 0.3kg - 1.5kg Terminals must withstand a 500g minimum pull for 10 seconds 0.3kg - 1.5kg before movement or break from housing occurs Terminal for PC board temperature: 260+ 5˚C for 5 + 1.0 seconds -25˚C to 80˚C More than 100MΩ by 500v DC at 90-95% RH, 40˚C Withstand 0.5mA 500v AC between any open terminal for one minute Withstand more than 5000 cycle’s insertion and withdrawal with testing plug 16vdc 20mA - 0.3A 2, After life test with mating plug: Insertion Force: Extraction Force: Soldering Heat: Operating Temperature range: Insulating Resistance: Voltage Test: Lifetime: Rated Voltage: Rated Current: OUTLINE DRAWING P.C.B. LAYOUT (+0.1) BOTTOM ORDERING INFORMATION DBC PJ 0202 1 Dubilier Connectors DC Jack Socket Connector Series 1 = 2.5mm Blank = 2mm 157 www.dubilier.co.uk AUDIO PCB STRAIGHT DC SOCKETS SECTION 6 Competitively priced Industry Compatible PCB Mounting SPECIFICATION Contact resistance (DCR 0.1A) 1, Initial, before any testing: (1) Between the terminals (NC): 30mΩ (2) Plug to sleeve, tip ,ring (NO) contact: 50mΩ (1) Between the terminals (NC): 60mΩ (2) Plug to sleeve, tip, ring (NO) contact: 100mΩ 0.3kg - 1.5kg Terminals must withstand a 500g minimum pull for 10 seconds 0.3kg - 1.5kg before movement or break from housing occurs Terminal for PC board temperature: 260 ± 5˚C for 5 ± 1.0 seconds -25˚C to 80˚C More than 100MΩ by 500v DC at 90 - 95% RH, 40˚C Withstand 0.5mA 500v AC between any open terminal for one minute Withstand more than 5000 cycle’s insertion and withdrawal with testing plug 16vdc 20mA - 0.3A 2, After life test with mating plug: Insertation Force: Extraction Force: Soldering Heat: Operating Temperature range: Insulating Resistance: Voltage Test: Lifetime: Rated Voltage: Rated Current: OUTLINE DRAWING + - 20.5 + - 0.5 3-ø1.40 ø2 +0 - 0.07 2-ø2.5 +-0.1 ORDERING INFORMATION DBC PJ 0204 1 Dubilier Connectors DC Jack Socket Connector Series 1 = 2.5mm Blank = 2mm 158 www.dubilier.co.uk AUDIO SMT DC JACK SOCKET SECTION 6 Competitively priced Industry compatible Surface Mount SPECIFICATION Contact resistance (DCR 0.1A) 1, Initial, before any testing: (1) Between the terminals (NC): 30mΩ (2) Plug to sleeve, tip, ring (NO) contact: 50mΩ (1) Between the terminals (NC): 60mΩ (2) Plug to sleeve, tip, ring (NO) contact: 100mΩ 0.3kg - 1.5kg Terminals must withstand a 500g minimum pull for 10 seconds 0.3kg - 1.5kg before movement or break from housing occurs Terminal for PC board temperature: 260+ 5˚C for 5 + 1.0 seconds -25˚C to 80˚C More than 100MΩ by 500v DC at 90-95% RH, 40˚C Withstand 0.5mA 500v AC between any open terminal for one minute Withstand more than 5000 cycle’s insertion and withdrawal with testing plug 16vdc 20mA - 0.3A 2, After life test with mating plug: Insertion Force: Extraction Force: Soldering Heat: Operating Temperature range: Insulating Resistance: Voltage Test: Lifetime: Rated Voltage: Rated Current: OUTLINE DRAWING 10.8 8.0 A 2.7 1.5 5.2 2 2.5 1 3 .0 Ø1 3.7 5.0 4-2.8 4.5 9.3 1 5.0 3.5 8.0 Ø 3.8 4.0 2.8 1 3 2 ORDERING INFORMATION DBC PJ 0217T -1.3 Dubilier Connectors DC Jack Socket Connector Series 1.3 = 1.3mm 1.0 = 1.0mm 159 www.dubilier.co.uk