Altera EP1S10 Package information datasheet for mature altera device Datasheet

Package Information Datasheet for
Mature Altera Devices
DS-PKG-16.8
This datasheet provides package and thermal resistance information for mature
Altera® devices. Package information includes the ordering code reference, package
acronym, leadframe material, lead finish (plating), JEDEC outline reference, lead
coplanarity, weight, moisture sensitivity level, and other special information. The
thermal resistance information includes device pin count, package name, and
resistance values.
This datasheet includes the following sections:
■
“Device and Package Cross Reference” on page 1
■
“Thermal Resistance” on page 23
■
“Package Outlines” on page 44
f
For more package and thermal resistance information about Altera devices that are
not listed in this datasheet, refer to the Package and Thermal Resistance page of the
Altera website.
f
For information about trays, tubes, and dry packs, refer to AN 71: Guidelines for
Handling J-Lead, QFP, and BGA Devices.
f
RoHS-compliant devices are compatible with leaded-reflow temperatures. For more
information, refer to Altera’s RoHS-Compliant Devices literature page.
Device and Package Cross Reference
Table 2 through Table 22 lists the device, package type, and number of pins for each
Altera device listed in this datasheet. Altera devices listed in this datasheet are
available in the following packages:
© December 2011
■
Ball-Grid Array (BGA)
■
Ceramic Pin-Grid Array (PGA)
■
FineLine BGA (FBGA)
■
Hybrid FineLine BGA (HBGA)
■
Plastic Dual In-Line Package (PDIP)
■
Plastic Enhanced Quad Flat Pack (EQFP)
■
Plastic J-Lead Chip Carrier (PLCC)
■
Plastic Quad Flat Pack (PQFP)
■
Power Quad Flat Pack (RQFP)
■
Thin Quad Flat Pack (TQFP)
■
Ultra FineLine BGA (UBGA)
Altera Corporation
Package Information Datasheet for Mature Altera Devices
2
Package Information Datasheet for Mature Altera Devices
Device and Package Cross Reference
Table 1 lists the Altera devices and the associated table locations.
Table 1. Mature Altera Device and Package Cross Reference
Altera Device
Arria®
series FPGAs
Stratix® series FPGAs
Cyclone® series FPGAs
MAX®
series CPLDs
HardCopy®
series ASICs
APEX™ series FPGAs
®
Table locations
■
Arria GX Devices: Table 2 on page 3
■
Stratix II Devices: Table 3 on page 3
■
Stratix Devices: Table 4 on page 5
■
Cyclone II Devices: Table 5 on page 7
■
Cyclone Devices: Table 6 on page 8
■
MAX 9000 Devices: Table 7 on page 8
■
MAX 7000 Devices: Table 8 on page 9
■
MAX 3000A Devices: Table 9 on page 10
■
HardCopy II Devices: Table 10 on page 11
■
HardCopy Devices: Table 11 on page 11
■
HardCopy APEX Devices: Table 12 on page 12
■
APEX II Devices: Table 13 on page 13
■
APEX 20KE Devices: Table 14 on page 13
■
APEX 20KC Devices: Table 15 on page 15
■
APEX 20K Devices: Table 16 on page 15
ACEX 1K FPGAs
ACEX 1K Devices: Table 17 on page 16
Mercury™ FPGAs
Mercury Devices: Table 18 on page 17
®
FLEX series FPGAs
■
FLEX 10KA Devices: Table 19 on page 17
■
FLEX 10KS Devices: Table 20 on page 18
■
FLEX 10KE Devices: Table 21 on page 18
Excalibur™ FPGAs
Excalibur Devices: Table 22 on page 21
Configuration devices
Configuration Devices: Table 23 on page 22
Enhanced configuration devices
Enhanced Configuration Devices: Table 24 on page 22
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Device and Package Cross Reference
3
Arria GX Devices
Table 2 lists the device name, package type, and number of pins for the Arria GX
device family.
1
The package type entries with “Option #” refer to instances where multiple package
options exist for a given package type and pin count. The option number identifies the
specific type used by the corresponding device density.
Table 2. Arria GX Devices
Device
EP1AGX20
EP1AGX35
EP1AGX50
EP1AGX60
EP1AGX90
Package
Pins
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 4
484
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 3
780
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single- Piece Lid: FBGA, Flip Chip, Option 4
484
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 3
780
Channel Lid: FBGA, Flip Chip, Option 1
484
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 3
780
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 2
1152
Channel Lid: FBGA, Flip Chip, Option 1
484
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 3
780
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 2
1152
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 2
1152
Stratix II Devices
Table 3 lists the device name, package type, and number of pins for the Stratix II
device family.
1
The package type entries with “Option #” refer to instances where multiple package
options exist for a given package type and pin count. The option number identifies the
specific type used by the corresponding device density.
Table 3. Stratix II Devices (Part 1 of 2)
Device
EP2S15
© December 2011
Altera Corporation
Package
Pins
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 4
484
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 4
672
Package Information Datasheet for Mature Altera Devices
4
Package Information Datasheet for Mature Altera Devices
Device and Package Cross Reference
Table 3. Stratix II Devices (Part 2 of 2)
Device
EP2S30
EP2S60
EP2S90
EP2S130
EP2S180
EP2SGX30
EP2SGX60
EP2SGX90
EP2SGX130
Package Information Datasheet for Mature Altera Devices
Package
Pins
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 4
484
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 4
672
Dual-Piece Lid: FBGA, Flip Chip, Option 1
484
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 4
672
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, option 2
1020
Channel Lid: HBGA, Flip Chip
484
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 3
780
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 2
1020
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 2
1508
Channel Lid: FBGA, Flip Chip, Option 1
780
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 2
1020
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 2
1508
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 2
1020
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 2
1508
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 3
780
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 3
780
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 2
1152
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 2
1152
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 2
1508
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 2
1508
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Device and Package Cross Reference
5
Stratix Devices
Table 4 lists the device name, package type, and number of pins for the Stratix device
family.
1
The package type entries with “Option #” refer to instances where multiple package
options exist for a given package type and pin count. The option number identifies the
specific type used by the corresponding device density.
Table 4. Stratix Devices (Part 1 of 2)
Device
EP1SGX10
EP1SGX25
EP1SGX40
EP1S10
EP1S20
EP1S25
EP1S30
© December 2011
Altera Corporation
Package
Pins
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 4
672
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 4
672
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 2
1020
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 2
1020
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 4
484
BGA, Wire Bond
672
FBGA, Wire Bond, Option 2
672
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 3
780
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 4
484
BGA, Wire Bond
672
FBGA, Wire Bond, Option 2
672
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 3
780
BGA, Wire Bond
672
FBGA, Wire Bond, Option 2
672
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 3
780
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 2
1020
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 3
780
Dual-Piece Lid: BGA, Flip Chip, Option 1
Single-Piece Lid: BGA, Flip Chip, Option 2
956
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 2
1020
Package Information Datasheet for Mature Altera Devices
6
Package Information Datasheet for Mature Altera Devices
Device and Package Cross Reference
Table 4. Stratix Devices (Part 2 of 2)
Device
EP1S40
EP1S60
EP1S80
Package Information Datasheet for Mature Altera Devices
Package
Pins
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 3
780
Dual-Piece Lid: BGA, Flip Chip, Option 1
Single-Piece Lid: BGA, Flip Chip, Option 2
956
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 2
1020
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 2
1508
Dual-Piece Lid: BGA, Flip Chip, Option 1
Single-Piece Lid: BGA, Flip Chip, Option 2
956
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 2
1020
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 2
1508
Dual-Piece Lid: BGA, Flip Chip, Option 1
Single-Piece Lid: BGA, Flip Chip, Option 2
956
Dual-Piece Lid: FBGA, Flip Chip, Option 1
1020
Dual-Piece Lid: FBGA, Flip Chip, Option 1
Single-Piece Lid: FBGA, Flip Chip, Option 2
1508
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Device and Package Cross Reference
7
Cyclone II Devices
Table 5 lists the device name, package type, and number of pins for the Cyclone II
device family.
1
The package type entries with “Option #” refer to instances where multiple package
options exist for a given package type and pin count. The option number identifies the
specific type used by the corresponding device density.
Table 5. Cyclone II Devices
Device
EP2C5
EP2C8
EP2C8A
EP2C15A
EP2C20
EP2C20A
EP2C35
EP2C50
EP2C70
© December 2011
Altera Corporation
Package
Pins
TQFP, Wire Bond
144
PQFP, Wire Bond
208
FBGA, Wire Bond, Option 2, Thin
256
TQFP, Wire Bond
144
PQFP, Wire Bond
208
FBGA, Wire Bond, Option 2, Thin
256
FBGA, Wire Bond, Option 2, Thin
256
FBGA, Wire Bond, Option 2, Thin
256
FBGA, Wire Bond, A:2.40
484
PQFP, Wire Bond
240
FBGA, Wire Bond, Option 2, Thin
256
FBGA, Wire Bond, A:2.40
484
FBGA, Wire Bond, Option 2, Thin
256
FBGA, Wire Bond, A:2.40
484
FBGA, Wire Bond, A:2.40
484
UBGA, Wire Bond
484
FBGA, Wire Bond, A:2.40
672
FBGA, Wire Bond, A:2.40
484
UBGA, Wire Bond
484
FBGA, Wire Bond, A:2.40
672
FBGA, Wire Bond, A:2.40
672
FBGA, Wire Bond, A:2.40
896
Package Information Datasheet for Mature Altera Devices
8
Package Information Datasheet for Mature Altera Devices
Device and Package Cross Reference
Cyclone Devices
Table 6 lists the device name, package type, and number of pins for the Cyclone
device family.
1
The package type entries with “Option #” refer to instances where multiple package
options exist for a given package type and pin count. The option number identifies the
specific type used by the corresponding device density.
Table 6. Cyclone Devices
Device
EP1C3
EP1C4
EP1C6
EP1C12
EP1C20
Package
Pins
TQFP, Wire Bond
100
TQFP, Wire Bond
144
FBGA, Wire Bond, Option 1
324
FBGA, Wire Bond
400
TQFP, Wire Bond
144
PQFP, Wire Bond
240
FBGA, Wire Bond, Option 1
256
PQFP, Wire Bond
240
FBGA, Wire Bond, Option 1
256
FBGA, Wire Bond, Option 1
324
FBGA, Wire Bond, Option 1
324
FBGA, Wire Bond
400
MAX 9000 Devices
Table 7 lists the device name, package type, and number of pins for the MAX 9000
device family.
Table 7. MAX 9000 Devices
Device
Package
Pins
EPM9320
BGA, Wire Bond
356
EPM9320A
BGA, Wire Bond
356
EPM9560
BGA, Wire Bond
356
MAX 7000 Devices
Table 8 lists the device name, package type, and number of pins for the MAX 7000
device family.
1
The package type entries with “Option #” refer to instances where multiple package
options exist for a given package type and pin count. The option number identifies the
specific type used by the corresponding device density.
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Device and Package Cross Reference
9
Table 8. MAX 7000 Devices (Part 1 of 2)
Device
EPM7032B
EPM7064B
EPM7128B
EPM7256B
EPM7512B
EPM7032AE
EPM7064AE
EPM7128AE
© December 2011
Altera Corporation
Package
Pins
PLCC, Wire Bond
44
TQFP, Wire Bond
44
UBGA, Wire Bond
49
TQFP, Wire Bond
44
UBGA, Wire Bond
49
FBGA, Wire Bond, Option 1
100
TQFP, Wire Bond
100
UBGA, Wire Bond
49
TQFP, Wire Bond
100
FBGA, Wire Bond, Option 1
100
TQFP, Wire Bond
144
UBGA, Wire Bond
169
FBGA, Wire Bond, Option 1
256
TQFP, Wire Bond
100
TQFP, Wire Bond
144
UBGA, Wire Bond
169
PQFP, Wire Bond
208
FBGA, Wire Bond, Option 1
256
TQFP, Wire Bond
144
UBGA, Wire Bond
169
PQFP, Wire Bond
208
FBGA, Wire Bond, Option 1
256
BGA, Wire Bond, Option 1
256
PLCC, Wire Bond
44
TQFP, Wire Bond
44
PLCC, Wire Bond
44
UBGA, Wire Bond
49
FBGA, Wire Bond, Option 1
100
TQFP, Wire Bond
44
TQFP, Wire Bond
100
FBGA, Wire Bond, Option 1
256
PLCC, Wire Bond
84
FBGA, Wire Bond, Option 1
100
TQFP, Wire Bond
100
TQFP, Wire Bond
144
UBGA, Wire Bond
169
FBGA, Wire Bond, Option 1
256
Package Information Datasheet for Mature Altera Devices
10
Package Information Datasheet for Mature Altera Devices
Device and Package Cross Reference
Table 8. MAX 7000 Devices (Part 2 of 2)
Device
EPM7256AE
EPM7512AE
EPM7032A
EPM7128A
EPM7256A
EPM7192E
Package
Pins
TQFP, Wire Bond
100
FBGA, Wire Bond, Option 1
100
TQFP, Wire Bond
144
PQFP, Wire Bond
208
FBGA, Wire Bond, Option 1
256
TQFP, Wire Bond
144
PQFP, Wire Bond
208
BGA, Wire Bond, Option 1
256
FBGA, Wire Bond, Option 1
256
PLCC, Wire Bond
44
TQFP, Wire Bond
44
PLCC, Wire Bond
84
TQFP, Wire Bond
100
FBGA, Wire Bond
100
TQFP, Wire Bond
144
FBGA, Wire Bond, Option 1
256
TQFP, Wire Bond
100
TQFP, Wire Bond
144
PQFP, Wire Bond
208
FBGA, Wire Bond, Option 1
256
PGA, Wire Bond
160
PQFP, Wire Bond
160
MAX 3000A Devices
Table 8 lists the device name, package type, and number of pins for the MAX 3000A
device family.
1
The package type entries with “Option #” refer to instances where multiple package
options exist for a given package type and pin count. The option number identifies the
specific type used by the corresponding device density.
Table 9. MAX 3000A Devices (Part 1 of 2)
Device
EPM3032A
EPM3064A
EPM3128A
Package Information Datasheet for Mature Altera Devices
Package
Pins
PLCC, Wire Bond
44
TQFP, Wire Bond
44
TQFP, Wire Bond
44
PLCC, Wire Bond
44
TQFP, Wire Bond
100
TQFP, Wire Bond
100
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Device and Package Cross Reference
11
Table 9. MAX 3000A Devices (Part 2 of 2)
Device
EPM3256A
EPM3512A
Package
Pins
TQFP, Wire Bond
144
PQFP, Wire Bond
208
PQFP, Wire Bond
208
FBGA, Wire Bond, Option 1
256
HardCopy II Devices
Table 10 lists the device name, package type, and number of pins for the HardCopy II
device family.
1
The package type entries with “Option #” refer to instances where multiple package
options exist for a given package type and pin count. The option number identifies the
specific type used by the corresponding device density.
Table 10. HardCopy II Devices
Device
HC210
HC220
HC230
HC240
Package
Pins
FBGA, Wire Bond, A:2.40
484
Single-Piece Lid: FBGA, Flip Chip, Option 4
672
Single-Piece Lid: FBGA, Flip Chip, Option 3
780
Single-Piece Lid: FBGA, Flip Chip, Option 2
1020
Single-Piece Lid: FBGA, Flip Chip, Option 2
1020
Single-Piece Lid: FBGA, Flip Chip, Option 2
1508
HardCopy Devices
Table 11 lists the device name, package type, and number of pins for the HardCopy
device family.
1
The package type entries with “Option #” refer to instances where multiple package
options exist for a given package type and pin count. The option number identifies the
specific type used by the corresponding device density.
Table 11. HardCopy Devices
Device
Pins
FBGA, Wire Bond, A:2.40
672
BGA, Wire Bond
672
HC1S30
Dual-Piece Lid: FBGA, Flip Chip, Option 1
780
HC1S40
Dual-Piece Lid: FBGA, Flip Chip, Option 1
780
HC1S60
Dual-Piece Lid: FBGA, Flip Chip, Option 1
1020
HC1S80
Dual-Piece Lid: FBGA, Flip Chip, Option 1
1020
HC1S25
© December 2011
Package
Altera Corporation
Package Information Datasheet for Mature Altera Devices
12
Package Information Datasheet for Mature Altera Devices
Device and Package Cross Reference
HardCopy APEX Devices
Table 12 lists the device name, package type, and number of pins for the
HardCopy APEX device family.
1
The package type entries with “Option #” refer to instances where multiple package
options exist for a given package type and pin count. The option number identifies the
specific type used by the corresponding device density.
Table 12. HardCopy APEX Devices
Device
HC20K400
HC20K600
Package Information Datasheet for Mature Altera Devices
Package
Pins
BGA, Wire Bond, Option 3
652
BGA, Wire Bond, Option 3
652
Dual-Piece Lid: FBGA, Flip Chip, Option 1
672
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Device and Package Cross Reference
13
APEX II Devices
Table 13 lists the device name, package type, and number of pins for the APEX II
device family.
1
The package type entries with “Option #” refer to instances where multiple package
options exist for a given package type and pin count. The option number identifies the
specific type used by the corresponding device density.
Table 13. APEX II Devices
Device
EP2A15
EP2A25
EP2A40
EP2A70
Package
Pins
Dual-Piece Lid: FBGA, Flip Chip, Option 1
672
Dual-Piece Lid: BGA, Flip Chip
724
Channel Lid: FBGA, Flip Chip, Option 1
672
Dual-Piece Lid: BGA, Flip Chip
724
Dual-Piece Lid: FBGA, Flip Chip, Option 1
1020
Channel Lid: FBGA, Flip Chip, Option 1
672
Dual-Piece Lid: BGA, Flip Chip
724
Dual-Piece Lid: FBGA, Flip Chip, Option 1
1020
Dual-Piece Lid: BGA, Flip Chip
724
Dual-Piece Lid: FBGA, Flip Chip, Option 1
1508
APEX 20KE Devices
Table 14 lists the device name, package type, and number of pins for the APEX 20KE
device family.
1
The package type entries with “Option #” refer to instances where multiple package
options exist for a given package type and pin count. The option number identifies the
specific type used by the corresponding device density.
Table 14. APEX 20KE Devices (Part 1 of 2)
Device
EP20K30E
EP20K60E
© December 2011
Altera Corporation
Package
Pins
FBGA, Wire Bond
144
TQFP, Wire Bond
144
PQFP, Wire Bond
208
FBGA, Wire Bond, Option 1
324
FBGA, Wire Bond
144
TQFP, Wire Bond
144
PQFP, Wire Bond
208
PQFP, Wire Bond
240
FBGA, Wire Bond, Option 1
324
BGA, Wire Bond
356
Package Information Datasheet for Mature Altera Devices
14
Package Information Datasheet for Mature Altera Devices
Device and Package Cross Reference
Table 14. APEX 20KE Devices (Part 2 of 2)
Device
EP20K100E
EP20K160E
EP20K200E
EP20K300E
EP20K400E
EP20K600E
EP20K1000E
EP20K1500E
Package Information Datasheet for Mature Altera Devices
Package
Pins
FBGA, Wire Bond
144
TQFP, Wire Bond
144
PQFP, Wire Bond
208
PQFP, Wire Bond
240
FBGA, Wire Bond, Option 1
324
BGA, Wire Bond
356
TQFP, Wire Bond
144
PQFP, Wire Bond
208
PQFP, Wire Bond
240
BGA, Wire Bond
356
FBGA, Wire Bond, Option 2
484
PQFP, Wire Bond
208
PQFP, Wire Bond
240
BGA, Wire Bond
356
FBGA, Wire Bond, Option 2
484
BGA, Wire Bond, Option 2
652
FBGA, Wire Bond, Option 2
672
PQFP, Wire Bond
240
BGA, Wire Bond, Option 2
652
FBGA, Wire Bond, Option 2
672
BGA, Wire Bond, Option 3
652
FBGA, Flip Chip, Option 1
672
BGA, Wire Bond, Option 3
652
FBGA, Flip Chip, Option 1
672
FBGA, Flip Chip, Option 1
1020
BGA, Flip Chip
652
FBGA, Flip Chip, Option 1
672
FBGA, Flip Chip, Option 1
1020
BGA, Flip Chip
652
FBGA, Flip Chip, Option 1
1020
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Device and Package Cross Reference
15
APEX 20KC Devices
Table 15 lists the device name, package type, and number of pins for the APEX 20KC
device family.
1
The package type entries with “Option #” refer to instances where multiple package
options exist for a given package type and pin count. The option number identifies the
specific type used by the corresponding device density.
Table 15. APEX 20KC Devices
Device
EP20K200C
EP20K400C
EP20K600C
EP20K1000C
Package
Pins
PQFP, Wire Bond
208
PQFP, Wire Bond
240
BGA, Wire Bond
356
FBGA, Wire Bond, Option 2
484
BGA, Wire Bond, Option 3
652
FBGA, Flip Chip, Option 1
672
BGA, Wire Bond, Option 3
652
FBGA, Flip Chip, Option 1
672
FBGA, Flip Chip, Option 1
1020
BGA, Flip Chip
652
FBGA, Flip Chip, Option 1
672
FBGA, Flip Chip, Option 1
1020
APEX 20K Devices
Table 16 lists the device name, package type, and number of pins for the APEX 20K
device family.
1
The package type entries with “Option #” refer to instances where multiple package
options exist for a given package type and pin count. The option number identifies the
specific type used by the corresponding device density.
Table 16. APEX 20K Devices (Part 1 of 2)
Device
EP20K100
EP20K160
© December 2011
Altera Corporation
Package
Pins
TQFP, Wire Bond
144
PQFP, Wire Bond
208
PQFP, Wire Bond
240
FBGA, Wire Bond, Option 1
324
BGA, Wire Bond
356
PQFP, Wire Bond
240
TQFP, Wire Bond
144
Package Information Datasheet for Mature Altera Devices
16
Package Information Datasheet for Mature Altera Devices
Device and Package Cross Reference
Table 16. APEX 20K Devices (Part 2 of 2)
Device
EP20K200
EP20K300
EP20K400
Package
Pins
PQFP, Wire Bond
208
PQFP, Wire Bond
240
BGA, Wire Bond
356
FBGA, Wire Bond, Option 2
484
FBGA, Wire Bond, Option 2
672
BGA, Wire Bond, Option 3
652
PGA, Wire Bond
655
FBGA, Flip Chip, Option 1
672
ACEX 1K Devices
Table 17 lists the device name, package type, and number of pins for the ACE 1K
device family.
1
The package type entries with “Option #” refer to instances where multiple package
options exist for a given package type and pin count. The option number identifies the
specific type used by the corresponding device density.
Table 17. ACEX 1K Devices
Device
EP1K10
EP1K30
EP1K50
EP1K100
Package Information Datasheet for Mature Altera Devices
Package
Pins
TQFP, Wire Bond
100
TQFP, Wire Bond
144
PQFP, Wire Bond
208
FBGA, Wire Bond, Option 1
256
TQFP, Wire Bond
144
PQFP, Wire Bond
208
FBGA, Wire Bond, Option 1
256
TQFP, Wire Bond
144
PQFP, Wire Bond
208
FBGA, Wire Bond, Option 1
256
FBGA, Wire Bond, Option 2
484
PQFP, Wire Bond
208
FBGA, Wire Bond, Option 1
256
FBGA, Wire Bond, Option 2
484
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Device and Package Cross Reference
17
Mercury Devices
Table 18 lists the device name, package type, and number of pins for the Mercury
device family.
1
The package type entries with “Option #” refer to instances where multiple package
options exist for a given package type and pin count. The option number identifies the
specific type used by the corresponding device density.
Table 18. Mercury Devices
Device
Package
Pins
EP1M120
Dual-Piece Lid: FBGA, Flip Chip, Option 1
484
EP1M350
Dual-Piece Lid: FBGA, Flip Chip, Option 1
780
FLEX 10KA Devices
Table 19 lists the device name, package type, and number of pins for the FLEX 10KA
device family.
1
The package type entries with “Option #” refer to instances where multiple package
options exist for a given package type and pin count. The option number identifies the
specific type used by the corresponding device density.
Table 19. FLEX 10KA Devices
Device
EPF10K10A
EPF10K30A
EPF10K100A
EPF10K250A
© December 2011
Altera Corporation
Package
Pins
TQFP, Wire Bond
100
TQFP, Wire Bond
144
PQFP, Wire Bond
208
FBGA, Wire Bond, Option 1
256
TQFP, Wire Bond
144
PQFP, Wire Bond
208
PQFP, Wire Bond
240
FBGA, Wire Bond, Option 1
256
BGA, Wire Bond
356
FBGA, Wire Bond, Option 2
484
RQFP, Wire Bond
240
BGA, Wire Bond
356
FBGA, Wire Bond, Option 2
484
BGA, Wire Bond
600
PGA, Wire Bond
599
BGA, Wire Bond
600
Package Information Datasheet for Mature Altera Devices
18
Package Information Datasheet for Mature Altera Devices
Device and Package Cross Reference
FLEX 10KS Devices
Table 20 lists the device name, package type, and number of pins for the FLEX 10KS
device family.
1
The package type entries with “Option #” refer to instances where multiple package
options exist for a given package type and pin count. The option number identifies the
specific type used by the corresponding device density.
Table 20. FLEX 10KS Devices
Device
EPF10K50S
EPF10K200S
Package
Pins
TQFP, Wire Bond
144
PQFP, Wire Bond
208
PQFP, Wire Bond
240
FBGA, Wire Bond, Option 1
256
BGA, Wire Bond
356
FBGA, Wire Bond, Option 2
484
RQFP, Wire Bond
240
BGA, Wire Bond
356
FBGA, Wire Bond, Option 2
484
BGA, Wire Bond
600
FBGA, Wire Bond, Option 2
672
FLEX 10KE Devices
Table 21 lists the device name, package type, and number of pins for the FLEX 10KE
device family.
1
The package type entries with “Option #” refer to instances where multiple package
options exist for a given package type and pin count. The option number identifies the
specific type used by the corresponding device density.
Table 21. FLEX 10KE Devices (Part 1 of 3)
Device
EPF10K30E
EPF10K50E
Package Information Datasheet for Mature Altera Devices
Package
Pins
TQFP, Wire Bond
144
PQFP, Wire Bond
208
FBGA, Wire Bond, Option 1
256
FBGA, Wire Bond, Option 2
484
TQFP, Wire Bond
144
PQFP, Wire Bond
208
PQFP, Wire Bond
240
FBGA, Wire Bond, Option 1
256
BGA, Wire Bond
356
FBGA, Wire Bond, Option 2
484
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Device and Package Cross Reference
19
Table 21. FLEX 10KE Devices (Part 2 of 3)
Device
EPF10K100E
EPF10K130E
EPF10K200E
EPF10K10
EPF10K20
EPF10K30
EPF10K40
EPF10K50
EPF10K50V
EPF10K70
EPF10K100
EPF10K130V
EPF6010A
© December 2011
Altera Corporation
Package
Pins
PQFP, Wire Bond
208
PQFP, Wire Bond
240
FBGA, Wire Bond, Option 1
256
BGA, Wire Bond
356
FBGA, Wire Bond, Option 2
484
PQFP, Wire Bond
240
BGA, Wire Bond
356
FBGA, Wire Bond, Option 2
484
BGA, Wire Bond
600
FBGA, Wire Bond, Option 2
672
PGA, Wire Bond
599
BGA, Wire Bond
600
FBGA, Wire Bond, Option 2
672
PLCC, Wire Bond
84
TQFP, Wire Bond
144
PQFP, Wire Bond
208
TQFP, Wire Bond
144
RQFP, Wire Bond
208
RQFP, Wire Bond
240
RQFP, Wire Bond
208
RQFP, Wire Bond
240
BGA, Wire Bond
356
RQFP, Wire Bond
208
RQFP, Wire Bond
240
RQFP, Wire Bond
240
BGA, Wire Bond
356
PGA, Wire Bond
403
RQFP, Wire Bond
240
PQFP, Wire Bond
240
BGA, Wire Bond
356
FBGA, Wire Bond
484
RQFP, Wire Bond
240
PGA, Wire Bond
503
PGA, Wire Bond
503
PGA, Wire Bond
599
BGA, Wire Bond
600
TQFP, Wire Bond
100
TQFP, Wire Bond
144
PQFP, Wire Bond
208
Package Information Datasheet for Mature Altera Devices
20
Package Information Datasheet for Mature Altera Devices
Device and Package Cross Reference
Table 21. FLEX 10KE Devices (Part 2 of 3)
Device
EPF10K100E
EPF10K130E
EPF10K200E
EPF10K10
EPF10K20
EPF10K30
EPF10K40
EPF10K50
EPF10K50V
EPF10K70
EPF10K100
EPF10K130V
EPF6010A
Package Information Datasheet for Mature Altera Devices
Package
Pins
PQFP, Wire Bond
208
PQFP, Wire Bond
240
FBGA, Wire Bond, Option 1
256
BGA, Wire Bond
356
FBGA, Wire Bond, Option 2
484
PQFP, Wire Bond
240
BGA, Wire Bond
356
FBGA, Wire Bond, Option 2
484
BGA, Wire Bond
600
FBGA, Wire Bond, Option 2
672
PGA, Wire Bond
599
BGA, Wire Bond
600
FBGA, Wire Bond, Option 2
672
PLCC, Wire Bond
84
TQFP, Wire Bond
144
PQFP, Wire Bond
208
TQFP, Wire Bond
144
RQFP, Wire Bond
208
RQFP, Wire Bond
240
RQFP, Wire Bond
208
RQFP, Wire Bond
240
BGA, Wire Bond
356
RQFP, Wire Bond
208
RQFP, Wire Bond
240
RQFP, Wire Bond
240
BGA, Wire Bond
356
PGA, Wire Bond
403
RQFP, Wire Bond
240
PQFP, Wire Bond
240
BGA, Wire Bond
356
FBGA, Wire Bond
484
RQFP, Wire Bond
240
PGA, Wire Bond
503
PGA, Wire Bond
503
PGA, Wire Bond
599
BGA, Wire Bond
600
TQFP, Wire Bond
100
TQFP, Wire Bond
144
PQFP, Wire Bond
208
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Device and Package Cross Reference
21
Table 21. FLEX 10KE Devices (Part 3 of 3)
Device
EPF6016
EPF6016A
EPF6024A
EPF8282A
EPF8452A
Package
Pins
TQFP, Wire Bond
144
PQFP, Wire Bond
208
PQFP, Wire Bond
240
BGA, Wire Bond, Option 2
256
TQFP, Wire Bond
100
FBGA, Wire Bond
100
TQFP, Wire Bond
144
PQFP, Wire Bond
208
FBGA, Wire Bond, Option 1
256
TQFP, Wire Bond
144
PQFP, Wire Bond
208
PQFP, Wire Bond
240
BGA, Wire Bond, Option 2
256
FBGA, Wire Bond, Option 1
256
PLCC, Wire Bond
84
TQFP, Wire Bond
100
TQFP, Wire Bond
100
PQFP, Wire Bond
160
Excalibur Devices
Table 22 lists the device name, package type, and number of pins for the Excalibur
device family.
1
The package type entries with “Option #” refer to instances where multiple package
options exist for a given package type and pin count. The option number identifies the
specific type used by the corresponding device density.
Table 22. Excalibur Devices
Device
EPXA1
EPXA4
EPXA10
© December 2011
Altera Corporation
Package
Pins
FBGA, Wire Bond, Option 2
484
Dual-Piece Lid: FBGA, Flip Chip, Option 1
672
Dual-Piece Lid: FBGA, Flip Chip, Option 1
672
Dual-Piece Lid: FBGA, Flip Chip, Option 1
1020
Dual-Piece Lid: FBGA, Flip Chip, Option 1
1020
Package Information Datasheet for Mature Altera Devices
22
Package Information Datasheet for Mature Altera Devices
Device and Package Cross Reference
Configuration Devices
Table 23 lists the device name, package type, and number of pins for the
Configuration device family.
1
The package type entries with “Option #” refer to instances where multiple package
options exist for a given package type and pin count. The option number identifies the
specific type used by the corresponding device density.
Table 23. Configuration Devices
Device
EPC1
EPC2
EPC1064
EPC1213
EPC1441
Package
Pins
PDIP, Wire Bond
8
PLCC, Wire Bond
20
PLCC, Wire Bond
20
TQFP, Wire Bond
32
PDIP, Wire Bond
8
PLCC, Wire Bond
20
PDIP, Wire Bond
8
PLCC, Wire Bond
20
PDIP, Wire Bond
8
PLCC, Wire Bond
20
TQFP, Wire Bond
32
Enhanced Configuration Devices
Table 24 lists the device name, package type, and number of pins for the Enhanced
configuration device family.
1
The package type entries with “Option #” refer to instances where multiple package
options exist for a given package type and pin count. The option number identifies the
specific type used by the corresponding device density.
Table 24. Enhanced Configuration Devices
Device
Package
Pins
EPC4
PQFP, Wire Bond
100
EPC8
PQFP, Wire Bond
100
UBGA, Wire Bond
88
PQFP, Wire Bond
100
EPC16
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Thermal Resistance
23
Thermal Resistance
Altera follows JEDEC JESD51 series standards to provide thermal resistances. The
purpose of the JESD51 standards is to compare the thermal performance of various
packages under standardized test conditions. While standardized thermal resistances
can help compare the relative thermal performance of different packages, they cannot
apply directly to the many specific applications because JESD51 test conditions may
not match a specific application. Several factors affect the thermal performance of a
device in a user’s application. These include power dissipation in the component;
airflow velocity, direction and turbulence level; power in adjacent components;
two-sided vs. one-sided active component mounting; printed circuit board (PCB)
orientation & construction; and adjacent boards and their power dissipation. It may
be necessary to test or model specific applications. This testing and modeling of a
component user’s specific applications is the user’s responsibility.
Table 26throughTable 43provideJA (junction-to-ambientthermalresistance)andJC
(junction-to-case thermal resistance) values for the Altera device families. Altera
reserves the right to make changes to thermal resistances without notice in the future.
Table 25 lists the mature Altera devices and the associated table locations.
Table 25. Thermal Resistance
Altera Device
Arria series FPGAs
Stratix series FPGAs
Cyclone series FPGAs
MAX series CPLDs
HardCopy series ASICs
APEX series FPGAs
Table Location
■
Arria GX Devices: Table 26 on page 24
■
Stratix II Devices: Table 27 on page 25
■
Stratix Devices: Table 28 on page 26
■
Cyclone II Devices: Table 29 on page 27
■
Cyclone Devices: Table 30 on page 28
■
MAX 9000 Devices: Table 31 on page 29
■
MAX 7000 Devices: Table 32 on page 30
■
MAX 3000A Devices: Table 33 on page 33
■
HardCopy II Devices: Table 34 on page 34
■
HardCopy Devices: Table 35 on page 34
■
APEX II Devices: Table 36 on page 35
■
APEX 20K: Table 37 on page 36
ACEX 1K FPGAs
ACEX 1K Devices: Table 38 on page 38
Mercury FPGAs
Mercury Devices: Table 39 on page 39
FLEX series FPGAs
Excalibur FPGAs
■
FLEX 10K Devices: Table 40 on page 39
■
FLEX 8000 Devices: Table 41 on page 41
■
FLEX 6000 Devices: Table 42 on page 42
Excalibur Devices: Table 43 on page 43
Altera is transitioning to an industry-standard copper lid for its thermally enhanced
BGA and thermally enhanced Flip Chip FBGA package offerings.
f
© December 2011
Altera Corporation
For more information, refer to Process Change Notice PCN0214.
Package Information Datasheet for Mature Altera Devices
24
Package Information Datasheet for Mature Altera Devices
Thermal Resistance
This change affects the APEX 20KE, APEX 20KC, APEX II, Mercury, and Excalibur
device families. Therefore, two thermal resistance specifications are provided for
devices affected by this change. The older packages are identified as using the
aluminum silicon carbide (AlSiC) lid, while the newer packages are identified as
using the copper (Cu) lid.
Thermally enhanced BGA and thermally enhanced Flip Chip FBGA packages offered
in the newer Altera families, including Stratix and Stratix GX, were introduced using
an industry-standard Cu lid. Therefore, these device specifications include only a
single thermal resistance specification.
1
Contact Altera if you need typical +/– values of A dimensions for thermal analysis.
The max numbers are provided for physical layout.
Arria Series Devices Thermal Resistance
Table 26 provides thermal resistance values for Arria series devices.
Arria GX Devices
Table 26 lists the thermal resistance of Arria GX devices.
Table 26. Thermal Resistance of Arria GX Devices
Device
EP1AGX20
EP1AGX35
EP1AGX50
EP1AGX60
EP1AGX90
Package
Pin
Count
JA
(° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA
(° C/W)
400 ft./min.
JC
(° C/W)
JB
(° C/W)
FBGA
484
12.8
10.3
8.7
7.5
0.3
3.1
FBGA
780
11.1
8.6
7.2
6.0
0.2
3.1
FBGA
484
12.8
10.3
8.7
7.5
0.3
3.1
FBGA
780
11.1
8.6
7.2
6.0
0.2
3.1
FBGA
484
12.7
10.2
8.6
7.3
0.2
2.9
FBGA
780
10.9
8.4
6.9
5.8
0.2
2.9
FBGA
1152
9.9
7.5
6.1
5.0
0.2
2.5
FBGA
484
12.7
10.2
8.6
7.3
0.2
2.9
FBGA
780
10.9
8.4
6.9
5.8
0.2
2.8
FBGA
1152
9.9
7.5
6.1
5.0
0.2
2.5
FBGA
1152
9.6
7.3
5.9
4.9
0.1
2.3
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Thermal Resistance
25
Stratix Series Devices Thermal Resistance
Table 27 to Table 28 provide thermal resistance values for Stratix series devices.
Stratix II Devices
Table 27 lists the thermal resistance of Stratix II devices.
Table 27. Thermal Resistance of Stratix II Devices (Part 1 of 2)
Device
EP2S15
EP2S30
EP2S60
EP2S90
EP2S130
EP2S180
EP2SGX30
EP2SGX60
© December 2011
Package
Pin
Count
JC
(° C/W)
JA (° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA (° C/W)
400 ft./min.
JB
(° C/W)
FBGA, Flip
Chip
484
0.4
13.1
11.1
9.6
8.3
4.2
FBGA, Flip
Chip
672
0.4
12.2
10.2
8.8
7.6
4.1
FBGA, Flip
Chip
484
0.2
12.6
10.6
9.1
7.9
3.7
FBGA, Flip
Chip
672
0.2
11.7
9.7
8.3
7.1
3.4
FBGA, Flip
Chip
484
0.1
12.3
10.3
8.8
7.5
3.4
FBGA, Flip
Chip
672
0.1
11.4
9.4
7.8
6.7
3.0
FBGA, Flip
Chip
1020
0.1
10.4
8.4
7.0
5.9
2.7
HBGA, Flip
Chip
484
0.1
12.0
9.9
8.3
7.1
3.7
FBGA, Flip
Chip
780
0.1
10.8
8.8
7.3
6.1
2.6
FBGA, Flip
Chip
1020
0.1
10.2
8.2
6.8
5.7
2.4
FBGA, Flip
Chip
1508
0.1
9.3
7.4
6.1
5.0
2.2
FBGA, Flip
Chip
780
0.1
10.1
8.7
7.2
6.0
2.4
FBGA, Flip
Chip
1020
0.1
9.5
8.1
6.7
5.5
2.2
FBGA, Flip
Chip
1508
0.1
8.6
7.3
6.0
4.8
2.1
FBGA, Flip
Chip
1020
0.1
9.0
7.9
6.5
5.4
2.1
FBGA, Flip
Chip
1508
0.1
8.1
7.1
5.8
4.7
1.9
FBGA,
Flip Chip
780
0.2
11.1
8.6
7.2
6.0
3.1
FBGA,
Flip Chip
780
0.2
10.9
8.4
6.9
5.8
2.8
FBGA,
Flip Chip
1152
0.2
9.9
7.5
6.1
5.0
2.5
Altera Corporation
Package Information Datasheet for Mature Altera Devices
26
Package Information Datasheet for Mature Altera Devices
Thermal Resistance
Table 27. Thermal Resistance of Stratix II Devices (Part 2 of 2)
Device
EP2SGX90
EP2SGX130
Package
Pin
Count
JC
(° C/W)
JA (° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA (° C/W)
400 ft./min.
JB
(° C/W)
FBGA,
Flip Chip
1152
0.1
9.6
7.3
5.9
4.9
2.3
FBGA,
Flip Chip
1508
0.1
9.0
6.7
5.4
4.4
1.9
FBGA,
Flip Chip
1508
0.1
8.3
6.6
5.3
4.3
1.8
Stratix Devices
Table 28 lists the thermal resistance of Stratix devices.
Table 28. Thermal Resistance of Stratix Devices (Part 1 of 2)
Device
Package
Pin
Count
JC (° C/W)
JA (° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA (° C/W)
400 ft./min.
EP1SGX10C
EP1SGX10D
FBGA,
Flip Chip
672
0.4
11.1
9.1
7.7
6.5
EP1SGX25C
EP1SGX25D
FBGA,
Flip Chip
672
0.2
10.8
8.8
7.4
6.2
EP1SGX25D
EP1SGX25F
FBGA,
Flip Chip
1020
0.2
9.9
7.9
6.5
5.4
EP1SGX40D
EP1SGX40G
FBGA,
Flip Chip
1020
0.2
9.8
7.7
6.4
5.3
FBGA,
Flip Chip
484
0.4
11.9
9.8
8.4
7.2
BGA
672
3.2
16.8
13.7
11.9
10.5
FBGA
672
3.4
17.2
14.0
12.2
10.8
FBGA,
Flip Chip
780
0.4
10.9
8.8
7.4
6.3
FBGA,
Flip Chip
484
0.3
11.8
9.7
8.3
7.1
BGA
672
2.5
15.5
12.4
10.7
9.3
FBGA
672
2.7
16.0
12.8
11.0
9.6
FBGA,
Flip Chip
780
0.3
10.7
8.6
7.2
6.1
BGA
672
2.2
14.8
11.7
10.0
8.7
FBGA
672
2.3
15.3
12
10.4
9.0
FBGA,
Flip Chip
780
0.3
10.5
8.5
7.1
6.0
FBGA,
Flip Chip
1020
0.3
10.0
8.0
6.6
5.5
EP1S10
EP1S20
EP1S25
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Thermal Resistance
27
Table 28. Thermal Resistance of Stratix Devices (Part 2 of 2)
Device
EP1S30
EP1S40
EP1S60
EP1S80
Package
Pin Count
JC (° C/W)
JA (° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA (° C/W)
400 ft./min.
FBGA,
Flip Chip
780
0.2
10.4
8.4
7.0
5.9
BGA,
Flip Chip
956
0.2
9.1
7.1
5.8
4.8
FBGA,
Flip Chip
1020
0.2
9.9
7.9
6.5
5.4
FBGA,
Flip Chip
780
0.2
10.4
8.3
6.9
5.8
BGA,
Flip Chip
956
0.2
9.0
7.0
5.7
4.7
FBGA,
Flip Chip
1020
0.2
9.8
7.8
6.4
5.3
FBGA,
Flip Chip
1508
0.2
9.1
7.1
5.8
4.7
BGA,
Flip Chip
956
0.1
8.9
6.9
5.6
4.6
FBGA,
Flip Chip
1020
0.1
9.7
7.7
6.3
5.2
FBGA,
Flip Chip
1508
0.1
8.9
7.0
5.6
4.6
BGA,
Flip Chip
956
0.1
8.8
6.8
5.5
4.5
FBGA,
Flip Chip
1020
0.1
9.6
7.6
6.2
5.1
FBGA,
Flip Chip
1508
0.1
8.8
6.9
5.5
4.5
Cyclone Series Devices Thermal Resistance
Table 29 to Table 30 provide thermal resistance values for Cyclone series devices.
Cyclone II Devices
Table 29 lists the thermal resistance of Cyclone II devices.
Table 29. Thermal Resistance of Cyclone II Devices (Part 1 of 2)
Device
EP2C5
© December 2011
Package
Pin Count
JC (° C/W)
JA (° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA (° C/W)
400 ft./min.
TQFP,
Wire Bond
144
10.0
31.0
29.3
27.9
25.5
PQFP,
Wire Bond
208
5.5
30.4
29.2
27.3
22.3
FBGA,
Wire Bond
256
8.7
30.2
26.1
23.6
21.7
Altera Corporation
Package Information Datasheet for Mature Altera Devices
28
Package Information Datasheet for Mature Altera Devices
Thermal Resistance
Table 29. Thermal Resistance of Cyclone II Devices (Part 2 of 2)
Device
EP2C8
EP2C15
EP2C20
EP2C35
EP2C50
EP2C70
Package
Pin Count
JC (° C/W)
JA (° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA (° C/W)
400 ft./min.
TQFP,
Wire Bond
144
9.9
29.8
28.3
26.9
24.9
PQFP,
Wire Bond
208
5.4
30.2
28.8
26.9
21.7
FBGA,
Wire Bond
256
7.1
27.0
23.0
20.5
18.5
FBGA,
Wire Bond
256
5.5
24.2
20.0
17.8
16.0
FBGA,
Wire Bond
484
4.2
21.0
17.0
14.8
13.1
PQFP,
Wire Bond
240
4.2
26.6
24.0
21.4
17.4
FBGA,
Wire Bond
256
5.5
24.2
20.0
17.8
16.0
FBGA,
Wire Bond
484
4.2
21.0
17.0
14.8
13.1
FBGA,
Wire Bond
484
3.3
19.4
15.4
13.3
11.7
UBGA,
Wire Bond
484
5.0
20.6
16.6
14.5
12.8
FBGA,
Wire Bond
672
3.1
18.6
14.6
12.6
11.1
FBGA,
Wire Bond
484
2.8
18.4
14.4
12.4
10.9
UBGA,
Wire Bond
484
4.4
19.6
15.6
13.6
11.9
FBGA,
Wire Bond
672
2.6
17.7
13.7
11.8
10.2
FBGA,
Wire Bond
672
2.2
16.9
13.0
11.1
9.7
FBGA,
Wire Bond
896
2.1
16.3
11.9
10.5
9.1
Cyclone Devices
Table 30 lists the thermal resistance of Cyclone devices.
Table 30. Thermal Resistance of Cyclone Devices (Part 1 of 2)
Device
EP1C3
EP1C6
Package
Pin Count
JC (° C/W)
JA (° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA (° C/W)
400 ft./min.
TQFP
100
11.0
37.5
35.4
33.4
29.8
TQFP
144
10.0
31.1
29.4
27.9
25.5
TQFP
144
9.8
29.4
28.0
26.7
24.7
PQFP
240
4.3
27.2
24.7
22.1
17.8
FBGA
256
8.8
28.7
24.5
22.3
20.5
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Thermal Resistance
29
Table 30. Thermal Resistance of Cyclone Devices (Part 2 of 2)
Device
Package
Pin Count
JC (° C/W)
JA (° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA (° C/W)
400 ft./min.
PQFP
240
4.0
26.0
23.4
20.8
17.1
FBGA
256
6.6
24.3
20.2
18.1
16.4
FBGA
324
6.1
23.0
19.8
17.7
16.1
FBGA
324
5.0
21.0
17.7
15.6
14.1
FBGA
400
4.7
20.7
17.5
15.5
13.9
EP1C12
EP1C20
MAX Series Devices Thermal Resistance
Table 31 through Table 33 provide thermal resistance values for MAX series devices.
MAX 9000 Devices
Table 31 lists the thermal resistance of MAX 9000 devices.
Table 31. Thermal Resistance of MAX 9000 Devices
Device
EPM9320
EPM9320A
EPM9400
EPM9480
EPM9560
EPM9560A
© December 2011
Package
Pin
Count
JC (° C/W)
JA (° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA (° C/W)
400 ft./min.
PLCC
84
9.0
29.0
27.0
25.0
23.0
RQFP
208
1.0
17.0
16.0
15.0
13.0
PGA
280
2.0
14.0
10.0
7.0
5.0
BGA
356
2.0
14.0
12.0
11.0
10.0
PLCC
84
9.0
29.0
27.0
26.0
23.0
RQFP
208
2.0
17.0
16.0
15.0
13.0
BGA
356
1.0
12.0
11.0
10.0
9.0
PLCC
84
9.0
29.0
27.0
25.0
23.0
RQFP
208
1.0
17.0
16.0
15.0
13.0
RQFP
240
1.0
14.0
12.0
11.0
10.0
RQFP
208
1.0
17.0
16.0
15.0
12.0
RQFP
240
1.0
12.0
11.0
10.0
9.0
RQFP
208
1.0
17.0
16.0
15.0
12.0
RQFP
240
1.0
12.0
11.0
10.0
9.0
BGA
356
1.0
12.0
11.0
10.0
9.0
RQFP
208
1.0
17.0
16.0
15.0
12.0
RQFP
240
1.0
11.0
10.0
9.0
8.0
BGA
356
1.0
12.0
11.0
10.0
9.0
Altera Corporation
Package Information Datasheet for Mature Altera Devices
30
Package Information Datasheet for Mature Altera Devices
Thermal Resistance
MAX 7000 Devices
Table 32 lists the thermal resistance of MAX 7000 devices.
Table 32. Thermal Resistance of MAX 7000 Devices (Part 1 of 3)
Device
Package
Pin
Count
PLCC
EPM7032
PQFP
44
TQFP
PLCC
EPM7032B
TQFP
UBGA
EPM7032S
EPM7032V
EPM7032AE
PLCC
TQFP
PLCC
TQFP
PLCC
TQFP
PLCC
EPM7064S
TQFP
EPM7064B
44
44
JA (° C/W)
400 ft./min.
10.0
33.0
31.0
30.0
27.0
15.0
48.0
46.0
45.0
42.0
14.0
46.0
44.0
43.0
40.0
10.0
33.0
31.0
30.0
27.0
14.0
46.0
44.0
43.0
40.0
23.0
69.0
67.0
66.0
62.0
10.0
33.0
31.0
30.0
27.0
14.0
46.0
44.0
43.0
40.0
9.0
31.0
30.0
28.0
25.0
14.0
45.0
44.0
42.0
39.0
9.0
31.0
30.0
28.0
25.0
14.0
46.0
45.0
43.0
40.0
9.0
31.0
30.0
28.0
25.0
14.0
46.0
44.0
43.0
40.0
28.0
26.0
25.0
23.0
TQFP
100
11.0
39.0
37.0
35.0
32.0
TQFP
44
9.0
31.0
30.0
28.0
25.0
13.0
44.0
43.0
41.0
38.0
PLCC
84
9.0
28.0
26.0
25.0
22.0
PQFP
100
6.0
33.0
32.0
31.0
30.0
9.0
31.0
30.0
28.0
25.0
14.0
46.0
45.0
43.0
40.0
23.0
56.0
53.0
51.0
47.0
12.0
39.0
37.0
35.0
31.0
TQFP
UBGA
TQFP
44
49
100
21.0
49.0
47.0
44.0
40.0
PLCC
68
9.0
29.0
27.0
26.0
23.0
PLCC
84
9.0
28.0
26.0
24.0
22.0
PLCC
84
9.0
28.0
26.0
25.0
22.0
11.0
37.0
35.0
33.0
30.0
18.0
44.0
42.0
39.0
35.0
TQFP
EPM7128A
44
JA (° C/W)
200 ft./min.
9.0
FBGA
EPM7096
44
JA (° C/W)
100 ft./min.
84
PLCC
EPM7064AE
49
JA (° C/W)
Still Air
PLCC
PLCC
EPM7064
44
JC (° C/W)
FBGA
100
TQFP
144
9.0
31.0
29.0
28.0
25.0
FBGA
256
12.0
38.0
36.0
34.0
31.0
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Thermal Resistance
31
Table 32. Thermal Resistance of MAX 7000 Devices (Part 2 of 3)
Device
Package
Pin
Count
JC (° C/W)
JA (° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA (° C/W)
400 ft./min.
UBGA
49
22.0
53.0
50.0
48.0
44.0
11.0
38.0
36.0
34.0
31.0
19.0
46.0
44.0
41.0
37.0
TQFP
EPM7128B
EPM7128E
EPM7128S
FBGA
TQFP
144
9.0
32.0
30.0
29.0
26.0
UBGA
169
16.0
44.0
42.0
39.0
35.0
FBGA
256
13.0
40.0
38.0
36.0
33.0
PLCC
84
10.0
29.0
28.0
26.0
23.0
PQFP
100
6.0
32.0
31.0
30.0
29.0
PQFP
160
6.0
32.0
31.0
30.0
28.0
PLCC
84
10.0
30.0
28.0
26.0
23.0
12.0
38.0
36.0
34.0
30.0
10.0
35.0
34.0
33.0
32.0
7.0
33.0
32.0
31.0
30.0
TQFP
PQFP
EPM7160E
EPM7160S
EPM7192S
EPM7192E
EPM7256A
EPM7256B
© December 2011
100
PQFP
160
PLCC
84
TQFP
EPM7128AE
100
FBGA
100
11.0
30.0
28.0
26.0
23.0
12.0
38.0
36.0
34.0
30.0
14.0
43.0
40.0
38.0
37.0
TQFP
144
11.0
33.0
30.0
28.0
26.0
UBGA
169
14.0
42.0
40.0
38.0
36.0
FBGA
256
12.0
39.0
37.0
35.0
31.0
PLCC
84
10.0
29.0
28.0
26.0
23.0
PQFP
100
6.0
32.0
31.0
30.0
29.0
PQFP
160
6.0
33.0
32.0
31.0
30.0
PLCC
84
10.0
35.0
28.0
26.0
23.0
TQFP
100
12.0
37.0
35.0
33.0
30.0
PQFP
160
6.0
33.0
32.0
31.0
30.0
PQFP
160
6.0
32.0
31.0
30.0
29.0
6.0
20.0
13.0
10.0
8.0
6.0
32.0
31.0
30.0
26.0
PGA
PQFP
160
TQFP
100
9.0
36.0
34.0
32.0
30.0
TQFP
144
8.0
32.0
27.0
25.0
24.0
PQFP
208
5.0
30.0
28.0
26.0
21.0
FBGA
256
12.0
34.0
32.0
29.0
28.0
TQFP
100
12.0
37.0
35.0
33.0
30.0
TQFP
144
9.0
33.0
29.0
27.0
25.0
UBGA
169
13.0
40.0
38.0
36.0
34.0
PQFP
208
5.0
31.0
29.0
27.0
22.0
FBGA
256
9.0
34.0
32.0
30.0
28.0
Altera Corporation
Package Information Datasheet for Mature Altera Devices
32
Package Information Datasheet for Mature Altera Devices
Thermal Resistance
Table 32. Thermal Resistance of MAX 7000 Devices (Part 3 of 3)
Device
EPM7256E
EPM7256S
EPM7256AE
EPM7512AE
Package
Pin
Count
JC (° C/W)
JA (° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA (° C/W)
400 ft./min.
PGA
192
6.0
20.0
13.0
10.0
8.0
PQFP
160
6.0
31.0
30.0
29.0
25.0
RQFP
208
1.0
17.0
16.0
15.0
13.0
5.0
30.0
29.0
26.0
21.0
1.0
18.0
17.0
16.0
15.0
PQFP
RQFP
FBGA
100
13.0
42.0
39.0
37.0
36.0
TQFP
100
12.0
37.0
35.0
33.0
30.0
TQFP
144
9.0
33.0
29.0
27.0
25.0
PQFP
208
5.0
31.0
29.0
27.0
22.0
FBGA
256
9.0
34.0
32.0
30.0
28.0
TQFP
144
10.0
32.0
27.0
25.0
23.0
PQFP
208
5.0
30.0
28.0
25.0
21.0
1.2
14.0
12.0
11.0
10.0
BGA
FBGA
EPM7512B
208
256
11.0
32.0
30.0
28.0
22.0
TQFP
144
10.0
32.0
27.0
25.0
24.0
UBGA
169
12.0
35.0
33.0
31.0
30.0
PQFP
208
5.0
30.0
28.0
25.0
21.0
BGA
256
1.2
14.0
12.0
11.0
10.0
FBGA
256
11.0
32.0
30.0
28.0
27.0
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Thermal Resistance
33
MAX 3000A Devices
Table 33 lists the thermal resistance of MAX 3000A devices.
Table 33. Thermal Resistance of MAX 3000A Devices
Device
EPM3032A
Package
TQFP
PLCC
TQFP
EPM3064A
EPM3128A
EPM3256A
EPM3512A
PLCC
Pin
Count
44
44
JC (° C/W)
JA (° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA (° C/W)
400 ft./min.
14.0
46.0
45.0
43.0
40.0
9.0
31.0
30.0
28.0
25.0
14.0
46.0
45.0
43.0
40.0
9.0
31.0
30.0
28.0
25.0
TQFP
100
12.0
39.0
37.0
35.0
31.0
TQFP
100
12.0
38.0
36.0
34.0
30.0
TQFP
144
9.0
33.0
29.0
27.0
25.0
PQFP
208
5.0
31.0
29.0
27.0
22.0
PQFP
208
5.0
30.0
28.0
25.0
21.0
FBGA
256
11.0
32.0
30.0
28.0
22.0
HardCopy Series Devices Thermal Resistance
Table 34 to Table 35 provide thermal resistance values for HardCopy series devices.
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
34
Package Information Datasheet for Mature Altera Devices
Thermal Resistance
HardCopy II Devices
Table 34 lists the thermal resistance of HardCopy II devices.
Table 34. Thermal Resistance of HardCopy II Devices
JA (° C/W) JA (° C/W)
100 ft./min. 200 ft./min.
JA (° C/W)
400 ft./min.
JB (° C/W)
15.3
13.8
9.6
9.9
8.3
7.1
3.6
11.7
9.5
8.0
6.8
3.5
0.3
10.8
8.6
7.1
6.0
2.9
1020
0.2
10.6
8.4
6.9
5.8
2.7
1508
0.2
9.7
7.5
6.1
5.0
2.6
Device
Package
Pin Count
JC (° C/W)
JA (° C/W)
Still Air
HC210
FBGA,
Wire Bond
484
5.5
21.3
17.4
FBGA,
Flip Chip
672
0.5
12.1
FBGA,
Flip Chip
780
0.5
FBGA,
Flip Chip
1020
FBGA,
Flip Chip
FBGA,
Flip Chip
HC220
HC230
HC240
HardCopy Devices
Table 35 lists the thermal resistance of HardCopy devices.
Table 35. Thermal Resistance of HardCopy Devices
Device
Package
Pin
Count
JC (° C/W)
JA (° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA (° C/W)
400 ft./min.
HC20K400
BGA, Flip Chip
652
0.5
9.1
7.9
6.4
5.3
HC20K600
FBGA, Flip Chip
672
1.0
13.0
10.2
8.6
7.3
3.7
19.7
15.8
13.9
12.4
3.4
19.3
15.6
13.8
12.3
HC1S25
FBGA, Wire Bond
BGA, Wire Bond
672
HC1S30
FBGA, Flip Chip
780
0.4
10.9
8.8
7.4
6.3
HC1S40
FBGA, Flip Chip
780
0.4
10.9
8.8
7.4
6.3
HC1S60
FBGA, Flip Chip
1020
0.3
10.3
8.54
7.0
5.8
HC1S80
FBGA, Flip Chip
1020
0.3
10.3
8.54
7.0
5.8
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Thermal Resistance
35
APEX Series Devices Thermal Resistance
Table 36 to Table 37 list thermal resistance values for APEX series devices.
APEX II Devices
Table 36 lists the thermal resistance of APEX II devices.
Table 36. Thermal Resistance of APEX II Devices
Device
Package
FBGA, Flip Chip (Cu lid)
EP2A15
FBGA, Flip Chip (AlSiC lid)
BGA, Flip Chip (Cu lid)
BGA, Flip Chip (AlSiC lid)
FBGA (Cu lid)
FBGA, Flip Chip (AlSiC lid)
EP2A25
BGA, Flip Chip (Cu lid)
BGA, Flip Chip (AlSiC lid)
FBGA, Flip Chip (Cu lid)
FBGA, Flip Chip (AlSiC lid)
FBGA, Flip Chip (Cu lid)
FBGA, Flip Chip (AlSiC lid)
EP2A40
BGA, Flip Chip (Cu lid)
BGA, Flip Chip (AlSiC lid)
FBGA, Flip Chip (Cu lid)
FBGA, Flip Chip (AlSiC lid)
BGA, Flip Chip (Cu lid)
EP2A70
BGA, Flip Chip (AlSiC lid)
FBGA, Flip Chip (Cu lid)
FBGA, Flip Chip (AlSiC lid)
© December 2011
Altera Corporation
Pin
Count
672
724
672
724
1020
672
724
1020
724
1508
JC (° C/W)
JA (° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA (° C/W)
400 ft./min.
0.2
10.8
8.8
7.4
6.2
0.3
11.6
9.6
8.0
6.6
0.2
9.7
7.7
6.4
5.3
0.4
10.0
8.2
6.6
5.4
0.2
10.7
8.7
7.2
6.1
0.3
11.5
9.6
8.0
6.6
0.2
9.6
7.6
6.2
5.2
0.3
10.0
8.2
6.6
5.4
0.2
9.8
7.8
6.4
5.3
0.3
10.4
8.5
6.9
5.7
0.2
10.0
8.2
6.9
5.9
0.2
10.0
8.2
6.9
5.9
0.2
9.5
7.5
6.1
5.1
0.2
9.5
7.5
6.1
5.1
0.2
9.7
7.7
6.3
5.2
0.2
9.7
7.7
6.3
5.2
0.1
9.3
7.3
6.0
4.9
0.1
10.0
7.9
6.4
5.3
0.1
8.8
6.8
5.5
4.5
0.1
9.3
7.3
5.8
4.7
Package Information Datasheet for Mature Altera Devices
36
Package Information Datasheet for Mature Altera Devices
Thermal Resistance
APEX 20K Devices
Table 37 lists the thermal resistance of APEX 20KE, 20KC, and 20K devices.
Table 37. Thermal Resistance of APEX 20KE, 20KC, and 20K Devices (Part 1 of 3)
Device
EP20K30E
EP20K60E
EP20K100
EP20K100E
EP20K160E
EP20K200
EP20K200E
Package
Pin
Count
JC (° C/W)
JA (° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA (° C/W)
400 ft./min.
TQFP
144
8.0
29.0
28.0
26.0
25.0
PQFP
208
5.0
30.0
29.0
27.0
22.0
FBGA
144
14.0
36.0
34.0
32.0
29.0
FBGA
324
9.0
31.0
29.0
28.0
25.0
TQFP
144
7.0
28.0
26.0
25.0
24.0
FBGA
144
11.0
33.0
32.0
30.0
27.0
PQFP
208
5.0
30.0
28.0
26.0
21.0
PQFP
240
4.0
26.0
24.0
21.0
17.0
FBGA
324
7.0
29.0
28.0
26.0
24.0
BGA
356
1.0
12.0
11.0
10.0
9.0
TQFP
144
7.0
26.0
25.0
24.0
23.0
PQFP
208
5.0
29.0
27.0
25.0
20.0
PQFP
240
4.0
25.0
23.0
20.0
17.0
FBGA
324
6.0
28.0
26.0
25.0
23.0
BGA
356
1.0
12.0
11.0
10.0
9.0
TQFP
144
7.0
26.0
25.0
24.0
23.0
FBGA
144
9.0
32.0
30.0
29.0
26.0
PQFP
208
5.0
29.0
27.0
25.0
20.0
PQFP
240
4.0
25.0
23.0
20.0
17.0
FBGA
324
6.0
28.0
26.0
25.0
23.0
BGA
356
1.0
12.0
11.0
10.0
9.0
TQFP
144
6.0
25.0
24.0
23.0
22.0
PQFP
208
5.0
28.0
26.0
23.0
19.0
PQFP
240
4.0
24.0
21.0
19.0
16.0
BGA
356
1.0
12.0
11.0
10.0
9.0
FBGA
484
5.0
24.0
23.0
22.0
21.0
PQFP
208
4.0
25.0
23.0
20.0
17.0
PQFP
240
3.0
21.0
19.0
17.0
15.0
BGA
356
1.0
12.0
11.0
10.0
9.0
FBGA
484
5.0
22.0
21.0
20.0
19.0
PQFP
208
4.0
25.0
23.0
20.0
17.0
PQFP
240
3.0
22.0
19.0
18.0
16.0
BGA
356
2.0
12.0
11.0
10.0
9.0
FBGA
484
5.0
23.0
22.0
21.0
20.0
BGA
652
1.0
12.0
11.0
10.0
9.0
FBGA
672
5.0
21.0
20.0
19.0
18.0
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Thermal Resistance
37
Table 37. Thermal Resistance of APEX 20KE, 20KC, and 20K Devices (Part 2 of 3)
Device
EP20K200C
EP20K300E
EP20K400
Package
Pin
Count
JC (° C/W)
JA (° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA (° C/W)
400 ft./min.
PQFP
208
4.0
25.0
23.0
20.0
17.0
PQFP
240
3.0
22.0
19.0
18.0
16.0
BGA
356
2.0
12.0
11.0
10.0
9.0
FBGA
484
5.0
23.0
22.0
21.0
20.0
PQFP
240
3.0
19.0
18.0
16.0
15.0
BGA
652
1.0
12.0
11.0
10.0
9.0
FBGA
672
5.0
20.0
19.0
18.0
17.0
BGA
652
0.5
9.0
8.0
7.0
6.0
PGA
655
1.0
8.0
7.0
6.0
4.0
FBGA
672
0.4
11.6
9.6
7.9
6.5
FBGA w/ fin (1)
672
0.5
7.0
4.0
3.0
2.6
BGA
652
0.5
9.0
8.0
7.0
6.0
0.3
10.9
8.8
7.4
6.3
EP20K400E
FBGA (Cu lid)
EP20K400C
FBGA (AlSiC lid)
0.4
11.7
9.7
8.0
6.7
FBGA w/ fin (1)
672
0.5
7.0
4.0
3.0
2.6
BGA
652
0.5
9.0
8.0
7.0
6.0
0.2
10.8
8.7
7.3
6.1
0.3
11.6
9.6
7.9
6.5
0.5
5.0
3.0
3.0
2.0
0.2
9.9
7.8
6.5
5.4
0.3
10.4
8.4
6.8
5.6
FBGA (Cu lid)
EP20K600E
EP20K600C
FBGA (AlSiC lid)
FBGA w/ fin (1)
FBGA (Cu lid)
FBGA (AlSiC lid)
FBGA w/ fin (1)
BGA (Cu lid)
BGA (AlSiC lid)
FBGA w/ fin (1)
EP20K1000E
EP20K1000C
FBGA (Cu lid)
FBGA (AlSiC lid)
FBGA w/ fin (1)
FBGA (Cu lid)
FBGA (AlSiC lid)
FBGA w/ fin (1)
© December 2011
672
Altera Corporation
672
672
1,020
1,020
652
652
672
672
1,020
1,020
0.5
5.0
3.0
3.0
2.0
0.1
8.3
7.0
5.6
4.5
0.2
9.3
7.4
6.0
4.9
0.5
4.0
3.0
3.0
2.0
0.1
10.6
8.6
7.2
6.0
0.2
11.4
9.4
7.7
6.3
0.5
6.0
4.0
3.0
2.0
0.1
9.7
7.7
6.3
5.2
0.2
10.2
8.2
6.6
5.4
0.5
5.0
3.0
2.0
2.0
Package Information Datasheet for Mature Altera Devices
38
Package Information Datasheet for Mature Altera Devices
Thermal Resistance
Table 37. Thermal Resistance of APEX 20KE, 20KC, and 20K Devices (Part 3 of 3)
Device
Package
BGA (Cu lid)
BGA (AlSiC lid)
EP20K1500E
Pin
Count
JC (° C/W)
JA (° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA (° C/W)
400 ft./min.
0.1
8.2
6.9
5.5
4.4
0.2
9.2
7.3
5.8
4.8
652
FBGA
652
0.1
9.2
7.3
5.8
4.8
FBGA w/ fin (1)
652
0.5
4.0
3.0
2.5
2.0
0.1
9.6
7.6
6.2
5.1
0.2
10.1
8.1
6.4
5.3
0.5
5.0
3.0
2.5
2.0
FBGA (Cu lid)
FBGA (AlSiC lid)
FBGA w/ fin (1)
1,020
1,020
Note to Table 37:
(1) “fin” is an extra heat sink that customers can add to the device. Several vendors make heat sinks, and they all have different sizes. Altera
performed the thermal calculations in Table 37 using the following fin specifications: width: 0.25 mm; height: 7.0 mm; pitch: 1.5 mm; base
thickness: 0.5 mm.
ACEX 1K Devices Thermal Resistance
Table 38 provides thermal resistance values for ACEX 1K devices.
Table 38. Thermal Resistance of ACEX 1K Devices
Device
EP1K10
EP1K30
EP1K50
EP1K100
Package
Pin
Count
JC (° C/W)
JA (° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA (° C/W)
400 ft./min.
TQFP
100
11.0
37.0
35.0
33.0
29.0
TQFP
144
8.0
31.0
29.0
28.0
25.0
PQFP
208
6.0
30.0
29.0
27.0
22.0
FBGA
256
12.0
37.0
35.0
33.0
30.0
TQFP
144
8.0
28.0
27.0
26.0
24.0
PQFP
208
5.0
30.0
28.0
26.0
21.0
FBGA
256
9.0
31.0
29.0
28.0
25.0
TQFP
144
7.0
26.0
25.0
24.0
23.0
PQFP
208
5.0
29.0
28.0
25.0
20.0
FBGA
256
7.0
30.0
28.0
27.0
24.0
FBGA
484
5.0
25.0
24.0
23.0
22.0
PQFP
208
5.0
28.0
26.0
23.0
18.0
FBGA
256
6.0
28.0
26.0
25.0
23.0
FBGA
484
5.0
24.0
23.0
22.0
21.0
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Thermal Resistance
39
Mercury Devices Thermal Resistance
Table 39 provides thermal resistance values for Mercury devices.
Table 39. Thermal Resistance of Mercury Devices
Device
EP1M120
EP1M350
Package
Pin
Count
JC (° C/W)
JA (° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA (° C/W)
400 ft./min.
FBGA (Cu lid)
484
0.6
12.2
10.1
8.7
7.5
FBGA (AlSiC lid)
484
0.9
13.0
11.1
9.3
7.9
FBGA (Cu lid)
780
0.2
10.5
8.5
7.1
5.9
FBGA (AlSiC lid)
780
0.3
11.0
9.2
7.6
6.3
FLEX Series Devices Thermal Resistance
Table 40 through Table 42 provide thermal resistance values for FLEX series devices.
FLEX 10K Devices
Table 40 lists the thermal resistance of FLEX 10K devices.
Table 40. Thermal Resistance of FLEX 10K Devices (Part 1 of 3)
Device
EPF10K10
EPF10K10A
EPF10K20
EPF10K30
EPF10K30A
EPF10K30E
© December 2011
Package
Pin
Count
JC (° C/W)
JA (° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA (° C/W)
400 ft./min.
PLCC
84
9.0
28.0
26.0
24.0
22.0
TQFP
144
7.0
26.0
25.0
24.0
23.0
PQFP
208
5.0
29.0
27.0
25.0
20.0
TQFP
100
10.0
35.0
33.0
31.0
28.0
TQFP
144
7.0
29.0
28.0
26.0
25.0
PQFP
208
5.0
30.0
29.0
27.0
21.0
FBGA
256
7.0
33.0
30.0
28.0
26.0
TQFP
144
6.0
24.0
23.0
22.0
21.0
RQFP
208
1.0
17.0
16.0
15.0
13.0
RQFP
240
1.0
14.0
12.0
11.0
10.0
RQFP
208
1.0
17.0
16.0
15.0
12.0
RQFP
240
1.0
13.0
12.0
11.0
10.0
BGA
356
1.0
12.0
11.0
10.0
9.0
TQFP
144
7.0
25.0
24.0
23.0
22.0
PQFP
208
5.0
29.0
27.0
24.0
19.0
PQFP
240
4.0
25.0
22.0
20.0
17.0
FBGA
256
6.0
28.0
26.0
24.0
23.0
BGA
356
1.0
12.0
11.0
10.0
9.0
FBGA
484
5.0
24.0
22.0
21.0
20.0
TQFP
144
9.0
28.0
27.0
26.0
24.0
PQFP
208
5.0
30.0
28.0
26.0
21.0
FBGA
256
9.0
31.0
29.0
28.0
25.0
FBGA
484
6.0
26.0
25.0
24.0
22.0
Altera Corporation
Package Information Datasheet for Mature Altera Devices
40
Package Information Datasheet for Mature Altera Devices
Thermal Resistance
Table 40. Thermal Resistance of FLEX 10K Devices (Part 2 of 3)
Device
EPF10K40
EPF10K50
Package
Pin
Count
JC (° C/W)
JA (° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA (° C/W)
400 ft./min.
RQFP
208
1.0
17.0
16.0
15.0
12.0
RQFP
240
1.0
13.0
12.0
11.0
10.0
RQFP
240
1.0
12.0
11.0
10.0
9.0
BGA
356
1.0
12.0
11.0
10.0
9.0
3.0
12.0
10.0
9.0
8.0
PGA
PGA (1)
EPF10K50V
EPF10K50E
EPF10K50S
EPF10K70
403
3.0
10.0
8.0
7.0
6.0
PQFP
240
4.0
25.0
22.0
20.0
17.0
RQFP
240
1.0
13.0
12.0
11.0
10.0
BGA
356
1.0
12.0
11.0
10.0
9.0
FBGA
484
5.0
23.0
22.0
21.0
20.0
TQFP
144
9.0
26.0
25.0
24.0
23.0
PQFP
208
5.0
29.0
27.0
24.0
19.0
PQFP
240
4.0
25.0
22.0
20.0
17.0
FBGA
256
6.0
29.0
27.0
26.0
24.0
FBGA
484
5.0
25.0
24.0
23.0
21.0
TQFP
144
9.0
26.0
25.0
24.0
23.0
PQFP
208
5.0
29.0
28.0
25.0
20.0
PQFP
240
4.0
26.0
23.0
20.0
17.0
FBGA
256
7.0
30.0
28.0
27.0
24.0
BGA
356
1.0
12.0
11.0
10.0
9.0
FBGA
484
5.0
25.0
24.0
23.0
22.0
RQFP
240
1.0
12.0
11.0
10.0
9.0
PGA
503
1.0
8.0
7.0
6.0
4.0
1.0
8.0
7.0
6.0
4.0
1.0
6.0
5.0
4.0
3.0
—
2.0
—
—
—
PGA
EPF10K100
PGA (1)
503
PGA (2)
EPF10K100A
EPF10K100E
EPF10K130V
RQFP
240
1.0
13.0
11.0
10.0
9.0
BGA
356
1.0
12.0
11.0
10.0
9.0
FBGA
484
5.0
22.0
21.0
20.0
18.0
BGA
600
0.5
10.0
9.0
8.0
7.0
PQFP
208
5.0
28.0
26.0
23.0
18.0
PQFP
240
4.0
23.0
21.0
19.0
16.0
FBGA
256
6.0
28.0
26.0
25.0
23.0
BGA
356
1.0
12.0
11.0
10.0
9.0
FBGA
484
5.0
24.0
23.0
22.0
21.0
PGA
599
1.0
8.0
7.0
6.0
4.0
BGA
600
0.5
10.0
9.0
8.0
7.0
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Thermal Resistance
41
Table 40. Thermal Resistance of FLEX 10K Devices (Part 3 of 3)
Device
EPF10K130E
EPF10K200E
EPF10K200S
EPF10K250A
Package
Pin
Count
JC (° C/W)
JA (° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA (° C/W)
400 ft./min.
PQFP
240
4.0
21.0
19.0
17.0
15.0
BGA
356
1.0
12.0
11.0
10.0
9.0
FBGA
484
5.0
23.0
22.0
21.0
20.0
BGA
600
0.5
10.0
9.0
8.0
7.0
FBGA
672
5.0
21.0
20.0
19.0
18.0
PGA
599
1.0
8.0
7.0
6.0
4.0
BGA
600
0.5
10.0
9.0
8.0
7.0
FBGA
672
5.0
20.0
19.0
18.0
17.0
RQFP
240
1.0
13.0
11.0
10.0
9.0
BGA
356
1.0
12.0
11.0
10.0
9.0
FBGA
484
5.0
22.0
21.0
20.0
19.0
BGA
600
0.5
10.0
9.0
8.0
7.0
FBGA
672
5.0
21.0
20.0
19.0
18.0
PGA
599
1.0
8.0
7.0
6.0
4.0
BGA
600
0.5
10.0
9.0
8.0
7.0
Notes to Table 40:
(1) With attached pin-fin heat sink.
(2) With attached motor-driven fan heat sink.
FLEX 8000 Devices
Table 41 lists the thermal resistance of FLEX 8000 devices.
Table 41. Thermal Resistance of FLEX 8000 Devices (Part 1 of 2)
Device
EPF8282A
EPF8452A
EPF8636A
© December 2011
Package
Pin
Count
JC (° C/W)
JA (° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA (° C/W)
400 ft./min.
PLCC
84
10.0
30.0
28.0
26.0
23.0
TQFP
100
11.0
36.0
34.0
32.0
29.0
PLCC
84
10.0
30.0
28.0
26.0
23.0
TQFP
100
11.0
35.0
33.0
31.0
28.0
PQFP
160
6.0
32.0
31.0
30.0
28.0
PLCC
84
10.0
29.0
28.0
26.0
23.0
PQFP
160
6.0
32.0
31.0
30.0
27.0
PGA
192
6.0
16.0
11.0
8.0
6.0
PQFP
208
5.0
30.0
38.0
26.0
20.0
RQFP
208
1.0
17.0
16.0
15.0
14.0
Altera Corporation
Package Information Datasheet for Mature Altera Devices
42
Package Information Datasheet for Mature Altera Devices
Thermal Resistance
Table 41. Thermal Resistance of FLEX 8000 Devices (Part 2 of 2)
Device
EPF8820A
EPF81188A
EPF81500A
Package
Pin
Count
JC (° C/W)
JA (° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA (° C/W)
400 ft./min.
TQFP
144
9.0
26.0
25.0
24.0
23.0
PQFP
160
6.0
32.0
31.0
30.0
27.0
PQFP
208
5.0
29.0
27.0
25.0
20.0
RQFP
208
1.0
17.0
16.0
15.0
14.0
BGA
225
6.0
28.0
19.0
14.0
11.0
PQFP
208
5.0
28.0
26.0
24.0
19.0
PGA
232
2.0
14.0
10.0
7.0
5.0
PQFP
240
4.0
24.0
21.0
19.0
16.0
RQFP
240
1.0
14.0
12.0
11.0
10.0
PQFP
240
4.0
22.0
20.0
19.0
16.0
RQFP
240
1.0
13.0
12.0
11.0
10.0
PGA
280
2.0
14.0
10.0
7.0
5.0
FLEX 6000 Devices
Table 42 lists the thermal resistance of FLEX 6000 devices.
Table 42. Thermal Resistance of FLEX 6000 Devices
Device
EPF6010A
EPF6016
Package
Pin Count
JC (° C/W)
JA (° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA (° C/W)
400 ft./min.
TQFP
100
11.0
35.0
33.0
31.0
28.0
TQFP
144
10.0
28.0
26.0
25.0
24.0
TQFP
144
10.0
28.0
26.0
25.0
24.0
PQFP
208
5.0
30.0
28.0
26.0
21.0
PQFP
240
4.0
26.0
24.0
21.0
17.0
BGA
256
6.0
28.0
22.0
20.0
19.0
11.0
35.0
33.0
31.0
28.0
14.0
36.0
34.0
32.0
29.0
10.0
29.0
28.0
26.0
24.0
TQFP
FBGA
EPF6016A
EPF6024A
100
TQFP
144
PQFP
208
5.0
30.0
29.0
26.0
21.0
FBGA
256
10.0
32.0
30.0
29.0
26.0
TQFP
144
10.0
27.0
26.0
25.0
24.0
PQFP
208
5.0
29.0
28.0
26.0
20.0
PQFP
240
4.0
26.0
23.0
21.0
17.0
6.0
28.0
22.0
20.0
19.0
8.0
30.0
29.0
27.0
25.0
BGA
FBGA
256
Excalibur Devices Thermal Resistance
Table 43 provides thermal resistance values for Excalibur devices.
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Thermal Resistance
43
Table 43. Thermal Resistance of Excalibur Embedded Processor Solutions
Package
Pin
Count
JC (° C/W)
JA (° C/W)
Still Air
JA (° C/W)
100 ft./min.
JA (° C/W)
200 ft./min.
JA (° C/W)
400 ft./min.
FBGA
484
4.0
20.0
18.3
15.8
13.9
FBGA, Flip Chip (Cu lid)
672
0.5
11.3
9.3
7.9
6.7
FBGA, Flip Chip (AlSiC lid)
672
0.8
12.2
10.2
8.6
7.2
Device
EPXA1
EPXA4
EPXA10
FBGA, Flip Chip (Cu lid)
672
0.2
10.8
8.8
7.3
6.2
FBGA, Flip Chip (AlSiC lid)
672
0.3
11.6
9.6
7.9
6.6
FBGA, Flip Chip (Cu lid)
1,020
0.2
9.9
7.9
6.5
5.4
FBGA, Flip Chip (AlSiC lid)
1,020
0.3
10.4
8.5
6.9
5.7
FBGA, Flip Chip (Cu lid)
1,020
0.1
9.6
7.6
6.2
5.1
FBGA, Flip Chip (AlSiC lid)
1,020
0.2
10.0
8.0
6.4
5.7
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
44
Package Information Datasheet for Mature Altera Devices
Package Outlines
Package Outlines
The package outlines on the following pages are listed in order of ascending pin
count. Altera package outlines meet the requirements of JEDEC Publication No. 95.
1
All lidless flip chip and wire bond packages are non-vented packages. All other flip
chip packages are vented packages.
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
45
8-Pin Plastic Dual In-Line Package (PDIP)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in inches.
■
Pin 1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
P
Package Acronym
PDIP
Leadframe Material
Copper
Lead Finish (Plating)
Regular: 85Sn:15Pb (Typ.)
Pb-free: Matte Sn
JEDEC Outline Reference
MS-001 Variation: BA
Lead Coplanarity
NA
Weight
0.6 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Inches
Symbol
Min.
Nom.
Max.
A
—
—
0.170
A1
0.015
—
—
A2
D
0.360
—
0.380
E
0.300
0.310
0.325
E1
0.240
0.250
0.260
L
0.125
—
0.135
b
0.016
0.018
0.020
c
0.008
0.010
0.014
e
© December 2011
Altera Corporation
0.130 TYP
0.100 BSC
Package Information Datasheet for Mature Altera Devices
46
Package Information Datasheet for Mature Altera Devices
Package Outline
D
Pin 8
E
E1
Pin 1 ID
Pin 4
c
Pin 1
A
A2
A1
e
L
b
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
47
20-Pin Plastic J-Lead Chip Carrier (PLCC)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in inches.
■
Pin 1 is generally indicated by an indentation in the plastic body, in Pin 1's
proximity, on package surface.
Package Information
Description
Specification
Ordering Code Reference
L
Package Acronym
PLCC
Leadframe Material
Copper
Lead Finish (Plating)
Regular: 85Sn:15Pb (Typ.)
Pb-free: Matte Sn
JEDEC Outline Reference
MS-018 Variation: AA
Lead Coplanarity
0.004 inches (0.10mm)
Weight
0.8 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Inches
Symbol
Min.
Nom.
Max.
A
0.165
0.172
0.180
A1
0.020
—
—
A2
© December 2011
Altera Corporation
0.150 TYP
D
0.385
0.390
0.395
D1
0.350
0.353
0.356
D2
0.290
0.310
0.330
E
0.385
0.390
0.395
E1
0.350
0.353
0.356
E2
0.290
0.310
0.330
b
0.013
—
0.021
c
0.010 TYP
e
0.050 TYP
Package Information Datasheet for Mature Altera Devices
48
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
49
32-Pin Plastic Thin Quad Flat Pack (TQFP)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in millimeters.
■
Pin 1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
T
Package Acronym
TQFP
Leadframe Material
Copper
Lead Finish (Plating)
Regular: 85Sn:15Pb (Typ.)
Pb-free: Matte Sn
JEDEC Outline Reference
MS-026 Variation: ABA
Lead Coplanarity
0.004 inches (0.1mm)
Weight
0.2 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
1.20
A1
0.05
—
0.15
A2
0.95
1.00
1.05
D
9.00 BSC
D1
7.00 BSC
E
9.00 BSC
E1
L
7.00 BSC
0.45
L1
S
0.20
—
—
b
0.30
0.37
0.45
c
0.09
—
0.20

Altera Corporation
0.75
1.00 REF
e
© December 2011
0.60
0.80 BSC
0
3.5
7
Package Information Datasheet for Mature Altera Devices
50
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
51
44-Pin Plastic J-Lead Chip Carrier (PLCC)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in inches.
■
Pin 1 is generally indicated by an indentation in the plastic body, in Pin 1’s
proximity, on package surface.
Package Information
Description
Specification
Ordering Code Reference
L
Package Acronym
PLCC
Leadframe Material
Copper
Lead Finish (Plating)
Regular: 85Sn:15Pb (Typ.)
Pb-free: Matte Sn
JEDEC Outline Reference
MS-018
Variation: AC
Lead Coplanarity
0.004 inches (0.10 mm)
Weight
2.6 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Inches
Symbol
Min.
Nom.
Max.
A
0.165
0.172
0.180
A1
0.020
—
—
A2
© December 2011
Altera Corporation
0.150 TYP
D
0.685
0.690
0.695
D1
0.650
0.653
0.656
D2
0.582
0.610
0.638
E
0.685
0.690
0.695
E1
0.650
0.653
0.656
E2
0.582
0.610
0.638
b
0.013
—
0.021
c
0.010 TYP
e
0.050 TYP
Package Information Datasheet for Mature Altera Devices
52
Package Information Datasheet for Mature Altera Devices
Package Outline
D
D1
Pin 1
Pin 44
Pin 7
Pin 1 ID
E2
E
E1
Pin 17
e
c
A
A2
b
A1
D2
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
53
44-Pin Plastic Thin Quad Flat Pack (TQFP)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in millimeters.
■
Pin 1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
T
Package Acronym
TQFP
Leadframe Material
Copper
Lead Finish (Plating)
Regular: 85Sn:15Pb (Typ.)
Pb-free: Matte Sn
JEDEC Outline Reference
MS-026 Variation: ACB
Lead Coplanarity
0.004 inches (0.1mm)
Weight
0.3 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
1.20
A1
0.05
—
0.15
A2
0.95
—
—
D
12.00 BSC
D1
10.00 BSC
E
12.00 BSC
E1
L
10.00 BSC
0.45
L1
S
0.20
—
—
b
0.30
0.37
0.45
c
0.09
—
0.20

Altera Corporation
0.75
1.00 REF
e
© December 2011
0.60
0.80 BSC
0
3.5
7
Package Information Datasheet for Mature Altera Devices
54
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
55
49-Pin Ultra FineLine Ball-Grid Array (UBGA)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
U
Package Acronym
UBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MO-216 Variation: BAB-2
Lead Coplanarity
0.005 inches (0.12mm)
Weight
0.2 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
1.55
A1
0.20
—
—
A2
—
—
1.35
A3
0.70 TYP
D
7.00 BSC
E
7.00 BSC
b
e
© December 2011
Altera Corporation
0.40
0.50
0.60
0.80 BSC
Package Information Datasheet for Mature Altera Devices
56
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
57
64-Pin Plastic Enhanced Quad Flat Pack (EQFP)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
E
Package Acronym
EQFP
Leadframe Material
Copper
Lead Finish (plating)
Regular: 85Sn:15Pb (Typ.)
Pb-free: Matte Sn
JEDEC Outline Reference
MS-026 Variation: ABD-HD
Lead Coplanarity
0.003 inch (0.08 mm)
Weight
0.15 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
1.20
A1
0.05
—
0.15
A2
0.95
1.00
1.05
D
9.00 BSC
D1
7.00 BSC
D2
3.50
E
9.00 BSC
E1
7.00 BSC
3.50
4.50
5.50
L
0.45
0.60
0.75
1.00 REF
S
0.20
—
—
b
0.13
0.18
0.23
c
0.09
—
0.20
e

Altera Corporation
5.50
E2
L1
© December 2011
4.50
0.40 BSC
0°
3.5°
7°
Package Information Datasheet for Mature Altera Devices
58
Package Information Datasheet for Mature Altera Devices
Package Outline
TOP VIEW
BOTTOM VIEW
Pin 64
Pin 64
Pin 1
Pin 1
Pin 1 ID
Pin 16
Pin 16
See Detail A
Detail A
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
59
84-Pin Plastic J-Lead Chip Carrier (PLCC)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in inches.
■
Pin 1 is generally indicated by an indentation in the plastic body, in Pin 1's
proximity, on package surface.
Package Information
Description
Specification
Ordering Code Reference
L
Package Acronym
PLCC
Leadframe Material
Copper
Lead Finish (Plating)
Regular: 85Sn:15Pb (Typ.)
Pb-free: Matte Sn
JEDEC Outline Reference
MS-018 Variation: AF
Lead Coplanarity
0.004 inches (0.10mm)
Weight
7.9 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Inches
Symbol
Min.
Nom.
Max.
A
0.165
0.172
0.180
A1
0.020
—
—
A2
© December 2011
Altera Corporation
0.150 TYP
D
1.185
1.190
1.195
D1
1.150
1.154
1.158
D2
1.082
1.110
1.138
E
1.185
1.190
1.195
E1
1.150
1.154
1.158
E2
1.082
1.110
1.138
b
0.013
—
0.021
c
0.008 TYP
e
0.050 TYP
Package Information Datasheet for Mature Altera Devices
60
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
61
88-Pin Ultra FineLine Ball-Grid Array (UBGA)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
U
Package Acronym
UBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline
MO-219
Lead Coplanarity
0.005 inches (0.12 mm)
Weight
0.4 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
1.40
A1
0.25
—
—
A2
0.80
—
—
A3
0.70 REF
D
11.00 BSC
E
8.00 BSC
b
e
© December 2011
Altera Corporation
0.40
0.45
0.50
0.80 BSC
Package Information Datasheet for Mature Altera Devices
62
Package Information Datasheet for Mature Altera Devices
Package Outline
TOP VIEW
BOTTOM VIEW
D
Pin A1
Corner
12 11 10 9 8 7 6 5 4 3 2 1
A
B
C
D
E
Pin A1 ID
e
E
F
G
H
b
e
A
A2
A3
A1
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
63
100-Pin FineLine Ball-Grid Array (FBGA), Option 1—Wire Bond
1
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on the
package surface.
This POD is applicable to F100 packages of all products except MAX II, which is
assembled in Option 2 package outlines.
Package Information
Description
Specification
Ordering Code Reference
F
Package Acronym
FBGA
Substrate Material
BT
Solder ball composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MO-192 Variation: AAC-1
Lead Coplanarity
0.008 inches (0.20mm)
Weight
0.6 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Max.
A
—
—
1.70
0.30
—
—
A2
0.25
—
1.10
A3
—
—
0.80
D
11.00 BSC
E
11.00 BSC
e
Altera Corporation
Nom.
A1
b
© December 2011
Min.
0.50
0.60
0.70
1.00 BSC
Package Information Datasheet for Mature Altera Devices
64
Package Information Datasheet for Mature Altera Devices
Package Outline
BOTTOM VIEW
TOP VIEW
D
Pin A1
Corner
Pin A1 ID
e
E
b
e
A
A2
A3
A1
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
65
100-Pin Plastic Quad Flat Pack (PQFP)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in millimeters.
■
Pin 1 may be indicated by an ID dot, or a special feature, in its proximity on the
package surface.
Package Information
Description
Specification
Ordering Code Reference
Q
Package Acronym
PQFP
Leadframe Material
Copper
Lead Finish (Plating)
Regular: 85Sn:15Pb (Typ.)
Pb-free: Matte Sn
JEDEC Outline Reference
MS-022 Variation: GC-1
Lead Coplanarity
0.004 inches (0.10mm)
Weight
1.9 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
3.40
A1
0.25
—
0.50
A2
2.50
2.70
2.90
D
17.20 BSC
D1
14.00 BSC
E
23.20 BSC
E1
20.00 BSC
L
0.73
L1
1.60 REF
0.20
—
—
b
0.22
—
0.40
c
0.11
—
0.23

Altera Corporation
1.03
S
e
© December 2011
0.88
0.65 BSC
0
—
7
Package Information Datasheet for Mature Altera Devices
66
Package Information Datasheet for Mature Altera Devices
Package Outline
D
D1
Pin 100
Pin 1
Pin 1 ID
E
E1
Pin 30
A
A2
A1
See Detail A
Detail A
e
C
Gage
Plane
b
S
L
0.25mm
L1
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
67
100-Pin Plastic Thin Quad Flat Pack (TQFP)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in millimeters.
■
Pin 1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
T
Package Acronym
TQFP
Leadframe Material
Copper
Lead Finish (Plating)
Regular: 85Sn:15Pb (Typ.)
Pb-free: Matte Sn
JEDEC Outline Reference
MS-026 Variation: AED
Lead Coplanarity
0.003 inches (0.08mm)
Weight
0.6 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
1.20
A1
0.05
—
0.15
A2
0.95
1.00
1.05
D
16.00 BSC
D1
14.00 BSC
E
16.00 BSC
E1
14.00 BSC
L
0.45
L1
1.00 REF
0.20
—
—
b
0.17
0.22
0.27
c
0.09
—
0.20

Altera Corporation
0.75
S
e
© December 2011
0.60
0.50 BSC
0
3.5
7
Package Information Datasheet for Mature Altera Devices
68
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
69
144-Pin Plastic Enhanced Quad Flat Pack (EQFP)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in millimeters.
■
Pin 1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
E
Package Acronym
EQFP
Leadframe Material
Copper
Lead Finish (Plating)
Regular: 85Sn:15Pb (Typ.)
Pb-free: Matte Sn
JEDEC Outline Reference
MS-026 Variation: BFB
Lead Coplanarity
0.003 inches (0.08mm)
Weight
1.1 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
1.60
A1
0.05
—
0.15
A2
1.35
1.40
1.45
D
22.00 BSC
D1
20.00 BSC
D2
4.00
E
22.00 BSC
E1
20.00 BSC
4.00
—
—
L
0.45
0.60
0.75
1.00 REF
S
0.20
—
—
b
0.17
0.22
0.27
c
0.09
—
0.20
e

Altera Corporation
—
E2
L1
© December 2011
—
0.50 BSC
0
3.5
7
Package Information Datasheet for Mature Altera Devices
70
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
71
144-Pin FineLine Ball-Grid Array (FBGA)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
F
Package Acronym
FBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MO-192 Variation: AAD-1
Lead Coplanarity
0.008 inches (0.20mm)
Weight
0.8 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
2.20
A1
0.30
—
—
A2
0.25
—
1.80
A3
0.70 REF
D
13.00 BSC
E
13.00 BSC
b
e
© December 2011
Altera Corporation
0.50
0.60
0.70
1.00 BSC
Package Information Datasheet for Mature Altera Devices
72
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
73
144-Pin Plastic Thin Quad Flat Pack (TQFP)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in millimeters.
■
Pin 1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
T
Package Acronym
TQFP
Leadframe Material
Copper
Lead Finish (Plating)
Regular: 85Sn:15Pb (Typ.)
Pb-free: Matte Sn
JEDEC Outline Reference
MS-026 Variation: BFB
Lead Coplanarity
0.003 inches (0.08mm)
Weight
1.1 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
1.60
A1
0.05
—
0.15
A2
1.35
1.40
1.45
D
22.00 BSC
D1
20.00 BSC
E
22.00 BSC
E1
L
20.00 BSC
0.45
L1
S
0.20
—
—
b
0.17
0.22
0.27
c
0.09
—
0.20

Altera Corporation
0.75
1.00 REF
e
© December 2011
0.60
0.50 BSC
0
3.5
7
Package Information Datasheet for Mature Altera Devices
74
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
75
160-Pin Ceramic Pin-Grid Array (PGA)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in inches.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
G
Package Acronym
PGA
Leadframe Material
Alloy 42
Lead Finish
Gold Over Nickel Plate
JEDEC Outline Reference
MO-067 Variation: AG
Lead Coplanarity
N/A
Weight
19.9 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Inches
Symbol
A
Min.
Nom.
Max.
0.160
0.190
0.220
A1
0.050 TYP
A2
0.120
0.140
0.160
D
1.540
1.560
1.580
E
1.540
1.560
1.580
L
b
e
© December 2011
Altera Corporation
0.130 TYP
0.016
0.018
0.020
0.100 BSC
Package Information Datasheet for Mature Altera Devices
76
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
77
160-Pin Plastic Quad Flat Pack (PQFP)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in millimeters.
■
Pin 1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
Q
Package Acronym
PQFP
Leadframe Material
Copper
Lead Finish (Plating)
Regular: 85Sn:15Pb (Typ.)
Pb-free: Matte Sn
JEDEC Outline Reference
MS-022 Variation: DD-1
Lead Coplanarity
0.004 inches (0.10mm)
Weight
6.2 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
4.10
A1
0.25
—
0.50
A2
3.20
3.40
3.60
D
31.20 BSC
D1
28.00 BSC
E
31.20 BSC
E1
28.00 BSC
L
0.50
L1
1.60 REF
0.20
—
—
b
0.22
—
0.40
c
0.09
—
0.23
e
Altera Corporation
1.03
S

© December 2011
—
0.65 BSC
0
—
7
Package Information Datasheet for Mature Altera Devices
78
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
79
169-Pin Ultra FineLine Ball-Grid Array (UBGA)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
U
Package Acronym
UBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MO-216 Variation: BAF-1
Lead Coplanarity
0.005 inches (0.12mm)
Weight
0.6 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
1.70
A1
0.20
—
—
A2
0.65
—
—
A3
0.70 TYP
D
11.00 BSC
E
11.00 BSC
b
e
© December 2011
Altera Corporation
0.40
0.50
0.60
0.80 BSC
Package Information Datasheet for Mature Altera Devices
80
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
81
208-Pin Plastic Quad Flat Pack (PQFP)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin 1 may be indicated by an ID dot in its proximity on package surface.
Package Information
Description
Specification
Ordering Code Reference
Q
Package Acronym
PQFP
Lead Material
Copper
Lead Finish (Plating)
Regular: 85Sn:15Pb (Typ.)
Pb-free: Matte Sn
JEDEC Outline Reference
MS-029 Variation: FA-1
Lead Coplanarity
0.003 inches (0.08 mm)
Weight
6.3 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
4.10
A1
0.25
—
0.50
A2
3.20
3.40
3.60
D
30.60 BSC
D1
28.00 BSC
E
30.60 BSC
E1
L
28.00 BSC
0.50
L1
S
0.20
—
—
b
0.17
—
0.27
c
0.09
—
0.20

Altera Corporation
0.75
1.30 REF
e
© December 2011
0.60
0.50 BSC
0°
3.5°
8°
Package Information Datasheet for Mature Altera Devices
82
Package Information Datasheet for Mature Altera Devices
Package Outline
D
D1
Pin 208
Pin 1
Pin 1 ID
E
E1
Pin 52
A
A2
A1
See Detail A
Detail A
e
C
Gage
Plane
b
S
0.25mm
L
L1
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
83
208-Pin Power Quad Flat Pack (RQFP)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in millimeters.
■
Pin 1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
R
Package Acronym
RQFP
Leadframe Material
Copper
Lead Finish (Plating)
Regular: 85Sn:15Pb (Typ.)
Pb-free: Matte Sn
JEDEC Outline Reference
MS-029 Variation: FA-1
Lead Coplanarity
0.003 inches (0.08mm)
Weight
11.0 g (Typ.) or 6.4 g (Typ.) (1)
Moisture Sensitivity Level
Printed on moisture barrier bag
Note:
(1) The lighter weight is due to the change in heat slug material used (from nickel-plated copper to anodized
aluminum). Refer to PCN1002.
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
4.10
A1
0.25
—
0.50
A2
3.20
3.40
3.60
D
30.60 BSC
D1
28.00 BSC
E
30.60 BSC
E1
28.00 BSC
L
0.45
L1
S
0.20
—
—
b
0.17
—
0.27
c
0.09
—
0.20

Altera Corporation
0.75
1.30 REF
e
© December 2011
0.60
0.50 BSC
0
3.5
8
Package Information Datasheet for Mature Altera Devices
84
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
85
240-Pin Plastic Quad Flat Pack (PQFP)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in millimeters.
■
Pin 1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
Q
Package Acronym
PQFP
Leadframe Material
Copper
Lead Finish (Plating)
Regular: 85Sn:15Pb (Typ.)
Pb-free: Matte Sn
JEDEC Outline Reference
MS-029 Variation: GA
Lead Coplanarity
0.003 inches (0.08mm)
Weight
8.0 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
4.10
A1
0.25
—
0.50
A2
3.20
3.40
3.60
D
34.60 BSC
D1
32.00 BSC
E
34.60 BSC
E1
32.00 BSC
L
0.45
L1
0.20
—
—
b
0.17
—
0.27
c
0.09
—
0.20

Altera Corporation
0.75
S
e
© December 2011
0.60
1.30 REF
0.50 BSC
0
3.5
8
Package Information Datasheet for Mature Altera Devices
86
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
87
240-Pin Power Quad Flat Pack (RQFP)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in millimeters.
■
Pin 1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
R
Package Acronym
RQFP
Leadframe Material
Copper
Lead Finish (Plating)
Regular: 85Sn:15Pb (Typ.)
Pb-free: Matte Sn
JEDEC Outline Reference
MS-029 Variation: GA
Lead Coplanarity
0.003 inches (0.08mm)
Weight
15.4 g (Typ.) or 8.5 g (Typ.) (1)
Moisture Sensitivity Level
Printed on moisture barrier bag
Note:
(1) The lighter weight is due to the change in heat slug material used (from nickel-plated copper to anodized
aluminum). Refer to PCN1002.
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
4.10
A1
0.25
—
0.50
A2
3.20
3.40
3.60
D
34.60 BSC
D1
32.00 BSC
E
34.60 BSC
E1
32.00 BSC
L
0.45
L1
S
0.20
—
—
b
0.17
—
0.27
c
0.09
—
0.20

Altera Corporation
0.75
1.30 REF
e
© December 2011
0.60
0.50 BSC
0
3.5
8
Package Information Datasheet for Mature Altera Devices
88
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
89
256-Pin Ball-Grid Array (BGA), Option 1—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
B
Package Acronym
BGA
Substrate Material
BT or tape
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MO-192 Variation: BAL-2
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
4.8 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
1.70
A1
0.35
—
—
A2
0.25
—
1.10
D
27.00 BSC
E
27.00 BSC
b
e
© December 2011
Altera Corporation
0.60
0.75
0.90
1.27 BSC
Package Information Datasheet for Mature Altera Devices
90
Package Information Datasheet for Mature Altera Devices
Package Outline
TOP VIEW
BOTTOM VIEW
D
20 18 16 14 12 10 8 6 4 2
19 17 15 13 11 9 7 5 3 1
Pin A1
Corner
A
C
Pin A1 ID
E
e
G
J
E
L
N
R
U
W
b
B
D
F
H
K
M
P
T
V
Y
e
A
A2
A1
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
91
256-Pin Plastic Ball-Grid Array (BGA), Option 2—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
B
Package Acronym
BGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034
Variation: BAL-2
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
2.2 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
2.60
A1
0.35
—
—
A2
—
—
2.20
A3
—
—
1.80
D
27.00 BSC
E
27.00 BSC
b
e
© December 2011
Altera Corporation
0.60
0.75
0.90
1.27 BSC
Package Information Datasheet for Mature Altera Devices
92
Package Information Datasheet for Mature Altera Devices
Package Outline
TOP VIEW
BOTTOM VIEW
D
20
18
19
16
17
14
15
12
13
10
11
8
9
6
7
4
5
Pin A1
Corner
2
3
1
A
C
E
e
Pin A1 ID
G
J
E
L
N
R
U
W
b
B
D
F
H
K
M
P
T
V
Y
e
A
A2
A3
A1
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
93
256-Pin FineLine Ball-Grid Array (FBGA), Option 1—Wire Bond
1
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
This POD is applicable to F256 packages of all products listed in this datasheet except
Cyclone II, which are assembled in Option 2 package outlines.
Package Information
Description
Specification
Ordering Code Reference
F
Package Acronym
FBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034
Variation: AAF-1
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
1.5 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
2.20
A1
0.30
—
—
A2
—
—
1.80
A3
0.70 REF
D
17.00 BSC
E
17.00 BSC
b
e
© December 2011
Altera Corporation
0.50
0.60
0.70
1.00 BSC
Package Information Datasheet for Mature Altera Devices
94
Package Information Datasheet for Mature Altera Devices
Package Outline
TOP VIEW
BOTTOM VIEW
D
Pin A1
Corner
Pin A1 ID
e
E
b
e
A
A2
A3
A1
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
95
256-Pin FineLine Ball-Grid Array (FBGA), Option 2—Thin—Wire Bond
1
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on the
package surface.
This POD is applicable to F256 packages of the Cyclone II devices only.
Package Information
Description
Specification
Ordering Code Reference
F
Package Acronym
FBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MO-192
Variation: DAF-1
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
1.5 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
1.55
A1
0.25
—
—
A2
A3
1.05 REF
—
D
e
© December 2011
Altera Corporation
0.80
17.00 BSC
E
b
—
17.00 BSC
0.45
0.50
0.55
1.00 BSC
Package Information Datasheet for Mature Altera Devices
96
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
97
324-Pin FineLine Ball-Grid Array (FBGA)—Wire Bond—Option 1
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
F
Package Acronym
FBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034 Variation: AAG-1
Lead Coplanarity
0.008 inches (0.20mm)
Weight
1.4 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
2.20
A1
0.30
—
—
A2
—
—
1.80
A3
0.70 REF
D
19.00 BSC
E
19.00 BSC
b
e
© December 2011
Altera Corporation
0.50
0.60
0.70
1.00 BSC
Package Information Datasheet for Mature Altera Devices
98
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
99
356-Pin Ball-Grid Array (BGA)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
B
Package Acronym
BGA
Substrate Material
BT or tape
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MO-192 Variation: BAR-2
Lead Coplanarity
0.008 inches (0.20mm)
Weight
7.7 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
1.70
A1
0.35
—
—
A2
0.25
—
1.10
D
35.00 BSC
E
35.00 BSC
b
e
© December 2011
Altera Corporation
0.60
0.75
0.90
1.27 BSC
Package Information Datasheet for Mature Altera Devices
100
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
101
400-Pin FineLine Ball-Grid Array (FBGA)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
F
Package Acronym
FBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034 Variation: AAH-1
Lead Coplanarity
0.008 inches (0.20mm)
Weight
2.3 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeteres
Symbol
Max.
A
—
—
2.20
0.30
—
—
A2
—
—
1.80
A3
0.80 REF
D
21.00 BSC
E
21.00 BSC
e
Altera Corporation
Nom.
A1
b
© December 2011
Min.
0.50
0.60
0.70
1.00 BSC
Package Information Datasheet for Mature Altera Devices
102
Package Information Datasheet for Mature Altera Devices
Package Outline
BOTTOM VIEW
TOP VIEW
Pin A1
Corner
D
Pin A1 ID
e
E
b
e
A
A2
A3
A1
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
103
403-Pin Ceramic Pin-Grid Array (PGA)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in inches.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
G
Package Acronym
PGA
Leadframe Material
Alloy 42
Lead Finish
Gold Over Nickel Plate
JEDEC Outline Reference
MO-128 Variation: AL
Lead Coplanarity
N/A
Weight
47.7 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Inches
Symbol
A
Min.
Nom.
Max.
0.157
0.180
0.203
A1
0.050 TYP
A2
0.117
0.130
0.143
D
1.940
1.960
1.980
E
1.940
1.960
1.980
L
b
e
© December 2011
Altera Corporation
0.130 TYP
0.016
0.018
0.020
0.100 BSC
Package Information Datasheet for Mature Altera Devices
104
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
105
484-Pin FineLine Ball-Grid Array (FBGA), Option 1—Flip Chip
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on the
package surface.
Package Information
Description
Specification
Ordering Code Reference
F
Package Acronym
FBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034 Variation: AAJ-1
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
6.8 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Max.
A
—
—
3.50
0.30
—
—
A2
0.25
—
3.00
A3
—
—
2.50
D
23.00 BSC
E
23.00 BSC
e
Altera Corporation
Nom.
A1
b
© December 2011
Min.
0.50
0.60
0.70
1.00 BSC
Package Information Datasheet for Mature Altera Devices
106
Package Information Datasheet for Mature Altera Devices
Package Outline
TOP VIEW
BOTTOM VIEW
Pin A1
Corner
D
Pin A1 ID
e
E
b
e
A
A2
A3
A1
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
107
484-Pin FineLine Ball-Grid Array (FBGA), Option 1—Flip Chip—Channel Lid
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on the
package surface.
Package Information
Description
Specification
Ordering Code Reference
F
Package Acronym
FBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MO-034 Variation: AAJ-1
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
6.8 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
A
2.95
3.15
3.35
0.40
0.50
0.60
A2
2.35
2.65
2.95
A3
1.35
1.45
1.55
D
23.00 BSC
E
23.00 BSC
e
Altera Corporation
Max.
A1
b
© December 2011
Nom.
0.50
0.60
0.70
1.00 BSC
Package Information Datasheet for Mature Altera Devices
108
Package Information Datasheet for Mature Altera Devices
Package Outline
TOP VIEW
BOTTOM VIEW
Pin A1
Corner
D
Pin A1 ID
e
E
b
e
A
A2
A3
A1
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
109
484-Pin FineLine Ball-Grid Array (FBGA), Option 2—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
F
Package Acronym
FBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
2.6 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Variation: AAJ-1
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
2.60
A1
0.30
—
—
A2
—
—
2.20
A3
—
—
1.80
D
23.00 BSC
E
23.00 BSC
b
e
© December 2011
Altera Corporation
0.50
0.60
0.70
1.00 BSC
Package Information Datasheet for Mature Altera Devices
110
Package Information Datasheet for Mature Altera Devices
Package Outline
BOTTOM VIEW
TOP VIEW
Pin A1
Corner
D
Pin A1 ID
e
E
e
b
A3
A
A2
A1
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
111
484-Pin FineLine Ball-Grid Array (FBGA), Option 4—Flip Chip
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
F
Package Acronym
FBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
5.3 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Variation: AAJ-1
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
3.50
A1
0.30
—
—
A2
0.25
—
3.00
A3
—
—
2.50
D
23.00 BSC
D1
17.00 BSC
E
23.00 BSC
E1
17.00 BSC
b
e
© December 2011
Altera Corporation
0.50
0.60
0.70
1.00 BSC
Package Information Datasheet for Mature Altera Devices
112
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
113
484-Pin FineLine Ball-Grid Array (FBGA)—Wire Bond—A:2.40
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
F
Package Acronym
FBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
2.3 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Variation: AAJ-1
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
2.10
2.25
2.40
A1
0.40
0.50
0.60
A2
1.50
1.75
2.00
A3
1.12
1.17
1.22
D
23.00 BSC
E
23.00 BSC
b
e
© December 2011
Altera Corporation
0.50
0.60
0.70
1.00 BSC
Package Information Datasheet for Mature Altera Devices
114
Package Information Datasheet for Mature Altera Devices
Package Outline
A
A2
A3
A1
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
115
484-Pin Hybrid FineLine Ball-Grid Array (HBGA)—Flip Chip
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
H
Package Acronym
HBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034 Variation: AAL-1
Lead Coplanarity
0.008 inches (0.20mm)
Weight
11.3 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
3.50
A1
0.30
—
—
A2
0.25
—
3.00
A3
—
—
2.50
D
27.00 BSC
E
27.00 BSC
b
e
© December 2011
Altera Corporation
0.50
0.60
0.70
1.00 BSC
Package Information Datasheet for Mature Altera Devices
116
Package Information Datasheet for Mature Altera Devices
Package Outline
TOP VIEW
BOTTOM VIEW
D
Pin A1
Corner
Pin A1 ID
e
E
e
b
A
A2
A3
A1
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
117
484-Pin Ultra FineLine Ball-Grid Array (UBGA)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
U
Package Acronym
UBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MO-216 Variation: BAP-2
Lead Coplanarity
0.005 inches (0.12mm)
Weight
1.6 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Max.
A
—
—
2.20
0.20
—
—
A2
0.65
—
—
A3
0.95 TYP
D
19.00 BSC
E
19.00 BSC
e
Altera Corporation
Nom.
A1
b
© December 2011
Min.
0.40
0.50
0.60
0.80 BSC
Package Information Datasheet for Mature Altera Devices
118
Package Information Datasheet for Mature Altera Devices
Package Outline
TOP VIEW
BOTTOM VIEW
Pin A1
Corner
D
Pin A1 ID
e
E
e
b
A
A3
A2
A1
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
119
503-Pin Ceramic Pin-Grid Array (PGA)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in inches.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
G
Package Acronym
PGA
Leadframe Material
Alloy 42
Lead Finish
Gold Over Nickel Plate
JEDEC Outline Reference
MO-128
Lead Coplanarity
N/A
Weight
59.0 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Variation: AN
Package Outline Dimension Table
Inches
Symbol
A
Min.
Nom.
Max.
—
—
0.205
A1
0.050 TYP
A2
—
—
0.145
D
2.245
2.260
2.275
E
2.245
2.260
2.275
L
b
e
© December 2011
Altera Corporation
0.130 TYP
0.016
0.018
0.020
0.100 BSC
Package Information Datasheet for Mature Altera Devices
120
Package Information Datasheet for Mature Altera Devices
Package Outline
TOP VIEW
BOTTOM VIEW
D
Pin A1
Corner
42 40 38 36 34 32 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2
43 41 39 37 35 33 31 29 27 25 23 21 19 17 15 13 11 9 7 5 3 1
A
C
Pin A1 ID
E
G
J
e
L
N
R
U
B
D
F
H
K
M
P
T
1
E
V
W
Y
AA
AB
AC
AD
AE
AF
AG
AH
AJ
AK
AL
AM
AN
AP
AR
AT
AU
AV
AW
AY
BA
BB
BC
2
e
b
1
2
e
e
A
A2
A1
L
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
121
599-Pin Ceramic Pin-Grid Array (PGA)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in inches.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
G
Package Acronym
PGA
Leadframe Material
Alloy 42
Lead Finish
Gold over Nickel Plate
JEDEC Outline Reference
MO-128 Variation: AP
Lead Coplanarity
N/A
Weight
69.0 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Inches
Symbol
A
Min.
Nom.
Max.
—
—
0.205
A1
0.050 TYP
A2
—
—
0.145
D
2.445
2.460
2.475
E
2.445
2.460
2.475
L
b
e
© December 2011
Altera Corporation
0.130 TYP
0.016
0.018
0.020
0.100 BSC
Package Information Datasheet for Mature Altera Devices
122
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
123
600-Pin Ball-Grid Array (BGA)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
B
Package Acronym
BGA
Substrate Material
BT or tape
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MO-192 Variation: BAW-1
Lead Coplanarity
0.008 inches (0.20mm)
Weight
12.0 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
2.00
A1
0.35
—
—
A2
0.25
—
1.10
D
45.00 BSC
E
b
e
© December 2011
Altera Corporation
45.00 BSC
0.60
0.75
0.90
1.27 BSC
Package Information Datasheet for Mature Altera Devices
124
Package Information Datasheet for Mature Altera Devices
Package Outline
TOP VIEW
BOTTOM VIEW
D
34 32 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2
35 33 31 29 27 25 23 21 19 17 15 13 11 9 7 5 3 1
Pin A1
Corner
A
C
Pin A1 ID
E
e
G
J
L
N
R
E
U
W
AA
AC
AE
AG
AJ
AL
AN
B
D
F
H
K
M
P
T
V
Y
AB
AD
AF
AH
AK
AM
AP
AR
b
e
A
A2
A1
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
125
652-Pin Ball-Grid Array (BGA), Option 1—Flip Chip
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
B
Package Acronym
BGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034
Variation: BAW-1
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
23.8 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
3.50
A1
0.30
—
—
A2
0.25
—
3.00
A3
—
—
2.50
D
45.00 BSC
E
45.00 BSC
b
e
© December 2011
Altera Corporation
0.60
0.75
0.90
1.27 BSC
Package Information Datasheet for Mature Altera Devices
126
Package Information Datasheet for Mature Altera Devices
Package Outline
TOP VIEW
BOTTOM VIEW
D
34
35
32
33
30
31
28
29
26
27
25
Pin A1
Corner
6
4
2
24 22 20 18 16 14 12 10 8
7
5
3
1
23 21 19 17 15 13 11 9
A
B
C
D
Pin A1 ID
E
e
F
G
H
J
K
L
M
N
P
R
T
E
U
V
W
Y
AA
AB
AC
AD
AE
AF
AG
AH
AJ
AK
AL
AM
AN
AP
AR
b
e
A
A2
A3
A1
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
127
652-Pin Plastic Ball-Grid Array (BGA), Option 2—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
B
Package Acronym
BGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034
Variation: BAW-1
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
15.9 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
3.20
A1
0.35
—
—
A2
—
—
2.80
A3
—
—
2.40
D
45.00 BSC
E
45.00 BSC
b
e
© December 2011
Altera Corporation
0.60
0.75
0.90
1.27 BSC
Package Information Datasheet for Mature Altera Devices
128
Package Information Datasheet for Mature Altera Devices
Package Outline
TOP VIEW
BOTTOM VIEW
D
Pin A1
Corner
34 32 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2
35 33 31 29 27 25 23 21 19 17 15 13 11 9 7 5 3 1
A
C
E
G
J
e
Pin A1 ID
L
N
R
E
U
W
AA
AC
AE
AG
AJ
AL
AN
AR
B
D
F
H
K
M
P
T
V
Y
AB
AD
AF
AH
AK
AM
AP
e
b
A
A2
A3
A1
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
129
652-Pin Plastic Ball-Grid Array (BGA), Option 3—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
B
Package Acronym
BGA
Substrate Material
BT or tape
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MO-192 Variation: BAW-1
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
15.1 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
2.00
A1
0.35
—
—
A2
0.25
—
1.10
D
45.00 BSC
E
45.00 BSC
b
e
© December 2011
Altera Corporation
0.60
0.75
0.90
1.27 BSC
Package Information Datasheet for Mature Altera Devices
130
Package Information Datasheet for Mature Altera Devices
Package Outline
TOP VIEW
BOTTOM VIEW
D
34 32 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2
35 33 31 29 27 25 23 21 19 17 15 13 11 9 7 5 3 1
Pin A1
Corner
A
C
Pin A1 ID
E
e
G
J
L
N
R
E
U
W
AA
AC
AE
AG
AJ
AL
AN
B
D
F
H
K
M
P
T
V
Y
AB
AD
AF
AH
AK
AM
AP
AR
b
e
A
A2
A1
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
131
655-Pin Ceramic Pin-Grid Array (PGA)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in inches.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
G
Package Acronym
PGA
Leadframe Material
Alloy 42
Lead Finish
Gold over Nickel Plate
JEDEC Outline Reference
MO-128 Variation: AP
Lead Coplanarity
N/A
Weight
74.9 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Inches
Symbol
A
Min.
Nom.
Max.
—
—
0.205
A1
0.050 TYP
A2
—
—
0.145
D
2.445
2.460
2.475
E
2.445
2.460
2.475
L
b
e
© December 2011
Altera Corporation
0.130 TYP
0.016
0.018
0.020
0.100 BSC
Package Information Datasheet for Mature Altera Devices
132
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
133
672-Pin Plastic Ball-Grid Array (BGA)—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
B
Package Acronym
BGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034
Variation: BAR-2
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
5.8 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
2.60
A1
0.35
—
—
A2
—
—
2.20
A3
—
—
1.80
D
35.00 BSC
E
35.00 BSC
b
e
© December 2011
Altera Corporation
0.60
0.75
0.90
1.27 BSC
Package Information Datasheet for Mature Altera Devices
134
Package Information Datasheet for Mature Altera Devices
Package Outline
TOP VIEW
BOTTOM VIEW
D
26
24
25
22
23
20
21
18
19
16
17
14
15
12
13
10
11
8
9
6
7
Pin A1
Corner
2
4
5
3
1
A
B
C
D
E
F
Pin A1 ID
G
e
H
J
K
L
M
E
N
P
R
T
U
V
W
Y
AA
AB
AC
AD
AE
AF
e
b
A
A2
A3
A1
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
135
672-Pin FineLine Ball-Grid Array (FBGA), Option 1—Flip Chip
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
F
Package Acronym
FBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034
Variation: AAL-1
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
9.5 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
3.50
A1
0.30
—
—
A2
0.25
—
3.00
A3
—
—
2.50
D
27.00 BSC
E
27.00 BSC
b
e
© December 2011
Altera Corporation
0.50
0.60
0.70
1.00 BSC
Package Information Datasheet for Mature Altera Devices
136
Package Information Datasheet for Mature Altera Devices
Package Outline
TOP VIEW
BOTTOM VIEW
D
Pin A1
Corner
Pin A1 ID
e
E
e
b
A
A2
A3
A1
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
137
672-Pin FineLine Ball-Grid Array (FBGA), Option 2—Wire Bond
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
F
Package Acronym
FBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034
Variation: AAL-1
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
3.8 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
2.60
A1
0.30
—
—
A2
—
—
2.20
A3
—
—
1.80
D
27.00 BSC
E
27.00 BSC
b
e
© December 2011
Altera Corporation
0.50
0.60
0.70
1.00 BSC
Package Information Datasheet for Mature Altera Devices
138
Package Information Datasheet for Mature Altera Devices
Package Outline
TOP VIEW
BOTTOM VIEW
D
Pin A1
Corner
Pin A1 ID
e
E
e
b
A
A2
A3
A1
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
139
672-Pin FineLine Ball-Grid Array (FBGA), Option 4—Flip Chip
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
F
Package Acronym
FBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034
Variation: AAL-1
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
7.1 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
3.50
A1
0.30
—
—
A2
0.25
—
3.00
A3
—
—
2.50
D
27.00 BSC
D1
20.00 BSC
E
27.00 BSC
E1
20.00 BSC
b
e
© December 2011
Altera Corporation
0.50
0.60
0.70
1.00 BSC
Package Information Datasheet for Mature Altera Devices
140
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
141
672-Pin FineLine Ball-Grid Array (FBGA)—Wire Bond—A:2.40
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
F
Package Acronym
FBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034
Variation: AAL-1
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
3.0 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
2.10
2.25
2.40
A1
0.40
0.50
0.60
A2
1.50
1.75
2.00
A3
1.12
1.17
1.22
D
27.00 BSC
E
27.00 BSC
b
e
© December 2011
Altera Corporation
0.50
0.60
0.70
1.00 BSC
Package Information Datasheet for Mature Altera Devices
142
Package Information Datasheet for Mature Altera Devices
Package Outline
e
b
e
A
A2
A3
A1
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
143
724-Pin Ball-Grid Array (BGA)—Flip Chip
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
B
Package Acronym
BGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034
Variation: BAR-1
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
13.6 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
3.50
A1
0.30
—
—
A2
0.25
—
3.00
A3
—
—
2.50
D
35.00 BSC
E
35.00 BSC
b
e
© December 2011
Altera Corporation
0.60
0.75
0.90
1.27 BSC
Package Information Datasheet for Mature Altera Devices
144
Package Information Datasheet for Mature Altera Devices
Package Outline
TOP VIEW
BOTTOM VIEW
D
Pin A1
Corner
Pin A1 ID
e
E
b
e
A
A2
A3
A1
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
145
780-Pin FineLine Ball-Grid Array (FBGA), Option 1—Flip Chip
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
F
Package Acronym
FBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034
Variation: AAM-1
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
10.7 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
3.50
A1
0.30
—
—
A2
0.25
—
3.00
A3
—
—
2.50
D
29.00 BSC
E
29.00 BSC
b
e
© December 2011
Altera Corporation
0.50
0.60
0.70
1.00 BSC
Package Information Datasheet for Mature Altera Devices
146
Package Information Datasheet for Mature Altera Devices
Package Outline
TOP VIEW
BOTTOM VIEW
D
Pin A1
Corner
Pin A1 ID
e
E
e
b
A
A2
A3
A1
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
147
780-Pin FineLine Ball-Grid Array (FBGA), Option 1—Flip Chip—Channel Lid
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
F
Package Acronym
FBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MO-034
Variation: AAM-1
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
9.5 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
3.05
3.25
3.45
A1
0.40
0.50
0.60
A2
2.45
2.75
3.05
A3
1.45
1.55
1.65
D
29.00 BSC
E
29.00 BSC
b
e
© December 2011
Altera Corporation
0.50
0.60
0.70
1.00 BSC
Package Information Datasheet for Mature Altera Devices
148
Package Information Datasheet for Mature Altera Devices
Package Outline
TOP VIEW
BOTTOM VIEW
D
Pin A1
Corner
Pin A1 ID
e
E
e
b
A
A2
A3
A1
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
149
780-Pin FineLine Ball-Grid Array (FBGA), Option 3—Flip Chip
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
F
Package Acronym
FBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034
Variation: AAM-1
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
8.2 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
3.50
A1
0.30
—
—
A2
0.25
—
3.00
A3
—
—
2.50
D
29.00 BSC
D1
21.00 BSC
E
29.00 BSC
E1
21.00 BSC
b
e
© December 2011
Altera Corporation
0.50
0.60
0.70
1.00 BSC
Package Information Datasheet for Mature Altera Devices
150
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
151
896-Pin FineLine Ball-Grid Array (FBGA)—Wire Bond—A:2.40
■
All dimensions and tolerances conform to ASME Y14.5M – 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
F
Package Acronym
FBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
3.9 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Variation: AAN-1
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
2.10
2.25
2.40
A1
0.40
0.50
0.60
A2
1.50
1.75
2.00
A3
1.12
1.17
1.22
D
31.00 BSC
E
31.00 BSC
b
e
© December 2011
Altera Corporation
0.50
0.60
0.70
1.00 BSC
Package Information Datasheet for Mature Altera Devices
152
Package Information Datasheet for Mature Altera Devices
Package Outline
D
e
E
b
e
A
A2
A3
A1
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
153
956-Pin Ball-Grid Array (BGA), Option 1—Flip Chip
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
B
Package Acronym
BGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034
Variation: BAU-1
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
19.6 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Max.
A
—
—
3.50
0.30
—
—
A2
0.25
—
3.00
A3
—
—
2.50
D
40.00 BSC
E
40.00 BSC
e
Altera Corporation
Nom.
A1
b
© December 2011
Min.
0.60
0.75
0.90
1.27 BSC
Package Information Datasheet for Mature Altera Devices
154
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
155
956-Pin Ball-Grid Array (BGA), Option 2—Flip Chip
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
B
Package Acronym
BGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034
Variation: BAU-1
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
17.0 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Max.
A
—
—
3.50
0.30
—
—
A2
0.25
—
3.00
A3
—
—
2.50
D
40.00 BSC
D1
30.00 BSC
E
40.00 BSC
E1
30.00 BSC
e
Altera Corporation
Nom.
A1
b
© December 2011
Min.
0.60
0.75
0.90
1.27 BSC
Package Information Datasheet for Mature Altera Devices
156
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
157
1020-Pin FineLine Ball-Grid Array (FBGA), Option 1—Flip Chip
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
F
Package Acronym
FBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034
Variation: AAP-1
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
13.8 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
3.50
A1
0.30
—
—
A2
0.25
—
3.00
A3
—
—
2.50
D
33.00 BSC
E
33.00 BSC
b
e
© December 2011
Altera Corporation
0.50
0.60
0.70
1.00 BSC
Package Information Datasheet for Mature Altera Devices
158
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
159
1020-Pin FineLine Ball-Grid Array (FBGA), Option 2—Flip Chip
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
F
Package Acronym
FBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034
Variation: AAP-1
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
10.8 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
3.50
A1
0.30
—
—
A2
0.25
—
3.00
A3
—
—
2.50
D
33.00 BSC
D1
26.00 BSC
E
33.00 BSC
E1
26.00 BSC
b
e
© December 2011
Altera Corporation
0.50
0.60
0.70
1.00 BSC
Package Information Datasheet for Mature Altera Devices
160
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
161
1152-Pin FineLine Ball-Grid Array (FBGA), Option 1—Flip Chip
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
F
Package Acronym
FBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034
Variation: AAR-1
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
15.5 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Max.
A
—
—
3.50
0.30
—
—
A2
0.25
—
3.00
A3
—
—
2.50
D
35.00 BSC
E
35.00 BSC
e
Altera Corporation
Nom.
A1
b
© December 2011
Min.
0.50
0.60
0.70
1.00 BSC
Package Information Datasheet for Mature Altera Devices
162
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
163
1152-Pin FineLine Ball-Grid Array (FBGA), Option 2—Flip Chip
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
F
Package Acronym
FBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034
Variation: AAR-1
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
12.4 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
3.50
A1
0.30
—
—
A2
0.25
—
3.00
A3
—
—
2.50
D
35.00 BSC
D1
27.00 BSC
E
35.00 BSC
E1
b
e
© December 2011
Altera Corporation
27.00 BSC
0.50
0.60
0.70
1.00 BSC
Package Information Datasheet for Mature Altera Devices
164
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
165
1508-Pin FineLine Ball-Grid Array (FBGA), Option 1—Flip Chip
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
F
Package Acronym
FBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034
Variation: AAU-1
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
18.9 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
3.50
A1
0.30
—
—
A2
0.25
—
3.00
A3
—
—
2.50
D
40.00 BSC
E
40.00 BSC
b
e
© December 2011
Altera Corporation
0.50
0.60
0.70
1.00 BSC
Package Information Datasheet for Mature Altera Devices
166
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
167
1508-Pin FineLine Ball-Grid Array (FBGA), Option 2—Flip Chip
■
All dimensions and tolerances conform to ASME Y14.5M - 1994.
■
Controlling dimension is in millimeters.
■
Pin A1 may be indicated by an ID dot, or a special feature, in its proximity on
package surface.
Package Information
Description
Specification
Ordering Code Reference
F
Package Acronym
FBGA
Substrate Material
BT
Solder Ball Composition
Regular: 63Sn:37Pb (Typ.)
Pb-free: Sn:3Ag:0.5Cu (Typ.)
JEDEC Outline Reference
MS-034
Variation: AAU-1
Lead Coplanarity
0.008 inches (0.20 mm)
Weight
15.9 g (Typ.)
Moisture Sensitivity Level
Printed on moisture barrier bag
Package Outline Dimension Table
Millimeters
Symbol
Min.
Nom.
Max.
A
—
—
3.50
A1
0.30
—
—
A2
0.25
—
3.00
A3
—
—
2.50
D
40.00 BSC
D1
30.00 BSC
E
40.00 BSC
E1
30.00 BSC
b
e
© December 2011
Altera Corporation
0.50
0.60
0.70
1.00 BSC
Package Information Datasheet for Mature Altera Devices
168
Package Information Datasheet for Mature Altera Devices
Package Outline
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Additional Information
i
Additional Information
This section contains revision history and contact information.
Revision History
Table 60 lists the revision history for this document.
Table 60. Document Revision History (1) (Part 1 of 13)
Date and Document
Version
Changes Made
Summary of Changes
December 2011
■
Updated for version 16.8
Added “896-Pin FineLine Ball-Grid Array (FBGA)—Wire Bond—
A:2.40”, “484-Pin FineLine Ball-Grid Array (FBGA)—Wire Bond—
A:2.40”, and “672-Pin FineLine Ball-Grid Array (FBGA)—Wire Bond—
A:2.40”.
November 2011
■
Added Table 9 on page 10.
Updated for version 16.7
August 2011
■
Removed HardCopy III, HardCopy IV, MAX V, MAX II, Classic, and
EPCS devices’ package listing and thermal resistance values.
Updated for version 16.6
July 2011
■
Removed Arria II, Stratix V, Stratix IV, Stratix III, Cyclone IV, and
Cyclone III devices’ package listing and thermal resistance values.
Updated for version 16.5
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
ii
Package Information Datasheet for Mature Altera Devices
Additional Information
Table 60. Document Revision History (1) (Part 2 of 13)
Date and Document
Version
June 2011
Changes Made
Summary of Changes
■
Updated package diagram in “780-Pin FineLine Ball-Grid Array
(FBGA)—Flip Chip—Dual-Piece Lid (EP3SL150)” and “780-Pin
FineLine Ball-Grid Array (FBGA)—Flip Chip—Dual-Piece Lid
(EP3SE110)”
■
Added Table 30 and Table 58.
■
Updated the A and A2 dimension values in “780-Pin FineLine BallGrid Array (FBGA)—Flip Chip—Channel Lid (EP4SGX230)” and “780Pin FineLine Ball-Grid Array (FBGA)—Flip Chip—Channel Lid
(EP4SE230)”.
■
Updated the D1 and E1 dimension values in “1152-Pin FineLine BallGrid Array (FBGA)—Flip Chip—Single-Piece Lid (EP4SGX290)” and
“1152-Pin FineLine Ball-Grid Array (FBGA)—Flip Chip—Single-Piece
Lid (EP4SGX360)”.
■
Updated Table 13.
■
Updated the b, A, and A2 dimension values in “256-Pin Ultra FineLine
Ball-Grid Array (UBGA)—Wire Bond—Thin (EP3C10)”, “256-Pin
Ultra FineLine Ball-Grid Array (UBGA)—Wire Bond—Thin (EP3C16)”
and “256-Pin Ultra FineLine Ball-Grid Array (UBGA)—Wire Bond—
Thin (EP3C25)”.
■
Updated information in “Package Outlines”.
■
Added new package diagram for “1152-Pin FineLine Ball-Grid Array
(HBGA)—Flip Chip—Dual-Piece Lid (EP3SL340)”, and “780-Pin
FineLine Ball-Grid Array (FBGA)—Flip Chip—Channel Lid
(EP4SGX180)”.
■
Added new 1760-pin packages for 5SGXB5 and 5SGXB6 devices:
“1760-Pin FineLine Ball-Grid Array (FBGA)—Flip Chip—Single-Piece
Lid—A:3.40” to replace the 1932-pin packages for 5SGXB5 and
5SGXB6 devices.
■
Updated cross reference for 5SGXB5 and 5SGXB6 1517-pin package
diagram in Table 3.
■
Updated table Table 33.
Package Information Datasheet for Mature Altera Devices
Updated for version 16.4
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Additional Information
iii
Table 60. Document Revision History (1) (Part 3 of 13)
Date and Document
Version
December 2010
© December 2011
Changes Made
Summary of Changes
Updated for version 16.3
■
Updated document title and metadata.
■
Updated Table 43 with new thermal resistance value for EP3C16
(U484 Wire Bond package) and EP3C40 (U484 Wire Bond and F780
Wire Bond packages).
■
Updated note 3 in Table 9.
■
Updated Table 19 and Table 53 to remove dual-piece lid options for
HardCopy II devices.
■
Added Arria II GZ device package listing in Table 2 and Arria II GZ
thermal resistance in Table 35.
■
Added Stratix V device package listing in Table 4 and Stratix V thermal
resistance in Table 37.
■
Added MAX V device package listing in Table 13 and MAX V thermal
resistance in Table 46.
■
Added new Cyclone IV device package in Table 9 and thermal
resistance values in Table 42.
■
Updated lead coplanarity and A3 dimension values in 358-Pin Ultra
FineLine Ball-Grid Array (UBGA)—Flip Chip, 358-Pin Ultra FineLine
Ball-Grid Array (UBGA)—Flip Chip—Lidless (EP2AGX45), and 358Pin Ultra FineLine Ball-Grid Array (UBGA)—Flip Chip—Lidless
(EP2AGX65).
■
Added new package diagram for 1932-Pin FineLine Ball-Grid Array
(FBGA)—Flip Chip—Single-Piece Lid (EP4SGX360), 324-Pin
FineLine Ball-Grid Array (FBGA)—Wire Bond (EPM2210), and 324Pin FineLine Ball-Grid Array (FBGA)—Wire Bond (EPM2210G).
Altera Corporation
Package Information Datasheet for Mature Altera Devices
iv
Package Information Datasheet for Mature Altera Devices
Additional Information
Table 60. Document Revision History (1) (Part 4 of 13)
Date and Document
Version
September 2010
Changes Made
Summary of Changes
Updated for version 16.2
■
Updated JEDEC Outline Reference for “144-Pin Plastic Enhanced
Quad Flat Pack (EQFP)—Wire Bond (EP3C10)”, “144-Pin Plastic
Enhanced Quad Flat Pack (EQFP)—Wire Bond—(EP3C16)”, and
“144-Pin Plastic Enhanced Quad Flat Pack (EQFP)—Wire Bond—
(EP3C25)”.
■
Updated dimension value for Arria II GX devices: “572-Pin FineLine
Ball-Grid Array (FBGA)—Lidless—Flip Chip (EP2AGX95)”, “780-Pin
FineLine Ball-Grid Array (FBGA)—Flip Chip—Lidless (EP2AGX95)”,
“1152-Pin FineLine Ball-Grid Array (FBGA)—Flip Chip—Lidless
(EP2AGX95)”, “572-Pin FineLine Ball-Grid Array (FBGA)—Lidless—
Flip Chip (EP2AGX65)”, “780-Pin FineLine Ball-Grid Array (FBGA)—
Flip Chip—Lidless (EP2AGX65)”, “572-Pin FineLine Ball-Grid Array
(FBGA)—Lidless—Flip Chip (EP2AGX45)”,“780-Pin FineLine BallGrid Array (FBGA)—Flip Chip—Lidless (EP2AGX45)”, “1152-Pin
FineLine Ball-Grid Array (FBGA)—Flip Chip—Lidless (EP2AGX260)”,
“780-Pin FineLine Ball-Grid Array (FBGA)—Flip Chip—Lidless
(EP2AGX260)”, “1152-Pin FineLine Ball-Grid Array (FBGA)—Flip
Chip—Lidless (EP2AGX190)”, “780-Pin FineLine Ball-Grid Array
(FBGA)—Flip Chip—Lidless (EP2AGX190)”, “1152-Pin FineLine BallGrid Array (FBGA)—Flip Chip—Lidless (EP2AGX125)”, “780-Pin
FineLine Ball-Grid Array (FBGA)—Flip Chip—Lidless (EP2AGX125)”,
and “572-Pin FineLine Ball-Grid Array (FBGA)—Lidless—Flip Chip
(EP2AGX125)”.
■
Updated dimension value for HardCopy devices: “1517-Pin FineLine
Ball-Grid Array (FBGA)—Flip Chip—Lidless (HC4E35)”, “1152-Pin
FineLine Ball-Grid Array (FBGA)—Flip Chip—Lidless (HC4E35)”,
“1517-Pin FineLine Ball-Grid Array (FBGA)—Flip Chip—Lidless
(HC335)”, “1152-Pin FineLine Ball-Grid Array (FBGA)—Flip Chip—
Lidless (HC335)”, “780-Pin FineLine Ball-Grid Array (FBGA)—Flip
Chip—Lidless (HC325)”, “484-Pin FineLine Ball-Grid Array (FBGA)—
Flip Chip—Lidless (HC4E25)”, “780-Pin FineLine Ball-Grid Array
(FBGA)—Flip Chip—Lidless (HC4E25)”, “780-Pin FineLine Ball-Grid
Array (FBGA)—Flip Chip—Lidless (HC4GX15)”, “780-Pin FineLine
Ball-Grid Array (FBGA)—Flip Chip—Lidless (HC4GX25)”, “1152-Pin
FineLine Ball-Grid Array (FBGA)—Flip Chip—Lidless (HC4GX25)”,
“1152-Pin FineLine Ball-Grid Array (FBGA)—Flip Chip—Lidless
(HC4GX35)”, and “1517-Pin FineLine Ball-Grid Array (FBGA)—Flip
Chip—Lidless (HC4GX35)”.
■
Revised the unit weight info for: “484-Pin FineLine Ball-Grid Array
(FBGA), Option 1—Flip Chip”, “484-Pin FineLine Ball-Grid Array
(FBGA), Option 4—Flip Chip”, “572-Pin FineLine Ball-Grid Array
(FBGA)—Option 1, Flip Chip”, “572-Pin FineLine Ball-Grid Array
(FBGA)—Option 2, Flip Chip”, “672-Pin FineLine Ball-Grid Array
(FBGA), Option 1—Flip Chip”, “672-Pin FineLine Ball-Grid Array
(FBGA), Option 4—Flip Chip”, “780-Pin FineLine Ball-Grid Array
(FBGA), Option 1—Flip Chip”, “780-Pin FineLine Ball-Grid Array
(FBGA), Option 3—Flip Chip”, “780-Pin FineLine Ball-Grid Array
(FBGA), Option 4—Flip Chip”“1020-Pin FineLine Ball-Grid Array
(FBGA), Option 1—Flip Chip”, and “1020-Pin FineLine Ball-Grid Array
(FBGA), Option 2—Flip Chip”.
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Additional Information
v
Table 60. Document Revision History (1) (Part 5 of 13)
Date and Document
Version
© December 2011
Changes Made
Summary of Changes
■
Revised the unit weight info for: “1152-Pin FineLine Ball-Grid Array
(FBGA), Option 1—Flip Chip”, “1152-Pin FineLine Ball-Grid Array
(FBGA), Option 2—Flip Chip”, “1152-Pin FineLine Ball-Grid Array
(FBGA), Option 3—Flip Chip”, “1508-Pin FineLine Ball-Grid Array
(FBGA), Option 1—Flip Chip”, “1508-Pin FineLine Ball-Grid Array
(FBGA), Option 2—Flip Chip”, “1517-Pin FineLine Ball-Grid Array
(FBGA), Option 1—Flip Chip”, “1517-Pin FineLine Ball-Grid Array
(FBGA), Option 2—Flip Chip”, “1760-Pin FineLine Ball-Grid Array
(FBGA), Option 1—Flip Chip”, “1760-Pin FineLine Ball-Grid Array
(FBGA), Option 2—Flip Chip”, “1932-Pin FineLine Ball-Grid Array
(FBGA), Option 1—Flip Chip”, “1932-Pin FineLine Ball-Grid Array
(FBGA), Option 2—Flip Chip”, “484-Pin Hybrid FineLine Ball-Grid
Array (HBGA)—Flip Chip”, “780-Pin Hybrid FineLine Ball-Grid Array
(HBGA)—Flip Chip”, “1517-Pin Hybrid FineLine Ball-Grid Array
(HBGA), Option 1—Flip Chip”, “1517-Pin Hybrid FineLine Ball-Grid
Array (HBGA), Option 2—Flip Chip”, “1152-Pin Hybrid FineLine BallGrid Array (HBGA), Option 1—Flip Chip”, “1152-Pin Hybrid FineLine
Ball-Grid Array (HBGA), Option 2—Flip Chip”, “1152-Pin Hybrid
FineLine Ball-Grid Array (HBGA), Option 3—Flip Chip”, and “1152-Pin
Hybrid FineLine Ball-Grid Array (HBGA), Option 4—Flip Chip”.
■
Added package diagram: “144-Pin Plastic Enhanced Quad Flat Pack
(EQFP)—Wire Bond (EP3C10)”, “148-Pin Quad Flat No-Lead Package
(QFN)—Wire Bond”, “780-Pin FineLine Ball-Grid Array (FBGA),
Option 4—Flip Chip”, “1152-Pin FineLine Ball-Grid Array (FBGA),
Option 3—Flip Chip”, and “572-Pin FineLine Ball-Grid Array
(FBGA)—Option 2, Flip Chip”.
■
Added package diagram for Stratix IV devices: “1152-Pin FineLine
Ball-Grid Array (FBGA)—Flip Chip—Single-Piece Lid (EP4SGX290)”,
“780-Pin FineLine Ball-Grid Array (FBGA)—Flip Chip—Single-Piece
Lid (EP4SGX110)”, “1152-Pin FineLine Ball-Grid Array (FBGA)—Flip
Chip—Single-Piece Lid (EP4SGX110)”, “1152-Pin FineLine Ball-Grid
Array (FBGA)—Flip Chip—Channel Lid (EP4SGX180)”,“1152-Pin
FineLine Ball-Grid Array (FBGA)—Flip Chip—Single-Piece Lid
(EP4SGX180)”, “1932-Pin FineLine Ball-Grid Array (FBGA)—Flip
Chip—Single-Piece Lid (EP4SGX290)”, “780-Pin Hybrid FineLine
Ball-Grid Array (HBGA)—Flip Chip—Channel Lid (EP4SGX360)”,
“1517-Pin FineLine Ball-Grid Array (FBGA)—Flip Chip—Single-Piece
Lid (EP4SGX360)”, “1760-Pin FineLine Ball-Grid Array (FBGA) — Flip
Chip — Single-Piece Lid (EP4SGX360)”, “1517-Pin Hybrid FineLine
Ball-Grid Array (HBGA)—Flip Chip—Dual-Piece Lid (EP4SE530)”,
“1517-Pin Hybrid FineLine Ball-Grid Array (HBGA)—Flip Chip—
Single-Piece Lid (EP4SE530)”, “780-Pin FineLine Ball-Grid Array
(FBGA)—Flip Chip—Channel Lid (EP4SE230)”, and “1152-Pin Hybrid
Ball-Grid Array (HBGA)—Flip Chip—Single-Piece Lid (EP4SE530)”.
Altera Corporation
Package Information Datasheet for Mature Altera Devices
vi
Package Information Datasheet for Mature Altera Devices
Additional Information
Table 60. Document Revision History (1) (Part 6 of 13)
Date and Document
Version
Changes Made
Summary of Changes
■
Added package diagram for Stratix III devices: “780-Pin FineLine BallGrid Array (FBGA)—Flip Chip—Dual-Piece Lid (EP3SL150)”, “780Pin Hybrid FineLine Ball-Grid Array (HBGA)—Flip Chip—Dual-Piece
Lid (EP3SL200)”,“1152-Pin FineLine Ball-Grid Array (FBGA)—Flip
Chip—Dual-Piece Lid (EP3SE110)”, “780-Pin FineLine Ball-Grid
Array (FBGA)—Flip Chip—Dual-Piece Lid (EP3SE110)”, “780-Pin
Hybrid FineLine Ball-Grid Array (HBGA)—Flip Chip—Dual-Piece Lid
(EP3SE260)”, “1152-Pin FineLine Ball-Grid Array (FBGA)—Flip
Chip—Channel Lid (EP3SE260)”, and “1152-Pin FineLine Ball-Grid
Array (FBGA)—Flip Chip—Dual-Piece Lid (EP3SE260)”.
■
Added package diagram for Cyclone IV devices: “780-Pin FineLine
Ball-Grid Array (FBGA)—Wire Bond—OMPAC (EP4CE115)”.
■
Added package diagram for Cyclone III devices :“780-Pin FineLine
Ball-Grid Array (FBGA)—Wire Bond—OMPAC (EP3C120)”, “144-Pin
Plastic Enhanced Quad Flat Pack (EQFP)—Wire Bond—
(EP3C16)”,“256-Pin Ultra FineLine Ball-Grid Array (UBGA)—Wire
Bond—Thin (EP3C10)”, “780-Pin FineLine Ball-Grid Array (FBGA)—
Wire Bond—OMPAC (EP3C55)”, “144-Pin Plastic Enhanced Quad
Flat Pack (EQFP)—Wire Bond—(EP3C25)”, “256-Pin FineLine BallGrid Array (FBGA)—Wire Bond—Thin (EP3C10)”, “780-Pin FineLine
Ball-Grid Array (FBGA)—Wire Bond—OMPAC (EP3C80)”,“484-Pin
FineLine Ball-Grid Array (FBGA)—Wire Bond—OMPAC (EP3C120)”,
“256-Pin FineLine Ball-Grid Array (FBGA)—Wire Bond—Thin
(EP3C16)”, “256-Pin FineLine Ball-Grid Array (FBGA)—Wire Bond—
Thin (EP3C25)”, “324-Pin FineLine Ball-Grid Array (FBGA)—Wire
Bond (EP3C25)”, “324-Pin FineLine Ball-Grid Array (FBGA)—Wire
Bond (EP3C40)”, “484-Pin FineLine Ball-Grid Array (FBGA)—Wire
Bond—OMPAC (EP3C16)”, “484-Pin FineLine Ball-Grid Array
(FBGA)—Wire Bond—OMPAC (EP3C40)”, “484-Pin FineLine BallGrid Array (FBGA)—Wire Bond—OMPAC (EP3C55)”, “484-Pin
FineLine Ball-Grid Array (FBGA)—Wire Bond—OMPAC (EP3C80)”,
“484-Pin Ultra FineLine Ball-Grid Array (UBGA)—Wire Bond
(EP3CLS100)”, “256-Pin Ultra FineLine Ball-Grid Array (UBGA)—
Wire Bond—Thin (EP3C16)”, “484-Pin Ultra FineLine Ball-Grid Array
(UBGA)—Wire Bond (EP3C16)”, “256-Pin Ultra FineLine Ball-Grid
Array (UBGA)—Wire Bond—Thin (EP3C25)”, “484-Pin Ultra FineLine
Ball-Grid Array (UBGA)—Wire Bond (EP3C55)”, and “484-Pin Ultra
FineLine Ball-Grid Array (UBGA)—Wire Bond (EP3C80)”.
■
Added package diagram for MAX II devices: “100-Pin FineLine BallGrid Array (FBGA)—Wire Bond—Thin (EPM240)”, “100-Pin FineLine
Ball-Grid Array (FBGA)—Wire Bond—Thin (EPM570)”.
■
Updated A3 dimension for “572-Pin FineLine Ball-Grid Array
(FBGA)—Lidless—Flip Chip (EP2AGX45)”, “572-Pin FineLine BallGrid Array (FBGA)—Lidless—Flip Chip (EP2AGX65)”, “780-Pin
FineLine Ball-Grid Array (FBGA)—Flip Chip—Lidless (EP2AGX45)”,
and “780-Pin FineLine Ball-Grid Array (FBGA)—Flip Chip—Lidless
(EP2AGX65)”.
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Additional Information
vii
Table 60. Document Revision History (1) (Part 7 of 13)
Date and Document
Version
© December 2011
Changes Made
Summary of Changes
■
Added package diagram for HardCopy III devices: “484-Pin FineLine
Ball-Grid Array (FBGA)—Flip Chip—Single-Piece Lid (HC325)” and
“484-Pin FineLine Ball-Grid Array (FBGA)—Flip Chip—Lidless
(HC325)”.
■
Updated D1/E1 values in “1517-Pin FineLine Ball-Grid Array
(FBGA)—Flip Chip—Single-Piece Lid (EP4S40G2)”, “1517-Pin
FineLine Ball-Grid Array (FBGA)—Flip Chip—Single-Piece Lid
(EP4S100G2)”, “1517-Pin FineLine Ball-Grid Array (FBGA)—Flip
Chip—Single-Piece Lid (EP4SGX180)”, “1517-Pin FineLine Ball-Grid
Array (FBGA)—Flip Chip—Single-Piece Lid (EP4SGX230)”, “484-Pin
FineLine Ball-Grid Array (FBGA)—Flip Chip—Lidless (HC4E25)”,
“780-Pin FineLine Ball-Grid Array (FBGA)—Flip Chip—Lidless
(HC4E25)”, and “1020-Pin FineLine Ball-Grid Array (FBGA), Option
2—Flip Chip”.
■
Updated Table 7.
■
Updated Table 10 footnote.
■
Updated thermal resistance values of EP3CLS70, EP3CLS100,
EP3CLS150, and EP3CLS200 devices F484 pin package in Table 42.
■
Updated package diagram in “1152-Pin FineLine Ball-Grid Array
(FBGA)—Flip Chip—Single-Piece Lid (EP4SGX360)”
■
Updated the notes in “256-Pin FineLine Ball-Grid Array (FBGA),
Option 1—Wire Bond” and “256-Pin FineLine Ball-Grid Array (FBGA),
Option 2—Thin—Wire Bond” to include Cyclone IV devices.
■
Updated EP4SE230 device package to Channel Lid from Dual-Piece
Lid in Table 4.
■
Updated package diagram in “1517-Pin FineLine Ball-Grid Array
(FBGA)—Flip Chip—Dual-Piece Lid (EP4SGX180)”.
■
Updated EP1AGX50 and EP1AGX60 F484 pin package description
from dual-piece lid to channel lid in Table 3.
■
Updated EP4SGX180 and EP4SGX230 device package description in
Table 4.
■
Added note 1 to Table 6.
■
Deleted HC315WF484 from Table 18.
■
Added additional information to “148-Pin Quad Flat No-Lead Package
(QFN)—Wire Bond—(EP4CGX15)” and “148-Pin Quad Flat No-Lead
Package (QFN)—Wire Bond”
Altera Corporation
Package Information Datasheet for Mature Altera Devices
viii
Package Information Datasheet for Mature Altera Devices
Additional Information
Table 60. Document Revision History (1) (Part 8 of 13)
Date and Document
Version
April 2010
Changes Made
Summary of Changes
Updated for version 16.1
■
Added Table 1 and Table 38
■
Updated Table 2 through Table 37
■
Updated values in Table 49, Table 50, Table 58
■
Removed 148-pin Quad Flat No-Lead Package (QFN)—Wire Bond,
484-Pin FBGA, Flip Chip, Dual-Piece Lid (EP2S15), 484-Pin FBGA,
Flip Chip, Single-Piece Lid (EP2S15), 672-Pin FBGA, Flip Chip, DualPiece Lid (EP2S15), 672-Pin FBGA, Flip Chip, Single-Piece Lid
(EP2S15) package outlines.
■
Corrected title in 1152-Pin FineLine Ball-Grid Array (FBGA)—Flip
Chip—Single-Piece Lid (HC4E35)
■
Added 148-Pin Quad Flat No-Lead Package (QFN)—Wire Bond—
(EP4CGX15)
■
Added 1517-Pin FineLine Ball-Grid Array (FBGA)—Flip Chip—SinglePiece Lid (EP4S40G2), 1517-Pin FineLine Ball-Grid Array (FBGA)—
Flip Chip—Single-Piece Lid (EP4S100G2), 1517-Pin Hybrid FineLine
Ball-Grid Array (HBGA)—Flip Chip—Single-Piece Lid (EP4S40G5),
and 1932-Pin FineLine Ball-Grid Array (FBGA)—Flip Chip—SinglePiece Lid (EP4S100G4)
■
Added 1152-Pin Hybrid Ball-Grid Array (HBGA)—Flip Chip—SinglePiece Lid (EP4SE820), 1517-Pin Hybrid Ball-Grid Array (HBGA)—Flip
Chip—Single-Piece Lid (EP4SE820), and 1760-Pin FineLine Ball-Grid
Array (FBGA)—Flip Chip—Single-Piece Lid (EP4SE820)
■
Added 1517-Pin FineLine Ball-Grid Array (FBGA)—Flip Chip—SinglePiece Lid (EP4SGX180) and 1517-Pin FineLine Ball-Grid Array
(FBGA)—Flip Chip—Dual-Piece Lid (EP4SGX180)
■
Added 1517-Pin FineLine Ball-Grid Array (FBGA)—Flip Chip—DualPiece Lid (EP4SGX230)
■
Added “484-Pin FineLine Ball-Grid Array (FBGA)—Flip Chip—Lidless
(HC4E25)”, “484-Pin FineLine Ball-Grid Array (FBGA)—Flip Chip—
Single-Piece Lid (HC4E25)”, and “780-Pin FineLine Ball-Grid Array
(FBGA)—Flip Chip—Lidless (HC4E25)”
■
Added “780-Pin FineLine Ball-Grid Array (FBGA)—Flip Chip—Lidless
(HC4GX15)”, and “780-Pin FineLine Ball-Grid Array (FBGA)—Flip
Chip—Single-Piece Lid (HC4GX15)”
■
Added “780-Pin FineLine Ball-Grid Array (FBGA)—Flip Chip—Lidless
(HC4GX25)”, “780-Pin FineLine Ball-Grid Array (FBGA)—Flip Chip—
Single-Piece Lid (HC4GX25)”, “1152-Pin FineLine Ball-Grid Array
(FBGA)—Flip Chip—Lidless (HC4GX25)”, and “1152-Pin FineLine
Ball-Grid Array (FBGA)—Flip Chip—Single-Piece Lid (HC4GX25)”
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Additional Information
ix
Table 60. Document Revision History (1) (Part 9 of 13)
Date and Document
Version
December 2009
© December 2011
Changes Made
Summary of Changes
■
Added “1152-Pin FineLine Ball-Grid Array (FBGA)—Flip Chip—
Single-Piece Lid (HC4GX35)”, “1517-Pin FineLine Ball-Grid Array
(FBGA)—Flip Chip—Lidless (HC4GX35)”, and “1517-Pin FineLine
Ball-Grid Array (FBGA)—Flip Chip—Single-Piece Lid (HC4GX35)”
■
Updated 1517-Pin FineLine Ball-Grid Array (FBGA)—Flip Chip—
Single-Piece Lid (EP4SGX230)
■
Corrected title for 324-Pin FineLine Ball-Grid Array (FBGA)—Wire
Bond—Option 1 from 324-Pin FineLine Ball-Grid Array (FBGA)
■
Corrected title for 1517-Pin Hybrid FineLine Ball-Grid Array (HBGA)
— Flip Chip — Single-Piece Lid (EP4SE820) from 1517-Pin Hybrid
FineLine Ball-Grid Array (HBGA)—Flip Chip—Single-Piece Lid
(EP4SGX820)
■
Corrected weight in 324-Pin FBGA Data Sheet
■
Added thermal resistance disclaimer at the beginning of the Thermal
Resistance section
■
Moved EPC1, EPC2, EPC1441 entries from Table 27 to Table 37
■
Added notes for preliminary thermal information (Table 36, Table 37,
Table 46, and Table 47)
Altera Corporation
Updated for version 16.0
Package Information Datasheet for Mature Altera Devices
x
Package Information Datasheet for Mature Altera Devices
Additional Information
Table 60. Document Revision History (1) (Part 10 of 13)
Date and Document
Version
November 2009
Changes Made
Summary of Changes
Updated for version 15.9
■
Added Cyclone IV information
■
Added notes to 1152-Pin HBGA Option 3 Data Sheet
■
Corrected drawings for 358-Pin UBGA—Lidless (EP2AGX45),
358-Pin UBGA—Lidless (EP2AGX65), and 1152-Pin FBGA—Lidless
(EP2AGX95) Data Sheets
■
Added 148-Pin QFN, 169-Pin FBGA, and 324-Pin FBGA Option 2 Data
Sheets
■
Added 1517-Pin—Lidless (HC4E35) and 1517-Pin Single-Piece Lid
(HC4E35) Data Sheets
■
Added 780-pin FBGA—Channel Lid (EP4SGX230), 780-Pin HBGA—
Channel Lid (EP4SGX 360), 1152-Pin FBGA—Channel Lid
(EP4SGX230), 1152-Pin FBGA—Channel Lid (EP4SGX360),
1152-Pin FBGA—Dual-Piece Lid (EP4SGX230), 1152-Pin FBGA—
Single-Piece Lid (EP4SGX230), 1152-Pin FBGA—Single-Piece Lid
(EP4SGX360), 1152-Pin HBGA—Single-Piece Lid (EP4SGX530),
1152-Pin HBGA—Single-Piece Lid (EP4SGX820), 1517-Pin FBGA—
Dual-Piece Lid (EP4SGX230),
1517-Pin FBGA—Single-Piece Lid (EP4SGX230), 1517-Pin FBGA—
Single-Piece Lid (EP4SGX360), 1517-Pin HBGA—Dual-Piece Lid
(EP4SGX530), 1517-Pin HBGA—Single-Piece Lid (EP4SGX530),
1517-Pin HBGA—Single-Piece Lid (EP4S40G2 and EP4S100G2),
1517-Pin HBGA—Single-Piece Lid (EP4S100G5), 1517-Pin HBGA—
Single-Piece Lid (EP4SGX820), 1760-Pin FBGA—Dual-Piece Lid
(EP4SGX530), 1760-Pin FBGA—Single-Piece Lid (EP4SGX360),
1760-Pin FBGA—Single-Piece Lid (EP4SGX820), 1932-Pin FBGA—
Dual-Piece Lid (EP4SGX530), 1932-Pin FBGA—Single-Piece Lid
(EP4SGX530), 1932-Pin FBGA—Single-Piece Lid (EP4S100G2) Data
Sheets
■
Added 484-Pin FBGA—Dual-Piece Lid (EP2S15), 484-Pin FBGA—
Single-Piece Lid (EP2S15), 672-Pin FBGA—Dual-Piece Lid (EP2S15),
672-Pin FBGA—Single-Piece Lid (EP2S15), 164-Pin MBGA
(EP3C16), and 484-Pin UBGA (EP3C40) Data Sheets
Package Information Datasheet for Mature Altera Devices
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Additional Information
xi
Table 60. Document Revision History (1) (Part 11 of 13)
Date and Document
Version
October 2009
June 2009
March 2009
© December 2011
Changes Made
Summary of Changes
■
Added 1152-Pin HBGA Option 3, 1152-Pin HBGA Option 4, 1517-Pin
HBGA Option 2, 1760-Pin FBGA Option 2, and 1932-Pin FBGA Option
2 Data Sheets
■
Added 358-Pin UBGA—Lidless (EP2AGX45), 358-Pin UBGA—Lidless
(EP2AGX65), 572-Pin FBGA—Lidless (EP2AGX45), 572-Pin FBGA—
Lidless (EP2AGX65), 572-Pin FBGA—Lidless (EP2AGX95), 572-Pin
FBGA—Lidless (EP2AGX125), 780-Pin FBGA—Lidless (EP2AGX45),
780-Pin FBGA—Lidless (EP2AGX65), 780-Pin FBGA—Lidless
(EP2AGX95), 780-Pin FBGA—Lidless (EP2AGX125), 780-Pin
FBGA—Lidless (EP2AGX190), 780-Pin FBGA—Lidless
(EP2AGX260), 1152-Pin FBGA—Lidless (EP2AGX95), 1152-Pin
FBGA—Lidless (EP2AGX125), 1152-Pin FBGA—Lidless
(EP2AGX190), and 1152-Pin FBGA—Lidless (EP2AGX260) Data
Sheets
■
Added 780-Pin FBGA—Lidless (HC325), 780-Pin FBGA—SinglePiece Lid (HC325), 1152-Pin FBGA—Lidless (HC335), 1152-Pin
FBGA—Single-Piece Lid (HC335), 1152-Pin FBGA—Lidless
(HC4E35), 1152-Pin FBGA—Single-Piece Lid (HC4E35), 1517-Pin
FBGA—Lidless (HC335), and 1517-Pin FBGA—Single-Piece Lid
(HC335) Data Sheets
■
Removed EP2AGX20 and EP2AGX30 entries from Table 2 and
Table 39
■
Added EP4SE820 entries to Table 41
■
Added Stratix IV GT devices to Table 4; added option references
■
Updated thermal resistance values in Table 39
■
Made three corrections to Stratix III thermal resistance table
■
Added Cyclone III LS information
■
Added Stratix IV GT thermal resistance values
■
Added and/or HardCopy III and IV cross-reference and thermal
resistance tables
■
Updated HardCopy III and IV part numbers
■
Added Cyclone III M164 package information
■
Added 484-Pin FBGA Option 4, 672-Pin FBGA Option 4, 1020-Pin
FBGA Option 2, 1508-Pin FBGA Option 2, and 1517-Pin Option 2
FBGA Data Sheets
■
Revised 1508-Pin FBGA Option 1, 1020-Pin FBGA Option 1, 1517-Pin
FBGA Option 1, 572-Pin FBGA, and 1152-Pin FBGA Option 2 Data
Sheets
■
Added 956-Pin BGA Option 2 Data Sheet
■
Corrected “b Nom.” value in 358-Pin UBGA Data Sheet
■
Corrected “A Max.” value and replaced package drawing in 780-Pin
FBGA - Option 3 Data Sheet
■
Corrected “A Max.” value in 256-Pin UBGA Data Sheet
■
Modified thermal resistance values for EP3SL200 device in Stratix III
thermal resistance table
Altera Corporation
Updated for version 15.8
Updated for version 15.7
Updated for version 15.6
Package Information Datasheet for Mature Altera Devices
xii
Package Information Datasheet for Mature Altera Devices
Additional Information
Table 60. Document Revision History (1) (Part 12 of 13)
Date and Document
Version
March 2009
Changes Made
Summary of Changes
■
Fixed theta symbols in several data sheet Dimension Tables
■
Updated dimensions in 256-Pin UBGA Data Sheet
■
Added 358-Pin UBGA Data Sheet, 572-Pin, 780-Pin Option 3, and
1152-Pin Option 2 FBGA Data Sheets
■
Added Arria II GX thermal resistance table
■
Added Arria II GX device and package cross-reference table
■
Added EP3SL50, EP3SE80, and EP3SL110 devices to Stratix III
thermal resistance table
■
Added EP4SGX70, EP4SGX180, and EP4SGX290 devices and
updated Stratix IV GX thermal resistance table
■
Added HardCopy III and HardCopy IV thermal resistance table
■
Miscellaneous formatting changes
December 2008
■
Changed dimension “A” Max. value in 1932-Pin FBGA Data Sheet
Updated for version 15.4
November 2008
■
Moved Revision History to the end and added “How to Contact Altera”
section
Updated for version 15.3
■
Added subheadings in Thermal Resistance section
■
Converted to 8-1/2 x 11 page size
■
Changed “Maximum Lead Coplanarity” to “Lead Coplanarity” and
added “(Typ.)” to weights for all packages
■
Added EP2C15 information to Cyclone II tables
■
Added thermal resistance values for Stratix IV
■
Added new 1152-Pin HBGA Option 2 (42.5 MM SQ.) Data Sheet
■
Added new 1517-Pin HBGA (42.5 MM SQ.) Data Sheet
■
Added theta-JB thermal resistance values for Stratix II
■
Added HardCopy II thermal resistance values
■
Revised weights for 256-Pin BGA Option 2, 652-Pin BGA Option 2,
652-Pin BGA Option 3, 208-Pin RQFP, 240-Pin RQFP, and 304-Pin
RQFP Data Sheets
■
Added notes to 1152-Pin FBGA, 1517-Pin FBGA, 1760-Pin FBGA;
changed dimension “A” thickness and “A2” thickness in 1932-Pin
FBGA Data Sheet
■
Added 1932-Pin FBGA Data Sheet
■
Added Device and Package Cross Reference table for Stratix IV
■
Revised Maximum Lead Coplanarity values for 1517-Pin FBGA and
1760-Pin FBGA Data Sheets
■
Added three entries to Table 3
■
Corrected minor typos in Table 4 and Table 10
■
Corrected HC210W package in Table 12
■
Many tables updated for formatting consistency
September 2008
May 2008
April 2008
Package Information Datasheet for Mature Altera Devices
Updated for version 15.5
Updated for version 15.2
Updated for version 15.1
Updated for version 15.0
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Additional Information
xiii
Table 60. Document Revision History (1) (Part 13 of 13)
Date and Document
Version
February 2008
October 2007
May 2007 v14.7
February 2007
v14.6
December 2006
v14.5
Changes Made
Summary of Changes
Updated for version 14.9
■
Added 164-Pin MBGA information in Table 8
■
Added HardCopy II device information in Table 12
■
Updated Stratix III thermal resistance values in Table 22
■
Added 164-Pin MBGA Data Sheet
■
Corrected 8-Pin SOIC Data Sheet (changed “B” to “b” in Package
Outline Dimension Table)
■
Corrected 68-Pin MBGA Data Sheet (changed “Inches” to
“Millimeters” in Package Outline Dimension Table)
■
Removed note from 100-Pin PQFP Option 1 Data Sheet
■
Removed 100-Pin PQFP Option 2 Data Sheet
■
Updated 88-Pin UBGA, 144-Pin EQFP, 256-Pin FBGA Option 1, 256Pin FBGA Option 2, 256-Pin UBGA, 1517-Pin FBGA, and 1760-Pin
FBGA Data Sheets
■
Added 780-Pin HBGA and 1152-Pin HBGA Data Sheets
■
Added Arria™ GX information
■
Added Cyclone III tables
■
Revised D2 and E2 dimensions for 144-Pin EQFP
■
Revised 100-Pin MBGA - Wire Bond and 256-Pin MBGA - Wire Bond
■
Added 780-Pin FBGA option 2 - Wire Bond,
256-Pin UBGA - Wire Bond, 68-Pin MBGA - Wire Bond, and 144-Pin
MBGA - Wire Bond
■
Updated 144-Pin Plastic Thin Quad Flat Pack (TQFP) Data Sheet to
correct title and ordering code reference
■
Added revision history
■
Table 2 was added for Stratix III Device and Package Cross-Reference Added Tables for
Stratix III, updated other
Tables 16, 17, and 18 were added for Stratix III Thermal Resistance
data sheets
information
■
Updated for version 14.8
Changes and additions as
described in “Changes
Made” section
■
1517-Pin FineLine Ball-Grid Array (FBGA) - Flip Chip data sheet was
added
■
1760-Pin FineLine Ball-Grid Array (FBGA) - Flip Chip data sheet was
added
■
"Wire Bond" and "Flip Chip" was added to title of each data sheet, as
appropriate
■
"BGA" was spelled out as "Ball-Grid Array" in all titles
■
Some package outline drawings were reformatted
■
Weights were updated for many packages
Revised one data sheet
(144-Pin Plastic Thin Quad
Flat Pack (TQFP) Data
Sheet), added revision
history
Note to Table 60:
(1) Formal revision history for this document began with version 14.5.
© December 2011
Altera Corporation
Package Information Datasheet for Mature Altera Devices
Additional Information
How to Contact Altera
For the most up-to-date information about Altera® products, see the following table.
Contact (Note 1)
Contact
Method
Address
Technical support
Website
www.altera.com/support
Technical training
Website
www.altera.com/training
Email
[email protected]
Altera literature services
Email
[email protected]
Non-technical support (General)
Email
[email protected]
(Software Licensing)
Email
[email protected]
Note:
(1) You can also contact your local Altera sales office or sales representative.
101 Innovation Drive
San Jose, CA 95134
www.altera.com
Technical Support
www.altera.com/support
Copyright © December 2011. Altera Corporation. All rights reserved. Altera, The Programmable Solutions Company,
the stylized Altera logo, specific device designations, and all other words and logos that are identified as trademarks
and/or service marks are, unless noted otherwise, the trademarks and service marks of Altera Corporation in the U.S.
and other countries. All other product or service names are the property of their respective holders. Altera products
are protected under numerous U.S. and foreign patents and pending applications, maskwork rights, and copyrights.
Altera warrants performance of its semiconductor products to current specifications in accordance with Altera's
standard warranty, but reserves the right to make changes to any products and services at any time without notice.
Altera assumes no responsibility or liability arising out of the application or use of any information,
product, or service described herein except as expressly agreed to in writing by Altera Corporation.
Altera customers are advised to obtain the latest version of device specifications before relying on any
published information and before placing orders for products or services.