OPA729 Series 10 Watt Light Bar on Anotherm Linear Heat Spreader OPA729 Series • • • • • • 10, 1 watt LEDs per strip, can be linked with other OPA729’s Mono-color per strip (Blue, Green, Red, Yellow, White) Two component beam angle options (120° or 40°) Power connected to either end Universal connector (Tyco 2-292173-2 mates with 173977-2) RoHS Compliant OPA729_ (120° Beam Angle) Product Photo Here OPA729_D (40° Beam Angle) The OPA729 Series are designed for areas where lighting intensity and reliability are essential. The light beam angles of 40° and 120° are ideal for illuminating small and medium size areas while requiring minimal space. A patented substrate is used to ensure the best heat dissipation of any light assembly in the industry. For custom colors and design contact your OPTEK representative. Electrical / Optical Characteristics: TA=25°C, IF=700mA Part Number Typical Forward Voltage (V) Luminous Flux (lm) OPA729Y 12.5 OPA729B Color Dominant Wavelength 350 Yellow 587 nm 18.0 90 Blue 470 nm OPA729G 18.0 480 Green 530 nm OPA729R 12.5 260 Red 625 nm OPA729W 18.0 480 White 6,500°K OPA729YD 12.5 350 Yellow 587 nm OPA729BD 18.0 90 Blue 470 nm OPA729GD 18.0 480 Green 530 nm OPA729RD 12.5 260 Red 625 nm OPA729WD 18.0 480 White 6,500°K 120° 40° See OVSP_BCR4 for component specifications See OVSP_4CR44 for component specifications OPA729_ OPA729_D + Voltage RoHS Beam Angle Ground DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A 04/06 Page 1 of 1