TOTAL POWER INT'L MSAU100 Series 1 Watt Ultra Miniature SMD DC/DC Converters with Single Output Key Features l Lead Frame Technology l CECC00802 Reflow l Wide Temperature Performance l I / O Isolation 1000VDC l Efficiency Up To 82% l MTBF > 2,000,000 Hours +Vo +Vin Bipolar Push-Pull Inverter -Vin -Vo Mechanical Configuration & Pin Connections 12.7 +/- 0.25 NA : Not available for electrical connection NA NA NA + Vo - Vin + Vin NA - Vo All dimensions in mm 8.0 +/- 0.1 11.0 +/- 0.2 0.7 +/- 0.1 6.5 +/- 0.1 Pin 1 1C 2.0 +/- 0.1 Seating Plane 6.7 +/- 0.1 2.54 +/- 0.1 7.62 +/- 0.1 0.50 S 7.0 +/- 0.1 0.25 +0 /- 0.15 9.0 +/- 0.2 0.30 0.20 1.20 0.90 TOTAL POWER INT'L Tel: 877-646-0900 Fax: 978-453-7395 Email: [email protected] http://www.total-power.com -1- +/- 5.00O TOTAL POWER INT'L MSAU100 Absolute Maximum Ratings Exceeding these values can damage the module.These are not continuous operating ratings. Parameter Input Surge Voltage ( 1000 mS ) Min. Max. Unit. 5VDC Input Models -0.7 9 VDC 12VDC Input Models -0.7 18 VDC --- 450 mW Internal Power Dissipation Environmental Specifications Parameter Conditions Min. Typ. Max. Unit Operating Temperature -25 --- +85 ] Storage Temperature -40 --- +125 ] --- --- 95 % Humidity Cooling Free-Air Convection Model Selection Guide Model Number Input voltage Output Voltage Output Current Output Current VDC VDC mA (Max.) mA (Min.) Input Current Max. Load mA (Typ.) MSAU101 5 200 4 MSAU102 9 110 2 MSAU103 5 (4.5 ~ 5.5) Input Current No Load mA (Typ.) Load Regulation Efficiency % (Max.) % (Typ.) 250 10 80 254 10 78 30 12 84 1.5 252 8 80 MSAU104 15 67 1 248 7 81 MSAU111 5 200 4 103 8 81 8 78 5 81 5 82 MSAU112 MSAU113 12 (10.8 ~ 13.2) MSAU114 9 110 2 106 12 84 1.5 104 15 67 1 102 15 Specifications typical at Ta=+25],resistive load,nominal input voltage,rated output current unless otherwise noted. General Specification Parameter Rated Isolation Voltage Isolation Resistance Isolation Capacitance Conditions Min. Typ. Max. Unit 60 Seconds 1000 --- --- VDC 500VDC 1000 --- --- M[ 100KHz,1V --- 40 100 pF 70 100 140 kHz Model Min. Typ. Max. Unit 5V Input Models 4.5 5 5.5 12V Input Models 10.8 12 13.2 ------ ------ 0.3 Switching Frequency Input Specifications Parameter Input Voltage Range Reverse Polarity Input Current Input Filter All Models Internal Capacitor TOTAL POWER INT'L Tel: 877-646-0900 Fax: 978-453-7395 Email: [email protected] http://www.total-power.com -2- VDC A TOTAL POWER INT'L MSAU100 Output Specifications Parameter Conditions Output Voltage Accuracy Line Regulation For Vin Change 1% Load Regulation Io=20% to 100% Typ. Max. Unit --- {1.0 {3.0 % --- {1.2 {1.5 % See Model Selection Guide Ripple & Noise (20MHz) Ripple & Noise (20MHz) Min. Over Line,Load & Temp. Ripple & Noise (20MHz) % --- 60 120 mV P-P --- --- 150 mV P-P --- --- 5 mV rms. Over Load 120 --- --- % Temperature Coefficient --- {0.01 {0.02 %/] Output Short Circuit 0.5 Second Max. Input Fuse Selection Guide 5V Input Models 12V Input Models 500mA Slow - Blow Type 200mA Slow - Blow Type Derating Curve Output Power % 100 100 80 80 60 60 40 40 O -5% / C 20 20 0 0 -25 -10 0 20 40 60 Ambient Temperature 80 100 125 O C Connecting Pin Patterns 7.62mm 1.7mm 10.8mm 2.54mm 1.0mm Min Typical Applications + +Vin Fuse DC Power Source - +Out Single Output DC / DC Converter -Vin Load -Out TOTAL POWER INT'L Tel: 877-646-0900 Fax: 978-453-7395 Email: [email protected] http://www.total-power.com -3- Output Power % TOTAL POWER INT'L MSAU100 Infra-Red Soldering 300 10S 280 Temperature ( OC ) 260 245 Max. 215 200 10S 180 Typ. 150 130 OC 40S Min. 100 2 OC / S 50 0 0 25 50 75 100 125 150 175 200 225 250 Time ( Seconds ) Vapour Phase Soldering with Pre-Heating 300 Temperature ( O C) 250 20...40S 215 200 Max. 180 Typ. 150 Max. 2 OC / S Forced Cooling External Preheating 100 50 Internal Preheating ( By Second Vapour ) 0 0 25 50 75 100 125 150 175 200 225 250 Time ( Seconds ) NOTE: 1. Specifications typical at Ta=+25],resistive load,nominal input voltage,rated output current unless otherwise noted. 2. Other input and output voltage may be available,Please contact factory. 3. Specifications subject to change without notice. TOTAL POWER INT'L Tel: 877-646-0900 Fax: 978-453-7395 Email: [email protected] http://www.total-power.com -4- TOTAL POWER INT'L MSAU100 Packaging Specifications Reel ( 500pcs per Reel ) 30.4 Max 2.0+1 / -0 0 330.0 Max 0 100.0 Min 0 13.00¡Ó0.25 All dimentions in mm Tape Sprocket hole 0 1.55 +0.1 / -0 4.00 2.00 Sprocket hole tolerance over any 10 pitches ¡Ó0.2 11.50 1.75 13.20 24.00¡Ó0.3 0 1.50 +0.25 / -0 All dimentions in mm XX.XX¡Ó0.1 11.60 7.20 16.00 Direction of Unreeling 0.4 +/- 0.05 0.30 TOTAL POWER INT'L Tel: 877-646-0900 Fax: 978-453-7395 Email: [email protected] http://www.total-power.com -5- TOTAL POWER INT'L MSAU100 Tube ( 25pcs per tube ) 14.5 7.2 7.3 8.6 10.4 0.5 +/- 0.1 Tube material: PVC 4.5 5.0 All dimensions in mm, +/- 0.25mm 346 +/-1.5 Packaging Details Packaging Style Quantity Tube 25 Tape and Reel to IEC 286-3 Specifications 500 TOTAL POWER INT'L Tel: 877-646-0900 Fax: 978-453-7395 Email: [email protected] http://www.total-power.com -6-