NPIM Shielded Power Inductors FEATURES • SHIELDED POWER INDUCTOR • HIGH TEMPERATURE (+150°C) • HIGH CURRENT AND LOW DCR • LOW NOISE GAPLESS CONSTRUCTION • AEC-Q200 QUALIFIED* CHARACTERISTICS (53 ~ 106) Case Code Inductance Range (μH) NPIM__A Series Designed for Automotive Applicatiions RoHS Compliant includes all homogeneous materials *See Part Number System for Details 63A 64A 75A 85A 105A 104AL 0.68, 1.0 10 4.7 ~ 48 2.5 ~ 47 2.5 ~ 22 0.68, 1.0 Operating Temperature Range -40°C ~ +150°C (Including Self-Heating) Inductance Tolerance ±20% (M) Operating Voltage** 35Vop max. **Please contact NIC for the operating voltage for individual items. Test Item High Temperature Endurance Heat Resistance Test Method & Conditions Temperature: 150°C ± 2°C (including self-heating) Applied current: DC 1.0A Duration: 2,000 hours Temperature: 150°C ± 2°C Duration: 2,000 hours Damp Heat (Loaded) Temperature/Humidity: 85°C ± 2°C/85%RH Applied current: DC 1.0A Duration: 2,000 hours Moisture Resistance Temperature/Humidity: 85°C ± 2°C/85%RH Duration: 2,000 hours Cold Resistance Specification Inductance: Within ±10% of initial value DC Resistance: Within ±5% of intial value Physical: Coils shall not have any abnormality in appearance and construction. Temperature: -40“C ± 2°C Duration: 2,000 hours Temperature: -40“C ± 2°C 10 min., 5 ~ 35°C 0 ~ 5min., 150°C ± 2°C 10 min. Duration: 2,000 cycles Frequency: Log sweep 10 ~ 55 ~ 10Hz/1 min. Vibration Resisitance Amplitude: 1.5mm max in 3 directions (2 hours each) No disconnection of coils or mechanical damage. Duration: 6 hours total *NPIM_A series meets the testing requirements of AEC-Q200 Table 5, contact NIC for test data. Thermal Shock PART NUMBER SYSTEM NPIM 75A 4R7 M TR Q Y F RoHS Compliant Q = AEC Q-200 Qualified TR = Tape & Reel Packaging Tolerance: M = 20% Inductance Value Code: First two characters are signficant figures, 3rd character is multiplier, "R" = decimal point Size Code Series "Y" denotes suitable for automotive equipment, sourced to special production and inspection at TS-16949 certified production site. ® 1 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS SUBJECT TO CHANGE www.SMTmagnetics.com NPIM Shielded Power Inductors NPIM__A Series DIMENSIONS (mm) Series NPIM63A A B C D E t F G H 6.5 ± 0.4 6.0 ± 0.4 3.0 max. 1.5 ± 0.4 3.0 ± 0.3 0.05 min. 2.8 10 3.6 NPIM64A 6.5 ± 0.4 6.0 ± 0.4 4.5 max. 1.5 ± 0.4 3.0 ± 0.3 0.05 min. 2.8 10 3.6 NPIM75A 7.5 ± 0.4 7.0 ± 0.4 5.4 max. 2.0 ref. 3.0 ± 0.3 0.10 min. 2.8 10 3.6 NPIM85A 8.5 ± 0.4 8.0 ± 0.4 5.4 max. 2.0 ref. 3.0 ± 0.3 0.1 min. 3.8 12.4 4.0 NPIM105A 10.7 ± 0.5 10.0 ± 0.4 5.4 max. 2.0 ref. 4.2 ± 0.3 0.1 min. 6.1 13.7 4.8 NPIM104AL 10.9 ± 0.6 10.0 ± 0.4 5.0 max. 1.8 ref. 7.3 ± 0.3 0.5 min. 6.5 13.9 7.9 A LAND PATTERN R68Y B Date Code Polarity Marking F E H D D G C t ® 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS SUBJECT TO CHANGE www.SMTmagnetics.com NPIM Shielded Power Inductors Part Number NPIM63AR68MTRQYF NPIM63A1R0MTRQYF NPIM__A Series STANDARD VALUES - CASE SIZE 63A (6.5 x 6.0 x 3.0mm) Inductance Value DC Resistance DC Current Irms (Amps)1 DC Current (µH) (mΩ) max. Condition A Condition B Isat (Amps)2 0.68 6.9 9.8 12.0 24.0 1.0 8.7 8.8 10.7 20.0 Test Frequency 100KHz, 1Vrms Note 1 - DC Current (Irms) is current which causes a maximum temperature rise of 40°C: Condition A = 4-layer PWB (1.6t, FR4) Condition B = PWB with high dissipation performance, heat radiation constant is approximately 44K/W measured for 6.5mm x 6.0mm x 3.0mm case size. Note 2 - DC Current (Isat) is current which causes a decrease in inductance of 30%. Note 3 - Highest operating temperature should be within +150°C including temperature rise due to self-heating. Inductance vs. DC Current Inductance vs. DC Current NPIM63A1R0MTRQYF Inductance (mH) Inductance (mH) NPIM63AR68MTRQYF IDC (Amps) IDC (Amps) Temperature vs. DC Current NPIM63A1R0MTRQYF D Temperautre (°C) D Temperautre (°C) Temperature vs. DC Current NPIM63AR68MTRQYF PWB condition A PWB condition B PWB condition A PWB condition B IDC (Amps) IDC (Amps) ® 3 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS SUBJECT TO CHANGE www.SMTmagnetics.com NPIM Shielded Power Inductors NPIM__A Series STANDARD VALUES - CASE SIZE 64A (6.5 x 6.0 x 4.5mm) Inductance Value DC Resistance DC Current Irms (Amps)1 DC Current Test Frequency (µH) (mΩ) max. Condition A Condition B Isat (Amps)2 NPIM64A100MTRQYF 10 59.6 3.6 4.5 8.3 100KHz, 1Vrms Part Number Note 1 - DC Current (Irms) is current which causes a maximum temperature rise of 40°C: Condition A = 4-layer PWB (1.6t, FR4) Condition B = PWB with high dissipation performance, heat radiation constant is approximately 37K/W measured for 6.5mm x 6.0mm x 4.5mm case size. Note 2 - DC Current (Isat) is current which causes a decrease in inductance of 30%. Note 3 - Highest operating temperature should be within +150°C including temperature rise due to self-heating. Inductance vs. DC Current Temperature vs. DC Current NPIM64A100MTRQYF Inductance (mH) D Temperautre (°C) NPIM64A100MTRQYF PWB condition A PWB condition B IDC (Amps) IDC (Amps) ® 4 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS SUBJECT TO CHANGE www.SMTmagnetics.com NPIM Shielded Power Inductors Part Number NPIM75A4R7MTRQYF NPIM__A Series STANDARD VALUES - CASE SIZE 75A (7.5 x 7.0 x 5.4mm) Inductance Value DC Resistance DC Current Irms (Amps)1 DC Current (µH) (mΩ) max. Condition A Condition B Isat (Amps)2 4.7 23 6.3 8.0 13.1 NPIM75A220MTRQYF 22 102 3.0 3.7 5.8 NPIM75A330MTRQYF 33 132 2.6 3.3 4.8 Test Frequency 100KHz, 1Vrms NPIM75A470MTRQYF 47 172 2.3 2.9 4.1 Note 1 - DC Current (Irms) is current which causes a maximum temperature rise of 40°C: Condition A = 4-layer PWB (1.6t, FR4) Condition B = PWB with high dissipation performance, heat radiation constant is approximately 31K/W measured for 7.5mm x 7.0mm x 5.4mm case size. Note 2 - DC Current (Isat) is current which causes a decrease in inductance of 30%. Note 3 - Highest operating temperature should be within +150°C including temperature rise due to self-heating. Inductance vs. DC Current Inductance vs. DC Current Inductance (mH) NPIM75A220MTRQYF Inductance (mH) NPIM75A4R7MTRQYF IDC (Amps) IDC (Amps) Inductance vs. DC Current NPIM75A470MTRQYF Inductance (mH) Inductance (mH) Inductance vs. DC Current NPIM75A330MTRQYF IDC (Amps) IDC (Amps) ® 5 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS SUBJECT TO CHANGE www.SMTmagnetics.com NPIM__A Series Temperature vs. DC Current Temperature vs. DC Current NPIM75A4R7MTRQYF NPIM75A220MTRQYF PWB condition A PWB condition A D Temperautre (°C) D Temperautre (°C) NPIM Shielded Power Inductors PWB condition B PWB condition B IDC (Amps) IDC (Amps) Temperature vs. DC Current Temperature vs. DC Current NPIM75A330MTRQYF NPIM75A470MTRQYF PWB condition A D Temperautre (°C) D Temperautre (°C) PWB condition A PWB condition B PWB condition B IDC (Amps) IDC (Amps) ® 6 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS SUBJECT TO CHANGE www.SMTmagnetics.com NPIM Shielded Power Inductors Part Number NPIM85A2R5MTRQYF NPIM__A Series STANDARD VALUES - CASE SIZE 85A ( 8.5 x 8.0 x 5.4mm) Inductance Value DC Resistance DC Current Irms (Amps)1 DC Current (µH) (mΩ) max. Condition A Condition B Isat (Amps)2 2.5 8.49 11.9 14.0 20.1 NPIM85A100MTRQYF 10 37 5.7 6.7 13.0 NPIM85A220MTRQYF 22 70 4.1 4.8 6.9 NPIM85A470MTRQYF 47 138 2.9 3.4 5.4 Test Frequency 100KHz, 1Vrms Note 1 - DC Current (Irms) is current which causes a maximum temperature rise of 40°C: Condition A = 4-layer PWB (1.6t, FR4) Condition B = PWB with high dissipation performance, heat radiation constant is approximately 27K/W measured for 8.5mm x 8.0mm x 5.4mm case size. Note 2 - DC Current (Isat) is current which causes a decrease in inductance of 30%. Note 3 - Highest operating temperature should be within +150°C including temperature rise due to self-heating. Inductance vs. DC Current NPIM85A470MTRQYF Inductance (mH) Inductance (mH) Inductance vs. DC Current NPIM85A100MTRQYF IDC (Amps) Temperature vs. DC Current NPIM85A470MTRQYF PWB condition A PWB condition A D Temperautre (°C) D Temperautre (°C) IDC (Amps) Temperature vs. DC Current NPIM85A100MTRQYF PWB condition B PWB condition B IDC (Amps) IDC (Amps) ® 7 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS SUBJECT TO CHANGE www.SMTmagnetics.com NPIM Shielded Power Inductors Part Number NPIM105A2R5MTRQYF NPIM__A Series STANDARD VALUES - CASE SIZE 105A ( 10.7 x 10.0 x 5.4mm) Inductance Value DC Resistance DC Current Irms (Amps)1 DC Current Test (µH) (mΩ) max. Frequency Condition A Condition B Isat (Amps)2 2.5 5.9 15.1 18.1 27.2 NPIM105A3R3MTRQYF 3.3 7.9 13.1 15.7 22.7 NPIM105A4R7MTRQYF 4.7 11.3 10.9 13.1 20.0 NPIM105A100MTRQYF 10 26.2 7.1 8.5 10.7 NPIM105A220MTRQYF 22 50 5.2 6.2 3.0 100KHz, 1Vrms Note 1 - DC Current (Irms) is current which causes a maximum temperature rise of 40°C: Condition A = 4-layer PWB (1.6t, FR4) Condition B = PWB with high dissipation performance, heat radiation constant is approximately 23K/W measured for 10.7mm x 10.0mm x 5.4mm case size. Note 2 - DC Current (Isat) is current which causes a decrease in inductance of 30%. Note 3 - Highest operating temperature should be within +150°C including temperature rise due to self-heating. Inductance vs. DC Current NPIM105A4R7MTRQYF Inductance (mH) Inductance (mH) Inductance vs. DC Current NPIM105A2R5MTRQYF IDC (Amps) IDC (Amps) Temperature vs. DC Current NPIM105A4R7MTRQYF PWB condition A PWB condition A D Temperautre (°C) D Temperautre (°C) Temperature vs. DC Current NPIM105A2R5MTRQYF PWB condition B PWB condition B IDC (Amps) IDC (Amps) ® 8 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS SUBJECT TO CHANGE www.SMTmagnetics.com NPIM Shielded Power Inductors NPIM__A Series STANDARD VALUES - CASE SIZE 104AL (10.9 x 10.0 x 5.0mm) Inductance Value DC Resistance DC Current Irms (Amps)1 DC Current Test (µH) (mΩ) Frequency Condition A Condition B Isat (Amps)2 NPIM104ALR68MTRQYF 0.68 1.93 max. 26.3 31.5 42.0 100KHz, 1Vrms NPIM104AL1R0MTRQYF 1.0 2.3 typ. 23.0 34.0 Part Number Note 1 - DC Current (Irms) is current which causes a maximum temperature rise of 40°C: Condition A = 4-layer PWB (1.6t, FR4) Condition B = PWB with high dissipation performance, heat radiation constant is approximately 23K/W measured for 10.9mm x 10.0mm x 5.0mm case size. Note 2 - DC Current (Isat) is current which causes a decrease in inductance of 30%. Note 3 - Highest operating temperature should be within +150°C including temperature rise due to self-heating. Inductance vs. DC Current Inductance (mH) NPIM104ALR68MTRQYF IDC (Amps) D Temperautre (°C) Temperature vs. DC Current NPIM104ALR68TRQYF PWB condition A PWB condition B IDC (Amps) ® 9 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS SUBJECT TO CHANGE www.SMTmagnetics.com NPIM Shielded Power Inductors NPIM__A Series CARRIER TAPE DIMENSIONS (mm) Series NPIM63A Part Thickness Ao Bo 3.0 7.1 6.6 NPIM64A 4.5 7.1 6.6 NPIM75A 5.4 8.1 7.6 NPIM85A 5.4 9.1 8.6 NPIM105A 5.4 10.7 11.9 NPIM104AL 5.0 10.7 11.9 Co Po Ko t W 0.4 16.0 0.5 24.0 3.3 7.5 12.0 5.0 6.0 11.5 16.0 6.3 COMPONENT ORIENTATION (NPIM63A, 64A, 75A and 85A) 1.75mm ±0.1 Po 4.0mm ±0.1 1.50mm ± 0.05 t Co W Bo Ko Ao FEED DIRECTION COMPONENT ORIENTATION (NPIM105A and 104AL) 1.75mm ±0.1 Po 4.0mm ±0.1 1.50mm ± 0.05 t Co W Bo Ko Ao FEED DIRECTION ® 10 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS SUBJECT TO CHANGE www.SMTmagnetics.com NPIM Shielded Power Inductors NPIM__A Series REEL QUANTITY Series Qty/Reel NPIM63A 1,000 NPIM64A 500 NPIM75A 500 NPIM85A 500 NPIM105A 500 NPIM104AL 500 2.0mm φ 13.0mm 330mm 100mm φ 21.0mm 53A ~ 85A = 17.5mm 105A ~ 106AL = 25.5mm REFLOW SOLDERING PROFILE Temperature °C 300 Soldering 250°C max. 5 seconds max. 250 200 Time above 230°C 40 seconds max. Pre-Heat 160°C ±10°C 150 Cool Down 120 sec. max. 100 50 25 ® 11 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS SUBJECT TO CHANGE www.SMTmagnetics.com