Data Sheet: F-xASI/SDI-Tx/Rx The F-xASI/SDI is a copper to fiber media adapter for either DVB-ASI or SD-SDI signals. The unit has up to eight channels that work independently of each other. Each channel can carry either a DVB-ASI signal or an SD-SDI signal. Up to eight channels are then multiplexed onto a single fiber for transport. Our units employ CWDM technology for optical multiplexing. Based on users needs a variety of wavelenghts can be used for the transmitter optics. All transmittion signals are multiplexed onto a single fiber for transport. The signals are then separated at the receiver. The F-xASI/SDI provides up to 8 independent DVB-ASI/SDI pipes. There are BNC connectors for the copper inputs and outputs. The optical connections can be configured for SC, SC(APC), ST, or FC connectors. The F-xASI/SDI features easy to read diagnostic LED's for system and link status. Typical L-xASI/SDI-Rx/Tx Application Up to 120Km Singlemode Fiber ASI or SDI Out ASI or SDI In Technical Specifications Applications: Optical Wavelength Optical Output Power Optical Budget loss Optical Return Loss SMPTE 259M, SDI or D1 SMPTE 31 OM, MPEG2 SMPTE 305 540 Mbps HDTV Video On Demand TS MPEG Encoder DVB-ASI ASI 0.5Mbps – 622Mbps 1310 – 1550 nm FP/DFB 6.0 dbm 24 – 32 dB 40 dB Power Consumption Power Connection Optical Connector Copper Connections Dimensions (H x W x D) Weight Operating Temp. (Ԩ) Storage Temp. (Ԩ) Operating Humidity (%) Storage Humidity (%) Regulatory Compliance 8W 110-240 V Auto Sense SC/APC or by request BNC, 75 ohm 19in x 11.0in x 1.75in 480mmX225mmX44mm 0.75 Kg 0 to +50 (Ԩ) -20 to +70 (Ԩ) 0 to 90 % 0 to 90 % FCC Part 15 Class A CE, UL, CUL, TUV Data Sheet: F-xASI/SDI-Tx/Rx www.thorfiber.com