FREQUENCY DOUBLERS FD Series 5 to 3000 M Hz/M inimum SpuriousOutput/Flatpack orTO-5 orSM A Connectors PRINCIPAL SPECIFICATIONS † Input Freq., MHz Operating Input Frequency, MHz 75 - 1500 75 - 300 300 - 700 700 - 1500 11 11 11 14 14 14 – 50 – 40 – 35 – 50 – 45 – 40 5 - 500 5 - 100 100 - 300 300 - 500 12 12 15 16 15 17 – 40 – 30 – 30 – 45 – 40 – 40 25 - 3000 25 - 600 600 - 2500 2500 - 3000 12 12 13 14 13 15.5 –27 –18 –15 –30 –30 –20 FDM-500A 5 - 500 5 - 100 100 - 300 300 - 500 12 12 15 16 15 17 – 40 – 35 – 30 – 45 – 40 – 40 FDT-500A 5 - 500 5 - 100 100 - 300 300 - 500 10 10 11 13 13 15 – 40 – 35 – 30 – 45 – 40 – 40 Model Number FDF-4C-750 FDF-500A FDF-4A-1500 † Conversion Loss, dB, Typ. Max. *Typical Harmonic Output RF Input F3 F4 Range Package F1 dB dB dB (Nom.) Style +7 to 16 (13 dBm) Flat +5 to 18 (13 dBm) Flat +7 to 16 (13 dBm) Flat – 25 – 27 – 30 +5 to 18 (13 dBm) SMA – 25 – 27 – 30 +2 to 13 (9 dBm) TO-5 – 25 – 27 – 30 Conversion Loss measured at nominal Input Power *Typical Harmonic Level is referenced to RF Input Power All specifications measured at nominal input power and referenced to input power. Typical FDM-500A Performance GENERAL SPECIFICATIONS Impedance: 50 Ω nom. Weight, FDM-500A 0.65 oz. (2.5 g) Weight, All others: 0.09 oz. (18 g) Operating Temperature: – 55° to +85°C General Notes: 1. Merrimac Frequency Doublers cover the frequency range of 5 to 3000 MHz using lumped element circuits for broad bandwidth and excellent rejection of fundamental and third harmonic energy. These units may also act as quadruplers with additional conversion loss. 2. Merrimac Frequency Doublers comply with the relevant sections of MIL-M-28837 and may be supplied screened for compliance with additional specifications for military and space specifications requiring the highest reliability. 23Feb96 ForfurtherinformationcontactM ERRIM AC /41 Fairfield Pl.,W estCaldwell,NJ,07006 / 973-575-1300 /FAX 973-575-0531 FD Series FREQUENCY DOUBLERS 5 to 3000 MHz / Minimum Spurious Output / Flatpack or TO-5 or SMA Connectors Package Outline FDF-4C-750 Package Outline FDF-500A Package Outline FDF-4A-1500 Package Outline FDT Series Package Outline FDM Series NOTES: 1. Tolerance on 3 place decimals ±.010(.25) except as noted. 2. Dimensions in inches over millimeters. 3. Dimensions marked with * apply only at body. 4. All unmarked pins are case ground. 23Feb96 For additional information contact MERRIMAC, 41 Fairfield Pl., West Caldwell, NJ, 07006 973-575-1300 / FAX 973-575-0531