Click on Series name for product info on aimtec.com Series AM6GH-Z 6 Watt | DC-DC Converter FEATURES: • SIP8 Package • High Efficiency up to 87% • On / Off Control • No Minimum Load • • • • Operating Temperature -40°C to +85°C Continuous Short Circuit Protection Input / Output Isolation 1500 & 3000 VDC Wide 4:1 Input Range Models Single Output Input Voltage (V) Output Voltage (V) Output Current Max (mA) Isolation (VDC) AM6GH-2403SZ AM6GH-2405SZ AM6GH-2409SZ AM6GH-2412SZ AM6GH-2415SZ AM6GH-2424SZ AM6GH-4803SZ AM6GH-4805SZ AM6GH-4809SZ AM6GH-4812SZ AM6GH-4815SZ AM6GH-4824SZ 9-36 9-36 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 18-75 18-75 3.3 5 9 12 15 24 3.3 5 9 12 15 24 1500 1200 666 500 400 250 1500 1200 666 500 400 250 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 261 298 290 287 287 287 131 151 147 144 144 144 AM6GH-2403SH30Z AM6GH-2405SH30Z AM6GH-2409SH30Z AM6GH-2412SH30Z AM6GH-2415SH30Z AM6GH-2424SH30Z AM6GH-4803SH30Z AM6GH-4805SH30Z AM6GH-4809SH30Z AM6GH-4812SH30Z AM6GH-4815SH30Z AM6GH-4824SH30Z 9-36 9-36 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 18-75 18-75 3.3 5 9 12 15 24 3.3 5 9 12 15 24 1500 1200 666 500 400 250 1500 1200 666 500 400 250 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 261 298 290 287 287 287 131 151 147 144 144 144 Input Voltage (V) Output Voltage (V) Output Current Max (mA) Isolation (VDC) 9-36 9-36 9-36 18-75 18-75 18-75 ±5 ±12 ±15 ±5 ±12 ±15 ±600 ±250 ±200 ±600 ±250 ±200 1500 1500 1500 1500 1500 1500 Model Input Current Full | No Load (mA) Capacitor Load (μF) Efficiency (%) 6 6 6 6 6 6 6 6 6 6 6 6 4700 2200 1000 470 220 100 4700 2200 1000 470 220 100 79 84 86 87 87 87 79 83 85 87 87 87 6 6 6 6 6 6 6 6 6 6 6 6 4700 2200 1000 470 220 100 4700 2200 1000 470 220 100 79 84 86 87 87 87 79 83 85 87 87 87 Capacitor Load (μF) Efficiency (%) ±330 ±220 ±100 ±330 ±220 ±100 84 86 87 82 85 86 Models Dual output Model AM6GH-2405DZ AM6GH-2412DZ AM6GH-2415DZ AM6GH-4805DZ AM6GH-4812DZ AM6GH-4815DZ Input Current Full | No Load (mA) 298 291 287 152 147 145 6 6 6 6 6 6 AM6GH-2405DH30Z 9-36 ±5 ±600 3000 298 6 ±330 84 AM6GH-2412DH30Z 9-36 ±12 ±250 3000 291 6 ±220 86 AM6GH-2415DH30Z 9-36 ±15 ±200 3000 287 6 ±100 87 AM6GH-4805DH30Z 18-75 ±5 ±600 3000 152 6 ±330 82 AM6GH-4812DH30Z 18-75 ±12 ±250 3000 147 6 ±220 85 AM6GH-4815DH30Z 18-75 ±15 ±200 3000 145 6 ±100 86 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified www.aimtec.com F 051e R11.B Tel: +1 514 620 2722 1 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM6GH-Z 6 Watt | DC-DC Converter Input Specifications Parameters Nominal Typical 24 48 Voltage range Filter Transient recovery time Transient Response deviation Maximum VDC µs ±3 ±5 3.3 & 5 V output Start up time % 30 -0.7-50 -0.7-100 24 Vin 48 Vin Absolute Maximum Rating Units 9-36 18-75 Capacitor 250 ms VDC ON – high impedance or open; OFF – 2-4mA input current through 1KΩ (standby 2.5mA max) 24Vin 20 48Vin 40 On / Off Control Input reflected ripple current* mA p-p * The input reflected ripple current should be measured with connected 12μH inductor and 47μF input capacitor (ESR<1Ω at 100 KHz) Isolation Specifications Parameters Conditions Tested I/O voltage Resistance Capacitance Typical 3 sec Rated Units 1500 & 3000 VDC MOhm pF Maximum Units > 1000 50 Output Specifications Parameters Conditions Typical Voltage accuracy st Cross Regulation (Dual) Short Circuit protection Short Circuit restart Line voltage regulation Load voltage regulation Temperature coefficient Ripple & Noise 1 output 25% to 100%, 2 output 100% ±1 % ±5 % nd Continuous Auto recovery ±0.2 ±0.5 ±1.0 ±0.02 125 LL~HL (0 to 100% load) Single (0 to 100% load) 3V, 5V, & Dual At 20MHz Bandwidth % % o %/ C mV p-p General Specifications Parameters Switching frequency Operating temperature Storage temperature Max Case temperature Cooling Humidity Case material Potting material Pin Material Weight Dimensions (L X W X H) MTBF www.aimtec.com F 051e R11.B Conditions Typical 100% load Derating Chart at +71 580 Maximum Units +100 KHz o C o C o C -40 to +85 -55 to +125 Free air convection 95 Non-conductive black plastic epoxy (UL94V-0 rated) C5191R-H Solder coated 4.8 0.86 x 0.36 x 0.44 inch 21.85 x 9.20 x 11.10 mm o >TBD hrs (MIL-HDBK -217F, Ground Benign, t=+25 C) Tel: +1 514 620 2722 2 of 5 % g Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM6GH-Z 6 Watt | DC-DC Converter Safety Specifications Parameters Agency Approvals CE EN55022 Class A, EN55024 (external class A circuit required) IEC61000-4-2, Perf. Criteria A IEC61000-4-3, Perf. Criteria A IEC61000-4-4, Perf. Criteria A (external EFT/Surge circuit required) IEC61000-4-5, Perf. Criteria A (external EFT/Surge circuit required) IEC61000-4-6, Perf. Criteria A IEC61000-4-8, Perf. Criteria A NOTE: designed to meet IEC 60950-1:2001 Standards Pin Out Specifications Pin 1 2 3 5 6 7 8 1500 VDC 3000 VDC Single Dual Single Dual - V Input + V Input On/Off Control N.C. + V Output - V Output N.C. - V Input + V Input On/Off Control N.C. + V Output Common - V Output - V Input + V Input On/Off Control No Pin + V Output - V Output N.C. - V Input + V Input On/Off Control No Pin + V Output Common - V Output Dimensions 21.85 (0.85) 9.20 (0.36) PRINTED FACE 10.60 (0.44) 11.10 (0.44) 0.50 (0.02) 3.05 (0.12) 2.54 (0.10) 17.78 (0.70) 0.50 (0.02) 9.20 (0.38) 0.25 (0.01) 0.50 (0.02) 3.20 (0.13) Input Reflected Ripple Test Circuit Test Point + Cin 47µF - Vo+ Aimtec DC-DC Converter RL (Full Load) Lin 12µH Vo- * Tested at full load, and nominal input www.aimtec.com F 051e R11.B Tel: +1 514 620 2722 3 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM6GH-Z 6 Watt | DC-DC Converter Derating Output Power ( % ) Free Air Convection 71C 100 80 60 Safe Operating Area 50 40 20 71 0 85 - 40 - 20 0 20 40 60 80 100 Ambient Temperature º C Class A EMI, external filter C6 C3 L 12uH +V output +V input DC/DC Converter C1 Load C2 -V input -V output C4 C5 Vin 24VDC 48VDC C1 & C2 10µF/35V, MLCC 2.2µF/100V, MLCC www.aimtec.com F 051e R11.B C3 & C4 470pF/3KV, MLCC 1000pF/3KV, MLCC C5 & C6 1000pF/3KV, MLCC Tel: +1 514 620 2722 4 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM6GH-Z 6 Watt | DC-DC Converter EFT/Surge Application circuit +Vout +Vin DC/DC Converter C1 D1 Load -Vin -Vout Vin 24VDC 48VDC C1 300µF/100V 470µF/100V D1 TVS, 3kW, 75V TVS, 3kW, 130V Recommended circuit for class B compliance CY2 1nF/3KV L 15µH LCM 1mH +V output +V input C1 4.7µF/ 100V DC/DC Converter C2 4.7µF/ 100V -V input Load -V output CY1 1nF/3KV NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R11.B Tel: +1 514 620 2722 5 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only