General Power Transformer <SMD Type: CMD Series> Type: CMD-6LNL ◆ Product Description ・6.5×6.5mm Max.(L×W), 3.5mm Max. Height. ・Inductance range: 10μH～820μH ・Rated current range: 0.1A～0.86A. ・7 Terminal pins’ type gives a flexible design as inductors or transformers. ・Custom design is available. ◆ Feature ・Magnetically unshielded construction. ・Ideally used in portable devices such as DSC/DVC,PDA, Power supply module etc as DC-DC Converter inductors or transformers. ・RoHS Compliance ◆ Land Pattern (mm) ±0.2 2.25 1.5 1.5 1.5 ±0.2 2.25 2.25 8.2±0.5 2.0 1.0 1.0 3.5 MAX. 1.5 6.0±0.5 7.35 4.5 6.0±0.5 6.5±0.5 0.5±0.1 ◆ Dimensions (mm) 2.0 ◆ Specification (for transformers) Sample No. Inductance (1-3) 1kHz/1V 6314-T098 170µH ± 10% D.C.R. (1-3) 600mΩ Max. ※ Schematics (Bottom) “Ｓ”is winding start. 3 4 Ｓ 5 Ｓ Ｓ 2 6 Ｓ 1 7 Please refer to the sales offices on our website for a representative near you www.sumida.com 1/2 General Power Transformer <SMD Type: CMD Series> Type: CMD-6LNL ◆ Specification (for inductors) Stamp Inductance ［Within］ D.C.R.(Ω) [Max.] (at 20℃) Rate Current (mA)※2 CMD6LNLNP-100M□ 100M 10μH ± 20% 0.17 860 CMD6LNLNP-120M□ 120M 12μH ± 20% 0.21 800 CMD6LNLNP-150M□ 150M 15μH ± 20% 0.24 780 CMD6LNLNP-180M□ 180M 18μH ± 20% 0.28 770 CMD6LNLNP-220K□ 220K 22μH ± 10% 0.31 760 CMD6LNLNP-270K□ 270K 27μH ± 10% 0.41 540 CMD6LNLNP-330K□ 330K 33μH ±10% 0.48 520 CMD6LNLNP-390K□ 390K 39μH ±10% 0.53 500 CMD6LNLNP-470K□ 470K 47μH ±10% 0.66 450 CMD6LNLNP-560K□ 560K 56μH ±10% 0.81 370 CMD6LNLNP-680K□ 680K 68μH ±10% 0.99 360 CMD6LNLNP-820K□ 820K 82μH ±10% 1.15 340 CMD6LNLNP-101K□ 101K 100μH ±10% 1.45 290 CMD6LNLNP-121K□ 121K 120μH ±10% 1.65 280 CMD6LNLNP-151K□ 151K 150μH ±10% 1.95 270 CMD6LNLNP-181K□ 181K 180μH ±10% 2.3 260 CMD6LNLNP-221K□ 221K 220μH ±10% 3.0 200 CMD6LNLNP-271K□ 271K 270μH ±10% 3.9 190 CMD6LNLNP-331K□ 331K 330μH ±10% 4.6 185 CMD6LNLNP-391K□ 391K 390μH ±10% 6.2 155 CMD6LNLNP-471K□ 471K 470μH ±10% 7.2 150 CMD6LNLNP-561K□ 561K 560μH ±10% 8.75 145 CMD6LNLNP-681K□ 681K 680μH ±10% 11.0 105 CMD6LNLNP-821K□ 821K 820μH ±10% 13.0 100 Part Name ※ ※ Description of part name ※ Schematics (Bottom) CMD6LNLNP-100M□ “ S” is winding start. B Box C Carrier Tape Measuring Frequency 2.52MHz 1kHz 3 4 5 S 2 1 6 7 ※1. Rated current: The D.C. current at which the inductance decreases to 90% of it’s initial value or when △t=40℃, whichever is lower(Ta=20℃). Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2