FCI FR5002 50 amp plastic silicon automotive rectifier Datasheet

50 Amp PLASTIC SILICON
AUTOMOTIVE RECTIFIERS
Data Sheet
Mechanical Dimensions
FR5001 . . . 5004 Series
Description
Options - Add Suffix to Part #:
FR5000L = 2 Leads
For 1 Lead:
FR5000C = Lead On Cathode
FR5000A = Lead On Anode
Features
n LOW COST
n LOW LEAKAGE CURRENT
n HIGH SURGE CAPABILITY
n HIGH TEMPERATURE CAPABILITY
n DIFFUSED JUNCTION
n MEETS UL SPECIFICATION 94V-0
FR5001 . . . 5004 Series
Maximum Ratings
Peak Repetitive Reverse Voltage...VRRM
Units
FR5001
FR5002
FR5003
FR5004
100
200
300
400
Volts
RMS Reverse Voltage...VR(rms)
70
140
210
280
Volts
DC Blocking Voltage...VDC
100
200
300
400
Volts
Average Forward Rectified Current...IF(av)
Single Phase Resistive Load, 60 Hz, TC = 150°C
............................................. 5 0 ...............................................
Amps
Non-Repetitive Peak Forward Surge Current...IFSM
Surge Supplied @ Rated Load Conditions,
½ Sine Wave, Single Phase, 60 Hz
............................................. 600 ...............................................
Amps
Operating & Storage Temperature Range...TJ, TSTRG
........................................ -50 to 175 .........................................
°C
Maximum Forward Voltage @ 80A...VF (Note 4)
............................................. 1.06 ...............................................
Volts
Maximum DC Reverse Current...IR
@ Rated DC Blocking Voltage
............................................. 2.0 ............................................... µAmps
............................................. 500 ............................................... µAmps
Electrical Characteristics
25°C
150°C
Typical Junction Capacitance...CJ (Note 1)
............................................. 300 ...............................................
pF
Typical Thermal Resistance...RθJC (Note 2)
............................................. 0.8 ...............................................
°C / W
Typical Reverse Recovery Time...tRR
............................................. 3.0 ...............................................
µs
Page 2-14
500
200
100
50
10
.1
100
10
1
Reverse Voltage (V)
F = 1 MHz
VSIG = 50 Vpp
TJ = 25 ° C
Non-Repetitive
Peak Forward Surge Current
TJ = 25°°C
500
TJ = 150°°C
300
150
75
1
10
100
Number of Cycles @ 60 Hz
.1
.01
NOTES: 1.
2.
3.
4.
75
Single Phase ½ Wave
Res. or Ind. Load
60
45
30
Capacitive Load
IPK/AV = 5, 10 & 20
15
140 145 150 155 160 165 170 175
Case Temperature (°° C)
Typical Instantaneous Forward Characteristics
1000
TJ = 100°°C
1
.001
90
Forward Current (A)
Reverse Current (µ
µA)
Typical Reverse Characteristics
10
Forward Current Derating Curve
Average Forward Current (A)
Junction Capacitance (pF)
Peak Forward Surge Current (A)
1500
Typical Junction Capacitance
1000
FR5001 . . . 5004 Series
50 Amp PLASTIC SILICON
AUTOMOTIVE RECTIFIERS
Data Sheet
TJ = 25°°C
40
80
120
Percent of
Rated Peak
Voltage
100
Ratings at
25 Deg. C ambient
temperature
unless otherwise
specified.
10
1
Measured @ 1 MHz and applied reverse voltage of 4.0V.
Thermal Resistance Junction to Case, Jedec Method.
When Mounted to heat sink, from body.
Pulse Test: Pulse Width < 300 µs, Duty Cycle 2%.
TJ = 25°°C PW = 300 µs
Forward
Voltage (V)
.6 .9 1.1 1.4 1.7 2.0 2.3 2.6
Single Phase Half
Wave, 60 Hz
Resistive or
Inductive Load.
For Capacitive
Load, Derate
Current by 20%.
Page 2-15
Similar pages