FP200, FP201, FP202 www.vishay.com Vishay Dale Thin Film Hermetic Flat Pack Thin Film Resistor, Surface Mount Network FEATURES Product may not be to scale • Military/aerospace • Hermetically sealed • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Available Available Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details Vishay Dale Thin Film offers a broad line of precision resistor networks in hermetic Flat-Packs for surface mount requirements in military, space or other harsh environmental applications. These networks provide the long-term stability necessary to insure continuous specification and performance over the 20 years to 30 years life required for space applications. The fabrication of these devices is performed under tight procedural and environmental controls to insure conformance to all 883C level H or K requirements. Custom configurations, values and tolerance combinations are available with fast turnaround. SCHEMATICS FP200 Number of Resistors Number of Leads Type Connection Values Available 7, 8 14, 16 Isolated 500 to 100 k 1 FP201 Number of Resistors Number of Leads Type Connection Values Available 12, 14 14, 16 Series 500 to 100 k 1 FP202 Number of Resistors Number of Leads Type Connection Values Available 13, 15 14, 16 Common 500 to 100 k 1 STANDARD ELECTRICAL SPECIFICATIONS TEST Material Pin/Lead Number Resistance Range TCR: Absolute TCR: Tracking Tolerance: Absolute Tolerance: Ratio Power Rating: Resistor Power Rating: Package Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Thermal EMF Shelf Life Stability: Absolute Shelf Life Stability: Ratio Revision: 16-Mar-17 SPECIFICATIONS Passivated nichrome 14, 16 10 to 1 M (total) ± 10 ppm/°C to 50 ppm/°C ± 5 ppm/°C (standard) ± 0.05 % to ± 1 % ± 0.01 % to ± 0.1 % 100 mW 800 mW R ± 0.05 % R ± 0.015 % 100 V max. not to exceed P x R -55 °C to +125 °C -55 °C to +150 °C R ± 0.01 % R ± 0.002 % CONDITIONS 70 °C 2000 h at +70 °C 2000 h at +70 °C 1 year at + 25 °C 1 year at + 25 °C Document Number: 61073 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 FP200, FP201, FP202 www.vishay.com Vishay Dale Thin Film DIMENSIONS in inches (millimeters) D A C E E1 A e b Q S1 k S 14 LEAD DIMENSION FLAT-PAK FP200 16 LEAD MINIMUM MAXIMUM MINIMUM MAXIMUM 0.086 (2.18) 0.106 (2.69) 0.045 (1.14) 0.115 (2.92) b 0.015 (0.38) 0.019 (0.48) 0.015 (0.38) 0.019 (0.48) C 0.004 (0.10) 0.007 (0.18) 0.003 (0.08) 0.009 (0.23) D 0.373 (9.47) 0.383 (9.73) - 0.440 (11.18) e 0.047 (1.19) 0.053 (1.35) 0.050 (1.27) BSC E 0.250 (6.35) 0.260 (6.60) 0.245 (6.22) 0.285 (7.24) E1 - 0.290 (7.37) - 0.315 (8.00) E2 0.158 (4.01) 0.172 (4.37) 0.130 (3.30) - E3 0.030 (0.76) - 0.030 (0.76) - L - - 0.250 (6.35) 0.370 (9.40) Q 0.026 (0.66) - 0.26 (0.66) 0.045 (1.14) S - 0.045 (1.14) - 0.045 (1.14) S1 0.005 (0.13) - 0.005 (0.13) - k - - 0.008 (0.20) 0.015 (0.38) GLOBAL PART NUMBER INFORMATION New Global Part Numbering: FP2001681001BFBCW F P 2 0 0 1 6 F P 2 0 2 1 6 GLOBAL MODEL CASE SIZE NUMBER OF RESISTORS (1 or 2 digits) FP200 14 16 7 8 FP201 14 16 12 14 FP202 14 16 13 16 8 1 3 1 0 0 1 B F B C W 1 0 0 1 B F B C W OHMIC VALUE ABSOLUTE TOLERANCE RATIO TOLERANCE ABSOLUTE TCR RATIO TCR The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. “R” designates the decimal point. Example: 10R0 = 10 1000 = 100 1001 = 1000 A = 0.05 % B = 0.1 % C = 0.2 % D = 0.5 % F=1% G=2% J=5% K = 10 % M = 20 % B = 0.01 % C = 0.025 % D = 0.05 % F = 0.1 % H = 0.25 % J = 0.5 % K=1% X = Not applicable A = 10 ppm/°C B = 25 ppm/°C D = 50 ppm/°C E = 100 ppm/°C C = 2 ppm (1) D = 3 ppm (1) F = 5 ppm G = 10 ppm X = N/A PACKAGING W = Carrier packaging, 100 min., 1 mult. Historical Part Number example: FP2001681002BFBC (for reference purposes only) FP200 16 8 1002 B F B C MODEL NUMBER OF LEADS NUMBER OF RESISTORS RESISTANCE ABSOLUTE TOLERANCE RATIO TOLERANCE ABSOLUTE TCR RATIO TCR Note (1) Value dependent Revision: 16-Mar-17 Document Number: 61073 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000