Stacked Film Capacitor Chips FEATURES • STACKED METALLIZED POLYPHENYLENE SULFIDE (PPS) FILM • STANDARD EIA 0603, 0805, 1206, 1210, 1913 AND 2416 SIZES • WIDE TEMPERATURE RANGE UP TO +125OC (100pF ~ 0.1μF) • HIGH HEAT AND MOISTURE RESISTANT • VERY STABLE TEMPERATURE, FREQUENCY AND VOLTAGE BIAS CHARACTERISTICS • SUITABLE FOR REFLOW SOLDERING • TAPE AND REEL PACKAGING NSHC Series NSHC IS RECOMMENDED FOR NEW DESIGNS RoHS Compliant includes all homogeneous materials *See Part Number System for Details SPECIFICATIONS Capacitance Range Voltage Ratings Capacitance Tolerance Temperature Range Dissipation Factor (20°C) Insulation Resistance (20°C) Dielectric Withstanding Voltage Temperature Characteristic Case Sizes 0603 0805 1206 1210 1913 2416 100pF ~ 0.0027μF 100pF ~ .01μF 3300pF ~ .047μF .012μF ~ .1μF .047μF ~ .1μF .12μF ~ .22μF 16Vdc (12Vrms), 50Vdc (40Vrms) ±5% Std, ±2% Opt. -55°C ~ +125°C (0.12μF ~ 0.22μF voltage derated above +105°C) 0.6% max. @ 1KHz 3 Gigohms Minimum 150% of Rated Voltage 60 Seconds or 175% of Rated Voltage for 5 Seconds (except 1913 and 2416 case sizes) ±3% ΔC Maximum Over Temperature Range ENVIRONMENTAL CHARACTERISTICS Life Test At +125°C 1,000 Hours at 125% of Rated Voltage Resistance to Soldering Heat +260°C Peak Humidity Load Life: (1) 1000 Hours, +40°C (2) 500 Hours, +60°C (3) 500 Hours +85°C/85% RH Solderability with 25% Wt Rosin-Methanol Flux Capacitance Change Dissipation Factor Insulation Resistance Capacitance Change Dissipation Factor Insulation Resistance Capacitance Change Dissipation Factor Within ±2% of Initial Value 0.68% Maximum 1 Gigohm Minimum Within ±3% of Initial Value 0.66% Maximum 1 Gigohm Minimum (1) & (2) Within ±2% of Initial value (3) Within ±10% of initial value (1) & (2) 0.90% Maximum (3) 1.2% maximum Insulation Resistance (1) 1 Gigohm Minimum (2) 0.5 Gigohm Minimum (3) 0.01 Gigohm min. 90% Minimum Coverage After 2.5 Second Dip into 255°C Solder Pot RECOMMENDED REFLOW PROFILE (maximum 2 times) Peak Temperature 260°C 250 200 150 Cool Down 100 Time above 230°C 30 sec. max. 50 25 Ramp-up 25°C ~ 150°C 90 sec. max. 0 RECOMMENDED LAND PATTERN (mm) Case Code J1 A1, A2 B1, B2, B3 C2, C3 D5, D6 E6, E7, E8 EIA Size 0603 0805 1206 1210 1913 2416 A 0.6 0.8 1.8 1.8 3.0 4.0 B 2.0 2.4 3.6 3.6 5.6 7.0 C 0.7 1.1 1.4 2.3 3.0 3.8 Pre-heat 150°C ~ 180°C 120 sec. max. Time C Temperature - Deg. C 300 Solder within 1 year. Storage at +30°C and 60% RH A B ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 1 Stacked Film Capacitor Chips NSHC Series 16V STANDARD PRODUCTS AND CASE SIZES Part Number NSHC101J16TRJ1F NSHC121J16TRJ1F NSHC151J16TRJ1F NSHC181J16TRJ1F NSHC221J16TRJ1F NSHC271J16TRJ1F NSHC331J16TRJ1F NSHC391J16TRJ1F NSHC471J16TRJ1F NSHC561J16TRJ1F NSHC681J16TRJ1F NSHC821J16TRJ1F NSHC102J16TRJ1F NSHC122J16TRJ1F NSHC152J16TRJ1F NSHC182J16TRJ1F NSHC222J16TRJ1F NSHC272J16TRJ1F NSHC332J16TRA1F NSHC392J16TRA1F NSHC472J16TRA1F NSHC562J16TRA1F NSHC682J16TRA1F NSHC822J16TRA2F NSHC103J16TRA2F NSHC123J16TRB1F NSHC153J16TRB1F NSHC183J16TRB1F NSHC223J16TRB1F NSHC273J16TRB2F NSHC333J16TRB2F NSHC393J16TRB3F NSHC473J16TRB3F NSHC563J16TRC2F NSHC683J16TRC2F NSHC823J16TRC3F NSHC104J16TRC3F Cap. Value 100pF 120 150 180 220 270 330 390 470 560 680 820 0.001 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 Cap. Code 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 Size Code J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 A1 A1 A1 A1 A1 A2 A2 B1 B1 B1 B1 B2 B2 B3 B3 C2 C2 C3 C3 Length L ±0.2 Width W Height H ±0.2 p EIA 1.6 0.8 ± 0.15 0.7 ± 0.15 0.35 ± 0.20 0603 2.0 1.25 ± 0.2 0.45 ± 0.25 0805 0.65 ± 0.35 1206 0.65 ± 0.35 1210 0.9 1.1 0.9 3.2 1.6 ± 0.2 1.1 1.5 1.5 3.2 2.5 ± 0.2 2.1 OUTLINE DRAWING Stacked Element Terminations: 95.5% Sn, 4% Ag and 0.5% Cu over phenolic resin/Ag/Ni/Cu over copper base H p L2 L1 p W Stacked Film Capacitor Chips NSHC Series 50V STANDARD PRODUCTS AND CASE SIZES Part Number NSHC101J50TRA1F NSHC121J50TRA1F NSHC151J50TRA1F NSHC181J50TRA1F NSHC221J50TRA1F NSHC271J50TRA1F NSHC331J50TRA1F NSHC391J50TRA1F NSHC471J50TRA1F NSHC561J50TRA1F NSHC681J50TRA1F NSHC821J50TRA1F NSHC102J50TRA1F NSHC122J50TRA1F NSHC152J50TRA1F NSHC182J50TRA1F NSHC222J50TRA1F NSHC272J50TRA1F NSHC332J50TRB1F NSHC392J50TRB1F NSHC472J50TRB1F NSHC562J50TRB1F NSHC682J50TRB1F NSHC822J50TRB2F NSHC103J50TRB2F NSHC123J50TRC1F NSHC153J50TRC1F NSHC183J50TRC2F NSHC223J50TRC2F NSHC273J50TRC2F NSHC333J50TRC3F NSHC393J50TRC3F NSHC473J50TRD5F NSHC563J50TRD5F NSHC683J50TRD5F NSHC823J50TRD6F NSHC104J50TRD6F NSHC124J50TRE6F NSHC154J50TRE6F NSHC184J50TRE7F NSHC224J50TRE8F Cap. Value 100pF 120 150 180 220 270 330 390 470 560 680 820 0.001 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 Cap. Code 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 Size Code A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 B1 B1 B1 B1 B1 B2 B2 C1 C1 C2 C2 C2 C3 C3 D5 D5 D5 D6 D6 E6 E6 E7 E8 Length L ±0.2 Width W Height H ±0.2 p EIA 2.0 1.25 ± 0.2 0.9 0.45 ± 0.25 0805 3.2 1.6 ± 0.2 0.65 ± 0.35 1206 0.65 ± 0.35 1210 0.80 ± 0.30 1913 0.80 ± 0.30 2416 0.9 1.1 1.1 3.2 2.5 ± 0.2 1.5 2.1 1.5 4.8 3.3 ± 0.3 2.1 1.9 6.0 4.1 ± 0.3 2.5 2.8 OUTLINE DRAWING Stacked Element Terminations: 95.5% Sn, 4% Ag and 0.5% Cu over phenolic resin/Ag/Ni/Cu over copper base H p L2 L1 p W Stacked Film Capacitor Chips NSHC Series TAPE AND REEL DIMENSIONS (mm) Case Code J1 A1 A2 B1 B2 B3 C2 C3 D5 D6 E6 E7 E8 A±0.1 1.00 1.55 1.55 1.9 1.9 1.9 2.8 2.8 3.8 3.8 4.6 4.6 4.6 B±0.1 1.85 2.3 2.3 3.5 3.5 3.5 3.5 3.5 5.1 5.1 6.3 6.3 6.3 C±0.2 1.0 1.3 1.3 1.5 1.5 1.9 1.9 2.5 2.0 2.6 2.7 3.5 3.5 t ± 0.05 0.20 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.30 0.30 0.30 0.30 0.30 W±0.3 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 12.0 12.0 12.0 12.0 12.0 F ± 0.05 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 5.50 5.50 5.50 5.50 5.50 P±0.1 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 8.0 8.0 8.0 8.0 8.0 D+0.2/-0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.5 1.5 - E ± 2.0 180 180 180 180 180 180 180 180 330 330 330 330 330 Qty/Reel 4,000 3,000 3,000 3,000 3,000 2,000 2,000 2,000 3,000 3,000 3,000 2,000 2,000 1.5 +0.1 -0 4.0 ±0.1 13 ±0 .0 .5 2.0 ±0.5 B W F E t .0 21 0.8 ± D∅ C A P 13.4 ±1.0 PART NUMBER SYSTEM NSHC 103 J 16 TR A2 F RoHS compliant Size Code Tape & Reel Voltage Tolerance Code: J=±5%, G=±2% Capacitance in pF, 1st two digits are significant, 3rd digit is no. of zeros Series 60 ±2.0 EMBOSSED PLASTIC CARRIER 1.75 ±0.1 17.4 ±1.0 Stacked Film Capacitor Chips NSHC 100V Series FEATURES • STACKED METALLIZED POLYPHENYLENE SULFIDE (PPS) FILM • STANDARD EIA 1913, 2416, 2820 AND 2825 SIZES • WIDE TEMPERATURE RANGE UP TO +105OC • HIGH HEAT AND MOISTURE RESISTANT • VERY STABLE TEMPERATURE, FREQUENCY, VOLTAGE, BIAS AND nDIELECTRIC ABSORPTION CHARACTERISTICS • SUITABLE FOR REFLOW SOLDERING • TAPE AND REEL PACKAGING NSHC IS RECOMMENDED FOR NEW DESIGNS RoHS Compliant includes all homogeneous materials *See Part Number System for Details SPECIFICATIONS 1913 0.01 ~ 0.027μF Capacitance Range Voltage Ratings Capacitance Tolerance Temperature Range Dissipation Factor (20°C) Insulation Resistance (20°C) Dielectric Withstanding Voltage Temperature Characteristic Dielectric Absorption Case Sizes 2416 2820 0.033 ~ .068μF 0.082 ~ 0.12μF 100Vdc (40Vrms) max. ±5% Std, ±2% Opt. -55°C ~ +105°C 0.6% max. @ 1KHz 3 Gigohms Minimum 150% of Rated Voltage 60 Seconds ±1% ΔC Maximum Over Temperature Range Typical 0.05 ~ 0.10% Typical 2825 0.015 ~ 0.22μF ENVIRONMENTAL CHARACTERISTICS Life Test At +105°C 1,000 Hours at 125% of Rated Voltage Resistance to Soldering Heat +260°C Peak Humidity Load Life: 1000 Hours, +40°C/95% RH Capacitance Change Dissipation Factor Insulation Resistance Capacitance Change Dissipation Factor Insulation Resistance Capacitance Change Dissipation Factor Insulation Resistance Dielectric Withstanding Solderability with 25% Wt Rosin-Methanol Flux Within ±2% of Initial Value 0.66% Maximum 1 Gigohm Minimum Within ±3% of Initial Value 0.66% Maximum 1 Gigohm Minimum Within ±3% of initial value 0.90% maximum @ 1KHz 1 Gigohm minimum 130% of rated voltage for 60 seconds 90% Minimum Coverage After 2.5 Second Dip into 255°C Solder Pot RECOMMENDED REFLOW PROFILE (maximum 2 times) Peak Temperature 260°C +250°C 30 sec. max. 250 200 150 Cool Down 100 Time above 220°C 90 sec. max. 50 25 0 Ramp-up 25°C ~ 150°C 90 sec. max. RECOMMENDED LAND PATTERN (mm) EIA Size 1913 2416 2820 2825 A 2.6 3.8 4.5 4.5 B 6.6 7.8 9.0 9.0 C 3.0 3.8 4.6 5.7 Pre-heat 150°C ~ 180°C 150 sec. max. Time C Temperature - Deg. C 300 Solder within 6 year. Storage at +35°C and 85% RH A B Stacked Film Capacitor Chips NSHC 100V Series STANDARD PRODUCTS, SIZE CODE AND DIMENSIONS (mm) Part Number Cap. Code NSHC103J100TRD1F NSHC123J100TRD1F NSHC153J100TRD2F NSHC183J100TRD2F NSHC223J100TRD3F NSHC273J100TRD4F NSHC333J100TRE1F NSHC393J100TRE2F NSHC473J100TRE3F NSHC563J100TRE4F NSHC683J100TRE5F NSHC823J100TRG2F NSHC104J100TRG3F NSHC124J100TRG5F NSHC154J100TRH2F NSHC184J100TRH4F NSHC224J100TRH6F 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 Working Voltage (VDC) 100V D1 D1 D2 D2 D3 D4 E1 E2 E3 E4 E5 G2 G3 G5 H2 H4 H6 Length L Width W Height H p EIA Reel Size Code Quantity 1.4 ± 0.2 3000 4.8 ± 0.2 6.0 ± 0.2 3.3 ± 0.3 4.1 ± 0.3 5.0 ± 0.4 7.1 ± 0.4 6.3 ± 0.4 2.0 ± 0.2 2.4 ± 0.2 2.8 ± 0.2 1.8 ± 0.2 2.0 ± 0.2 2.4 ± 0.2 2.8 ± 0.2 3.2 ± 0.2 2.8 ± 0.3 3.0 ± 0.3 3.4 ± 0.3 3.4 ± 0.3 4.0 ± 0.3 4.8 ± 0.3 1913 2000 3000 0.35 ± 0.2 2416 2000 2820 1500 2825 1000 OUTLINE DRAWING PART NUMBER SYSTEM Stacked Element Terminations: NSHC 103 J 100 TR D1 F RoHS compliant Size Code Tape & Reel Voltage Tolerance Code: J=±5%, G=±2% Capacitance in pF, 1st two digits are significant, 3rd digit is no. of zeros 95.5% Sn, 4% Ag and 0.5% Cu over phenolic resin/Ag/Ni/Cu over copper base H Series L2 p L1 TAPE DIMENSIONS (mm) Case Code A±0.1 B±0.1 C±0.2 D1 2.0 D2 3.8 5.1 2.6 D3, D4 3.4 E1, E2 2.7 E3, E4 4.6 6.3 3.5 E5 4.6 G2 ~ G5 5.5 7.5 4.7 H2 ~ H6 6.91 8.43 W p t W±0.3 F P±0.1 D+0.2/-0 1.5 0.3 ±0.05 12.0 5.5 ±0.05 8.0 - 0.343 ± 0.013 5.686 16 7.5 ± 0.1 12 1.5 Qty/Reel 3,000 3,000 2,000 3,000 2,000 2,000 1,500 1,000 4.0 ±0.1 13 ±0 .0 .5 W F B 2.0 ±0.5 330 ±2.0 1.5 +0.1 -0 t .0 21 0.8 ± D∅ C A P 13.4 ±1.0 60 ±2.0 EMBOSSED PLASTIC CARRIER 1.75 ±0.1 17.4 ±1.0