MMBZ4617-V to MMBZ4627-V Vishay Semiconductors Small Signal Zener Diodes Features • Silicon Planar Low Noise Zener Diodes. • 350 mW high quality voltage regulator e3 designed for low leakage, low current and low noise applications • 5 % Tolerance on VZ • High temperature soldering guaranteed: 260 °C/4X10 seconds at terminals. • Lead (Pb)-free component • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC 3 1 2 18078 Mechanical Data Case: SOT-23 Plastic case Weight: approx. 8.8 mg Terminals: Solderable per MIL-STD-750, method 2026 Packaging codes/options: GS18 / 10 k per 13 " reel (8 mm tape), 10 k/box GS08 / 3 k per 7 " reel (8 mm tape), 15 k/box Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Test condition Power dissipation Symbol Ptot Value Unit 1) mW 350 Forward voltage, maximum IF = 200 mA VF 1.1 V Forward voltage, typical IF = 200 mA VF 0.97 V Symbol Value Unit Tj 150 °C TS - 55 to + 150 1) On FR - 5 board using recommended solder pad layout Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Test condition Maximum junction temperature Storage temperature range Thermal resistance junction to ambient air 1) RthJA 420 1) °C °C/W On FR - 5 board using recommended solder pad layout Document Number 85770 Rev. 1.3, 14-Oct-05 www.vishay.com 1 MMBZ4617-V to MMBZ4627-V Vishay Semiconductors Electrical Characteristics Partnumber Note: Marking Code Zener1) Voltage Test Current Maximum Zener Impedance VZ @ IZT IZT ZZT @ IZT Maximum Reverse Leakage Current IR Maximum Zener Current Maximum Noise Density VR IZM ND @ IZT = 250 μA V μA Ω μA V mA μV/√Hz MMBZ4617-V G17 2.4 250 1400 2.0 1.0 95 1.0 MMBZ4618-V G18 2.7 250 1500 1.0 1.0 90 1.0 MMBZ4619-V G19 3.0 250 1600 0.8 1.0 85 1.0 MMBZ4620-V G20 3.3 250 1650 7.5 1.5 80 1.0 MMBZ4621-V G21 3.6 250 1700 7.5 2.0 75 1.0 MMBZ4622-V G22 3.9 250 1650 5.0 2.0 70 1.0 MMBZ4623-V G23 4.3 250 1600 4.0 2.0 65 1.0 MMBZ4624-V G24 4.7 250 1550 10 3.0 60 1.0 MMBZ4625-V G25 5.1 250 1500 10 3.0 55 2.0 MMBZ4626-V G26 5.6 250 1400 10 4.0 50 4.0 MMBZ4627-V G27 6.2 250 1200 10 5.0 45 5.0 1) VZ tested with 5 ms pulse 0.175 (.007) 0.098 (.005) 0.1 (.004) max. 0.4 (.016) 0.95 (.037) 1.15 (.045) Package Dimensions in mm (Inches) 2.6 (.102) 2.35 (.092) 0.4 (.016) ISO Method E 3.1 (.122) Mounting Pad Layout 2.8 (.110) 0.52 (0.020) 0.4 (.016) 0.95 (.037) 0.95 (.037) 1.20(.047) 1.43 (.056) 0.9 (0.035) 2.0 (0.079) 0.95 (0.037) 0.95 (0.037) 17418 www.vishay.com 2 Document Number 85770 Rev. 1.3, 14-Oct-05 MMBZ4617-V to MMBZ4627-V Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Document Number 85770 Rev. 1.3, 14-Oct-05 www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1