NTC Type C100 Thermometrics EpoxyCoated Chip Thermistor Description Features Epoxy-coated chip thermistors with 0.012 in (0.3 mm) bare tinned-copper lead-wires. • Low cost, solid state temperature sensor • Suitable for use over range of -112°F to 302°F (–80°C to 150°C) • High sensitivity greater than –4% /°C at 77°F (25°C) • Suitable for temperature measurement, control and compensation • High reliability and stability • Resin coated for good mechanical strength and resistance to solvents Amphenol Advanced Sensors Type C100 Specifications Epoxy-coated chip thermistor Select appropriate part number below for resistance and temperature tolerance desired. R25°C Material System R25°C ± 1% R25°C ± 2% R25°C ± 5% R25°C ± 10% 2000 F C100F202F C100F202G C100F202J C100F202K 2252 F C100F232F C100F232G C100F232J C100F232K 3000 F C100F302F C100F302G C100F302J C100F302K 5000 F C100F502F C100F502G C100F502J C100F502K 10000 F C100F103F C100F103G C100F103J C100F103K 10000 Y C100Y103F C100Y103G C100Y103J C100Y103K 15000 F C100F153F C100F153G C100F153J C100F153K 20000 F C100F203F C100F203G C100F203J C100F203K 30000 H C100H303F C100H303G C100H303J C100H303K 50000 G C100G503F C100G503G C100G503J C100G503K 100000 Y C100Y104F C100Y104G C100Y104J C100Y104K 100000 G C100G104F C100G104G C100G104J C100G104K 1.5 in (38.1 mm) Ø 0.1 in (2.4 mm) maximum Tinned-copper alloy leads Ø 0.01 in (0.3 mm) NTC Type C100 Dimensions Options Data Consult Thermometrics for availability of options: Thermal And Electrical Properties: • Other resistance values in the range of 100 Ω to 100 kΩ • Other tolerances • Alternative lead lengths • Other reference temperatures • Alternative lead wires or lengths Amphenol Advanced Sensors • Dissipation constant: (still air) 1 mW/°C (stirred oil) 8 mW/°C • Thermal time constant: (still air) 10 seconds (stirred oil) 1 second • Maximum power at 77°F (25°C) 75 mW; derated from 100% at 77°F (25°C) to 0% at 212°F (100°C) www.amphenol-sensors.com © 2014 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice. Other company names and product names used in this document are the registered trademarks or trademarks of their respective owners. AAS-920-517A-03/2014