FPG2 Fuseholders www.schurter.com/pg02 Shock-Safe Fuseholder, 5 x 20 mm, Slot/Fingergrip, Rear-Side, IP 40 / IP 67, IEC 60335-1 Fingergrip 250 VAC · 2.5 W / 10 A (VDE)16 A (UL/CSA) Description - Meets the new requirements of IEC 60335-1 Ed. 4.0 for appliances in unattended use (clause 30.2.3). This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 to -13. Order numbers: xxxx.xxxx.15 - Mounting from rear-side Standards - IEC 60127-6 - UL 4248-1 / UL 512 - CSA C22.2 no. 39 Applications - Industrial electronic - Household appliances - Medical equipments References General Product Information Weblinks Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check, Accessories, Product Change Notification (PCN) Approvals - VDE License Number: 127216 - UL File Number: E39328 Technical Data Shocksafe Category Fuse-Link Mounting Mounting Terminal Rated Voltage Rated Current Rated Power Acceptance IEC PC2 5 x 20 mm Panel Mount, Rear-Side Fixing Nut Solder or Quick-Connect 4.8 x 0.5 mm 250 VAC 10 A (VDE), 16 A (UL/CSA) 2.5 W / 10 A @ Ta 23 °C Admissible power acceptance at higher ambient temperature see derating curves Degree of Protection IP 40 / IP 67 Protection Class Suitable for appliances with protection class 1 or 2 acc. to IEC 61140 Admissible Ambient Air Temp. -40 °C to 85 °C Climatic Category 40/085/21 acc. to IEC 60068-1 Material: Socket Thermoplastic, black, UL 94V-0 Material: Terminals Tin-Plated Copper Alloy Unit Weight (Socket/Cap) 6.01 g Storage Conditions 0 °C to 60 °C, max. 70% r.h. Product Marking , Type, Voltage, Power Acc./Current Rating, Approvals Soldering Methods Solderability Resistance to Soldering Heat Contact Resistance Dielectric Strength Impulse Withstand Voltage Insulation Resistance Overvoltage Category Pollution Degree Resistance to Vibration Admissible Torque on Fixing Nut Panel Thickness s Fuses Iron 350 °C / 2 sec acc. to IEC 60068-2-20, Test Ta, method 2 350 °C / 10 sec acc. to IEC 60068-2-20, Test Tb, method 2 < 5 mΩ at 20 mV > 3 kV between L-N > 4 kV between L/N-PE (50 Hz; 1 min) > 2.5 kV between L-N > 6 kV between L/N-PE > 10 MΩ between L-N > 100 MΩ between L/N-PE (500 VDC; 1 min) I - II acc. to IEC 60664-1 1 - 3 acc. to IEC 60664-1 acc. to IEC 60068-2-6, test Fc max 1.2 Nm max 8 mm FPG2 Fuseholders www.schurter.com/pg02 Abmessungen 46.5 mm ø 15 1.8 ø 12.5 1.8 ø 16.1 7.62 ø 11.1 ø 15 ø 16.1 18.5 M12.7x1.5 M12.7x1.5 20 13.5 8 46.5 Variants Fingergrip 3101.0025 and 3101.0225 ø 15 0 0 11.7 -0.15 0 13 -0.3 Mounting holes Derating Curves for Fuseholders Admissible power acceptance in Watt 1.8 41.5 12.7 -0.1 0 12.7 -0.1 0 2.5 2.0 I = 1.0 In I = 0.7 In I = << In 0.5 0.0 40 60 80 100 Ambient air temperature Ta °C 8 Variants Fingergrip 3101.0125 and 3101.0325 12 -0.1 20 20.6 46.5 Variants 3101.0120 and 3101.0320 0 ø 12.5 1.8 ø 16.1 7.62 ø 11.1 ø 15 ø 16.1 12.9 8 41.5 1.0 6 17.9 M12.7x1.5 M12.7x1.5 20.6 2.5 SW14 6 SW14 1.5 8 Fuses 7.62 4 2.5 ø 11.1 Variants 3101.0020 and 3101.0220 12.9 8 20 41.5 41.5 8 6 SW14 6 SW14 13.5 2.5 7.62 8 ø 11.1 4 2.5 8 FPG2 Fuseholders www.schurter.com/pg02 Variants Holder Cap Terminal Degree of Protection Material Remark Order Number l Slot Knob Solder IP 40 Thermoplastic - 3101.0020 l Slot Knob Solder IP 40 Spec. Thermoplastic 1 Approvals pending 3101.0020.15 l Slot Knob Quick-Connect 4.8 x 0.5 mm IP 40 Thermoplastic - 3101.0220 l Slot Knob Quick-Connect 4.8 x 0.5 mm IP 40 Spec. Thermoplastic 1 Approvals pending 3101.0220.15 l Fingergrip Solder IP 40 Thermoplastic - 3101.0025 l Fingergrip Solder IP 40 Spec. Thermoplastic 1 Approvals pending 3101.0025.15 l Fingergrip Quick-Connect 4.8 x 0.5 mm IP 40 Thermoplastic - 3101.0225 l Fingergrip Quick-Connect 4.8 x 0.5 mm IP 40 Spec. Thermoplastic 1 Approvals pending 3101.0225.15 l Slot Knob Solder IP 67 Thermoplastic - 3101.0120 l Slot Knob Solder IP 67 Spec. Thermoplastic 1 Approvals pending 3101.0120.15 l Slot Knob Quick-Connect 4.8 x 0.5 mm IP 67 Thermoplastic - 3101.0320 l Slot Knob Quick-Connect 4.8 x 0.5 mm IP 67 Spec. Thermoplastic 1 Approvals pending 3101.0320.15 l Fingergrip Solder IP 67 Thermoplastic - 3101.0125 l Fingergrip Solder IP 67 Spec. Thermoplastic 1 Approvals pending 3101.0125.15 l Fingergrip Quick-Connect 4.8 x 0.5 mm IP 67 Thermoplastic - 3101.0325 l Fingergrip Quick-Connect 4.8 x 0.5 mm IP 67 Spec. Thermoplastic 1 Approvals pending 3101.0325.15 Spec. thermoplastic meet the new requirements of IEC 60335-1 Ed. 4.0 for appliances in unattended use (clause 30.2.3). This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 to -13. White and grey colours available on request Packaging Unit Bulk 186 x 91 x 110 mm (100 pcs.) The specifications, descriptions and illustrations indicated in this document are based on Fuses current information. All content is subject to modifications and amendments.