MASWSS0006 GaAs SPDT 2.5 V High Power Switch DC - 3.0 GHz Features Rev. V4 Functional Schematic • Low Voltage Operation: 2.5 V • Excellent Harmonics: <-67 dBc at +34 dBm & 1.0 GHz • Low Insertion Loss: 0.40 dB at 1.0 GHz • High Isolation: 20 dB at 2.0 GHz • SOT-26 Package • 0.5 micron GaAs PHEMT Process PIN 1 PIN 6 RF1 V1 GND RFC RF2 V2 100pF 39 pF 39 pF 100pF Description 39 pF 100pF M/A-COM’s MASWSS0006 is a GaAs PHEMT MMIC single pole double throw (SPDT) high power switch in a low cost SOT-26 package. The MASWSS0006 is ideally suited for applications where high power, low control voltage, low insertion loss, high isolation, small size and low cost are required. Typical applications are for GSM and DCS handset systems that connect separate transmit and receive functions to a common antenna, as well as other related handset and general purpose applications. This part can be used in all systems operating up to 3.0 GHz requiring high power at low control voltage. The MASWSS0006 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. Ordering Information1 Part Number Package MASWSS0006 Bulk Packaging MASWSS0006TR 1000 piece reel MASWSS0006TR-3000 3000 piece reel MASWSS0006SMB Sample Test Board 1. Reference Application Note M513 for reel size information. Pin Configuration Pin No. Pin Name Description 1 RF1 RF Port 1 2 GND RF Ground 3 RF2 RF Port 2 4 V2 Control 2 5 RFC RF Common Port 6 V1 Control 1 Absolute Maximum Ratings 2,3 Parameter Absolute Maximum Input Power (0.5 - 3.0 GHz, 2.5 V Control) +38 dBm Voltage ±8.5 volts Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. Truth Table 4,5 V1 V2 ANT– RF1 ANT - RF2 1 0 On Off 0 1 Off On 4. Differential voltage, V (state 1) - V (State 0), must be +2.5 V minimum. 5. 0 = -5 V to 2.5 V, 1 = -2.5 V to +5 V. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0006 GaAs SPDT 2.5 V High Power Switch DC - 3.0 GHz Rev. V4 Electrical Specifications: TA = 25°C, VC = 0 V / 2.5 V, Z0 = 50 Ω 6 Parameter Test Conditions Units Min. Typ. Max. Insertion Loss7 DC – 1.0 GHz 1.0 – 2.0 GHz 2.0 - 3.0 GHz dB dB dB — — — 0.40 0.50 0.75 0.65 0.75 Isolation DC – 1.0 GHz 1.0 – 2.0 GHz 2.0 - 3.0 GHz dB dB dB 23.0 17.5 — 26 20 16 — — — Return Loss DC – 2.0 GHz 2.0 - 3.0 GHz dB dB — — 20 16 — — IP3 Two Tone, +26 dBm / tone, 5 MHz Spacing > 50 MHz dBm — 57 — P0.1dB — dBm — 39 — Harmonic 1.0 GHz, PIN = +34 dBm dBc — -75 -67 3 Harmonic 1.0 GHz, PIN = +34 dBm dBc — -75 -67 Trise, Tfall 10% to 90% RF, 90% to 10% RF uS — 0.04 — Ton, Toff 50% control to 90% RF, and 50% control to 10% RF uS — 0.06 — Transients In Band mV — 50 — uA — — 50 2 nd rd Gate Leakage 6. External DC blocking capacitors are required on all RF ports. 7. Insertion Loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 - 500 MHz, 100 pF for 0.5 - 3.0 GHz. Qualification SOT-26 Plastic Package† Qualified to M/A-COM specification REL-201, Process Flow –2. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. † Meets JEDEC moisture sensitivity level 1 requirements 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0006 GaAs SPDT 2.5 V High Power Switch DC - 3.0 GHz Rev. V4 Typical Performance Curves vs. Temperature, 100 pF blocking capacitors Insertion Loss vs. Frequency Isolation vs. Frequency 40 1.0 0.8 +25°C +85°C -40°C 35 +25°C +85°C -40°C 30 25 0.6 20 0.4 15 10 0.2 5 0.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0 0.0 0.5 Frequency (GHz) 1.0 1.5 2.0 2.5 3.0 3.5 Frequency (GHz) 3rd Harmonic vs. Control Voltage, Pin = 34 dBm CW, 1 GHz 2nd Harmonic vs. Control Voltage, Pin = 34 dBm CW, 1 GHz -60 -60 25°C -40°C 85°C -65 25°C -40°C 85°C -65 -70 -70 -75 -75 -80 -80 -85 -85 -90 -90 2.0 2.5 3.0 3.5 V (V) C 4.0 4.5 5.0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 V (V) C 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.