Specification ： TE -module HPE-200-14-11 Issue 2 Issued: 29/05/2008 SPECIFICATION Product：Thermoelectric module Part Number：HPE-200-14-11 1． Scope 1—1 1—2 This specification is applied to Multicomp thermoelectric modules Revision of these specifications is carried out after consent. 2． Specification 2－1 Parameters Parameters Remarks Internal resistance 2.40 Ω ± 10% Note-1 Imax. 8.5 A Note-2 Vmax. 24.6 V Note-3 Th=25℃ Qmax. 127.5 W Note-4 ⊿Tmax. 71℃ Note-5 solder melting point 138 ℃ Maximum. compress. 1MPa Note-6 Note-7 Note-1 Measured by AC 4-terminal method at 25℃. Note-2 Maximum current at ⊿Tmax. Note-3 Maximum voltage at ⊿Tmax. Note-4 Maximum cooling capacity at Imax.,Vmax. and ⊿T＝0℃. Note-5 Maximum temperature difference at Imax.,Vmax. and Q＝0W. （Maximum parameters are measured in a vacuum 1.3P） Note-6 The solder melting point of thermoelectric module Note-7 Recommended maximum compression (not destruction limit) 1/2 2 -2 Recommendations: - high cooling capacity from a small surface and long lifetime in power cycling applications with change of current polarity - operation temperature up to 90°С for long lifetime; up to 110 degC for short periods - with operation current close to 0.5 Imax extremely high COP (coefficient of performance possible) - preferable application; high cooling capacity at high temperatures / cycling ２－3 Performance Graph (298K) ２－4 Performance Graph (323K)