UNISONIC TECHNOLOGIES CO., LTD MPSA92M PNP EPITAXIAL SILICON TRANSISTOR HIGH VOLTAGE TRANSISTOR FEATURES * Collector-Emitter voltage: VCEO=-300V * Collector Dissipation: PC(MAX)=625mW * Low collector-Emitter saturation voltage 1 TO-92 ORDERING INFORMATION Ordering Number Lead Free Halogen Free MPSA92ML-T92-B MPSA92MG-T92-B MPSA92ML-T92-K MPSA92MG-T92-K MPSA92ML-T92-R MPSA92MG-T92-R Note: Pin Assignment: E:EMITTER B:BASE C:COLLECTOR MPSA92ML-T92-B Package TO-92 TO-92 TO-92 Pin Assignment 1 2 3 E B C E B C E B C (1)Packing Type (1) B: Tape Box, K: Bulk, R: Tape Reel (2)Package Type (2) T92: TO-92 (3)Lead Free (3) Halogen Free, L: Lead Free www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., Ltd Packing Tape Box Bulk Tape Reel 1 of 2 QW-R201-020.Ba MPSA92M PNP EPITAXIAL SILICON TRANSISTOR ABSOLUTE MAXIMUM RATINGS (TJ=25°C, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Collector-Base Voltage VCBO -300 V Collector-Emitter Voltage VCEO -300 V Emitter-Base Voltage VEBO -6 V Collector Dissipation (TA=25°C) PC 625 mW Collector Current IC -800 mA Junction Temperature TJ 150 °C Storage Temperature TSTG -55~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (TJ=25°C, unless otherwise specified) PARAMETER Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cut-Off Current Collector Cut-Off Current Emitter Cut-Off Current DC Current Gain (Note 1) Collector-Emitter Saturation Voltage SYMBOL BVCBO BVCEO BVCES BVEBO ICBO ICES IEBO hFE VCE(SAT) Base-Emitter Saturation Voltage VBE(SAT) Output Capacitance COB Note: 1. Pulse test: PW<300μs, Duty Cycle<2% TEST CONDITIONS IC=-100μA, IE=0 IC=-1mA, IB=0 IC=-100μA, VBE=0 IE=-100μA, IC=0 VCB=-300V, IE=0 VCB=-300V, VBE=0 VEB=-4V, IC=0 VCE=-10V, IC=-1mA VCE=-10V, IC=-10mA VCE=-10V, IC=-100mA VCE=-10V, IC=-200mA IC=-30mA, IB=-1mA IC=-100mA, IB=-10mA IC=-10mA, IB=-1mA VCB=-20V, IE=0, f=1MHz MIN -300 -300 -300 -5 TYP MAX -100 -1 100 60 80 80 40 UNIT V V V V nA μA nA 300 -0.20 -0.7 -0.75 8 V V pF UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 2 QW-R201-020.Ba