FDW6923 P-Channel 2.5V Specified PowerTrench MOSFET with Schottky Diode General Description Features This P-Channel 2.5V specified MOSFET is a rugged gate version of Fairchild Semiconductor’s advanced PowerTrench process. It is combined with a low forward drop Schottky diode which is isolated from the MOSFET, providing a compact power solution for asynchronous DC/DC converter applications. • –3.5 A, –20 V. RDS(ON) = 0.045 Ω @ VGS = –4.5 V RDS(ON) = 0.075 Ω @ VGS = –2.5 V • VF < 0.55 V @ 1 A Applications • High performance trench technology for extremely low RDS(ON) • DC/DC conversion • Low profile TSSOP-8 package A A A C G S S D TSSOP-8 5 4 6 3 7 2 8 1 Pin 1 MOSFET Absolute Maximum Ratings Symbol TA=25oC unless otherwise noted VDSS Drain-Source Voltage Ratings –20 VGSS Gate-Source Voltage ± 12 V ID Drain Current A PD – Pulsed MOSFET Power Dissipation (minimum pad) (Note 1) Schottky Power Dissipation (minimum pad) (Note 1) Operating and Storage Junction Temperature Range –3.5 –30 TJ, TSTG Parameter – Continuous (Note 1) 1.2 1.0 -55 to +150 Units V W °C Schottky Maximum Ratings VRRM Repetitive Peak Reverse Voltage 20 V IF Average Forward Current 1.5 A IFM Peak Forward Current 30 A MOSFET: 115 Schottky: 130 °C/W Thermal Characteristics RθJA Thermal Resistance, Junction-to-Ambient (minimum pad) (Note 1) Package Marking and Ordering Information Device Marking Device Reel Size Tape width 6923 FDW6923 13’’ 16mm 2008 Fairchild Semiconductor International Quantity 2500 units FDW6923 Rev. D1(W) FDW6923 July 2008 Symbol Parameter TA = 25°C unless otherwise noted Test Conditions Min Typ Max Units Off Characteristics BVDSS Drain–Source Breakdown Voltage VGS = 0 V, ID = –250 µA ∆BVDSS ∆TJ IDSS Breakdown Voltage Temperature Coefficient Zero Gate Voltage Drain Current ID = –250 µA, Referenced to25°C VDS = –16 V, VGS = 0 V –1 µA IGSSF Gate–Body Leakage, Forward VGS = –12 V, VDS = 0 V –100 nA IGSSR Gate–Body Leakage, Reverse VGS = 12 V, VDS = 0 V 100 nA –1.5 V On Characteristics –20 V –16 mV/°C (Note 2) VGS(th) Gate Threshold Voltage VDS = VGS, ID = –250 µA ∆VGS(th) ∆TJ RDS(on) Gate Threshold Voltage Temperature Coefficient Static Drain–Source On–Resistance ID = –250 µA, Referenced to25°C ID(on) On–State Drain Current VGS = –4.5 V, ID = –3.5 A VGS = –2.5 V, ID = –2.7 A VGS=–4.5 V, ID =–3.5A, TJ=125°C VGS = –4.5 V, VDS = –5 V gFS Forward Transconductance VDS = –5 V, ID = –3.5A 13.2 VDS = –10 V, f = 1.0 MHz V GS = 0 V, 1030 pF 280 pF 120 pF –0.6 –1.0 3 36 56 49 mV/°C 45 75 72 –15 mΩ A S Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Switching Characteristics td(on) Turn–On Delay Time tr Turn–On Rise Time (Note 2) VDD = –5 V, VGS = –4.5 V, ID = –1 A, RGEN = 6 Ω 11 20 ns 18 32 ns td(off) Turn–Off Delay Time 34 55 ns tf Turn–Off Fall Time 34 55 ns Qg Total Gate Charge 9.7 16 nC Qgs Gate–Source Charge Qgd Gate–Drain Charge VDS = –5V, VGS = –4.5 V ID = –3.5 A, 2.2 nC 2.4 nC Drain–Source Diode Characteristics and Maximum Ratings IS Maximum Continuous Drain–Source Diode Forward Current VSD Drain–Source Diode Forward Voltage Gate–Body Leakage, Reverse IGSSR VGS = 0 V, VGS = 12 V, IS = –1.25 A (Note 2) –0.6 VDS = 0 V –1.25 A –1.2 V 100 nA Schottky Diode Characteristics IR VF CT Reverse Leakage Forward Voltage Junction Capacitance VR = 20V IF = 1A TJ=25°C 0.6 50 µA TJ=125°C 1 8 mA TJ=25°C 0.48 0.55 V TJ=125°C 0.42 0.50 VR = 10V 50 V pF Notes: 1. RθJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the drain pins. RθJC is guaranteed by design while RθCA is determined by the user's board design. RθJA is 115 °C/W for the MOSFET and 130°C/W for the Schottky Diode when mounted on a minimum pad. 2. Pulse Test: Pulse Width < 300µs, Duty Cycle < 2.0% FDW6923 Rev. D1 (W) FDW6923 Electrical Characteristics FDW6923 Typical Characteristics 1.6 30 VGS = -4.5V -4.0V 24 -3.5V -3.0V VGS = -2.5V 1.4 18 -3.0V 1.2 -2.5V 12 -3.5V -2.0V 6 -4.0V 1 0 -4.5V 0.8 0 1 2 3 4 5 0 5 10 -VDS, DRAIN-SOURCE VOLTAGE (V) 15 20 25 30 - ID, DRAIN CURRENT (A) Figure 1. On-Region Characteristics. Figure 2. On-Resistance Variation with Drain Current and Gate Voltage. 1.6 0.15 ID = -3.5A VGS = -4.5V ID = -1.7A 1.4 0.12 1.2 0.09 1 0.06 0.8 0.03 o TA = 125 C o TA = 25 C 0 0.6 -50 -25 0 25 50 75 100 125 150 1.5 2 2.5 o 3 3.5 4 4.5 5 -VGS, GATE TO SOURCE VOLTAGE (V) TJ, JUNCTION TEMPERATURE ( C) Figure 3. On-Resistance Variation with Temperature. Figure 4. On-Resistance Variation with Gate-to-Source Voltage. 100 30 VGS = 0V o TA = -55 C VDS = -5V o 25 C 10 24 o o 125 C TA = 125 C 1 18 o 25 C 0.1 o -55 C 12 0.01 6 0.001 0.0001 0 0.4 1.3 2.2 3.1 -VGS, GATE TO SOURCE VOLTAGE (V) Figure 5. Transfer Characteristics. 4 0 0.2 0.4 0.6 0.8 1 1.2 1.4 -VSD, BODY DIODE FORWARD VOLTAGE (V) Figure 6. Body Diode Forward Voltage Variation with Source Current and Temperature. FDW6923 Rev. D1(W) FDW6923 Typical Characteristics 1800 5 ID = -3.5A VDS = -5V f = 1MHz VGS = 0 V 1500 -10V 4 -15V 1200 CISS 3 900 2 600 COSS 1 300 CRSS 0 0 0 3 6 9 0 12 5 10 Figure 7. Gate Charge Characteristics. 20 Figure 8. Capacitance Characteristics. 10 0.01 TJ = 125o C 0.001 1 IR , REVERSE CURRENT (A IF, FORWARD CURRENT (A) 15 -VDS, DRAIN TO SOURCE VOLTAGE (V) Qg, GATE CHARGE (nC) o TJ = 100 C 0 .1 o TJ = 25 C 0 .0 1 0.0001 0.00001 TJ = 25 o C 0.000001 0.0000001 0.00000001 0 .0 0 1 0 0 .2 0 .4 0 .6 0 .8 1 0 1 .2 5 10 15 20 V F, F O R W AR D V O LT AG E (V ) V R , REV ERSE V OLTA GE (V ) Figure 9. Schottky Diode Forward Voltage. Figure 10. Schottky Diode Reverse Current. 1 D = 0.5 R θJA(t) = r(t) + R θ JA R θ JA = 135 °C/W 0.2 0.1 0.1 0.05 P(pk) 0.02 t1 0.01 t2 T J - T A = P * R θ JA(t) Duty Cycle, D = t1 / t2 0.01 SINGLE PULSE 0.001 0.0001 0.001 0.01 0.1 1 10 100 1000 t1, TIME (sec) Figure 11. Transient Thermal Response Curve. Thermal characterization performed using the conditions described in Note 1. Transient thermal response will change depending on the circuit board design. FDW6923 Rev. D1 (W) TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidianries, and is not intended to be an exhaustive list of all such trademarks. FPS™ F-PFS™ FRFET® Global Power ResourceSM Green FPS™ Green FPS™ e-Series™ GTO™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ MotionMax™ Motion-SPM™ OPTOLOGIC® OPTOPLANAR® Build it Now™ CorePLUS™ CorePOWER™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK® EfficentMax™ EZSWITCH™ * ™ ® tm Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FlashWriter® * ® tm PDP SPM™ Power-SPM™ PowerTrench® Programmable Active Droop™ QFET® QS™ Quiet Series™ RapidConfigure™ Saving our world, 1mW at a time™ SmartMax™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SuperMOS™ SyncFET™ ® The Power Franchise® tm TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ UHC® Ultra FRFET™ UniFET™ VCX™ VisualMax™ * EZSWITCH™ and FlashWriter® are trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation’s Anti-Counterfeiting Policy. Farichild’s Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufactures of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed application, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Farichild strongly encourages customers to purchase Farichild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild’s quality standards for handing and storage and provide access to Farichild’s full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address and warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Farichild is committed to committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I35