ANADIGICS ACA2402 750/870/1000 mhz catv push-pull line amplifier Datasheet

ACA2402
750/870/1000 MHz CATV
Push-Pull Line Amplifier
Data Sheet - Rev 2.2
FEATURES
•
1 GHz Specified Performance
•
22 dB Gain
•
Very Low Distortion
•
Excellent 75 Ω Input and Output Match
•
Stable with High VSWR Load Conditions
•
Monolithic Design for Consistent Performance
Part-to-Part
•
Low DC Power Consumption
•
Surface Mount Package Compatible with
Automatic Assembly
•
Low Cost Alternative to Hybrids
•
Meets Cenelec Standards
•
Materials set consistent with RoHS Directives.
S7 Package
16 Pin Wide Body SOIC
with Heat Slug
APPLICATIONS
•
CATV Line Amplifiers, System Amplifiers,
Distribution Nodes
PRODUCT DESCRIPTION
The ACA2402 is a highly linear, monolithic GaAs RF
amplifier that has been developed as an alternative
to standard CATV hybrid amplifiers. Offered in a
convenient surface mount package, the MMIC consists
of two pairs of parallel amplifiers that are optimized
for exceptionally low distortion and noise figure. A
RF Input
hybrid equivalent that provides flat gain response and
excellent input and output return loss over the 40 to
1000 MHz CATV downstream band is formed when
one ACA2402 is cascaded between two appropriate
transmission line baluns.
1A
2A
1B
2B
ACA2402
Figure 1: Hybrid Application Diagram
12/2008
RF Output
ACA2402
1
GND
GND
16
2
2A IN
1A OUT
15
3
GND
Bias 1A
14
4
1A IN
2A OUT
13
5
1B IN
2B OUT
12
6
I SET
Bias 1B
11
7
2B IN
1B OUT
10
8
GND
GND
9
Figure 2: Pin Out
Table 1: Pin Description
2
PIN
NAME
DESCRIPTION
PIN
NAME
DESCRIPTION
1
GND
Ground
16
GND
Ground
2
2AIN
Amplifier 2A Input
15
1AOUT
Amplifier 1A Output
3
GND
Ground
14
Bias 1A
Bias for 1A Amplifier
4
1AIN
Amplifier 1A Input
13
2AOUT
Amplifier 2A Output and Supply
5
1BIN
Amplifier 1B Input
12
2BOUT
Amplifier 2B Output and Supply
6
1SET
Current Adjust
11
Bias 1B
Bias for 1B Amplifier
7
2BIN
Amplifier 2B Input
10
1BOUT
Amplifier 1B Output
8
GND
Ground
9
GND
Ground
Data Sheet - Rev 2.2
12/2008
ACA2402
ELECTRICAL CHARACTERISTICS
Table 2: Absolute Mimimum and Maximum Ratings
PARAMETER
MIN
MAX
UNIT
Supply (pins 12, 13)
0
+28
VDC
RF Power at Inputs (pins 4, 5)
-
+75
dBmV
-65
+150
°C
Soldering Temperature
-
+260
°C
Soldering Time
-
5.0
Sec
Storage Temperature
Stresses in excess of the absolute ratings may cause permanent damage.
Functional operation is not implied under these conditions. Exposure
to absolute ratings for extended periods of time may adversely affect
reliability.
Notes:
1. Pins 2, 4, 5 and 7 should be AC-coupled. No external DC bias should be
applied.
2. Pin 6 should be AC-grounded and/or pulled to ground through a resistor for
current control. No external DC bias should be applied.
3. Pins 11 and 14 are bias feeds for input amplifiers 1A and 1B. No external
DC bias should be applied.
4. Pins 10 and 15 receive DC bias directly from pins 11 and 14. No other
external bias should be applied.
Table 3: Operating Ranges
PARAMETER
MIN
TYP
MAX
UNIT
-
+24
-
VDC
RF Frequency
40
-
1000
MHz
Case Temperature
-40
-
+110
°C
Supply: VDD (pins 12, 13)
The device may be operated safely over these conditions; however, parametric
performance is guaranteed only over the conditions defined in the electrical
specifications.
Data Sheet - Rev 2.2
12/2008
3
ACA2402
Table 4: AC and DC Electrical Specifications
(Ta = +25 °C, Vdd = +24 VDC)
PARAMETER
MIN
TYP
MAX
UNIT
Gain @ 1000 MHz (1)
21.1
21.6
22.1
dB
Cable Equivalent Slope (1)
-
0
-
dB
Gain Flatness (1) @ 1000 MHz
-
0.2
-
dB
Noise Figure
-
3.5
4.5
dB
CTB (1)
77 Channels (2)
77 Channels plus QAM to 1 GHz (6)
110 Channels (3)
110 Channels plus QAM to 1 GHz (7)
128 Channels (4)
-
-76
-73
-70
-74
-74
-71
-71
-
CSO (1)
77 Channels (2)
77 Channels plus QAM to 1 GHz (6)
110 Channels (3)
110 Channels plus QAM to 1 GHz (7)
128 Channels (4)
-
-72
-72
-69
-70
-70
-70
-68
-
XMOD (1)
77 Channels (2)
77 Channels plus QAM to 1 GHz (6)
110 Channels (3)
110 Channels plus QAM to 1 GHz (7)
128 Channels (4)
-
-65
-65
-62
-63
-63
-63
-63
-
18
22
-
dB
240
250
260
mA
-
-
3.8
(1)
Return Loss (Input/Output) (1)
Supply Current (5)
Thermal Resistance
dBc
dBc
dBc
C/W
O
Notes:
(1) Measured with baluns on the input and output of the device.
(2) Parts measured with 77 channels flat output, +42 dBmV per channel.
(3) Parts measured with 110 channels flat output, +40 dBmV per channel.
(4) Parts measured with 128 channels flat output, +40 dBmV per channel.
(5) The supply current may be reduced by decreasing the value of R3 (see Figure 17)
(6) 47.5 dBmV output, 9.5 dB tilt @ 1 GHz
(7) 45.5 dBmV output, 9.5 dB tilt @ 1 GHz
8. All specifications as measured on Evaluation Board (see Figures 16 & 17).
4
Data Sheet - Rev 2.2
12/2008
COMMENTS
75  system
ACA2402
PERFORMANCE DATA
Figure 3: Noise Figure vs Frequency
5
Noise Figure (dB)
4.5
4
3.5
3
2.5
2
0
100
200
300
400
500
600
700
800
900
1000
Frequency (MHz)
Figure 4: Gain (S21) vs. Frequency
Data Sheet - Rev 2.2
12/2008
5
ACA2402
Figure 5: Input and Output Return Loss (S11 and S22) vs. Frequency
5
0
S11
S22
-5
S22 (dB)
-10
-15
-20
-25
-30
-35
-40
0
100
200
300
400
500
600
700
800
900
Frequency (MHz)
Figure 6: Isolation (S12) vs. Frequency
6
Data Sheet - Rev 2.2
12/2008
1000
1100
1200
ACA2402
Figure 7: CTB vs. Output Power at Worst-case Channel/Frequency
(128 total channels, 110 analog channels, flat output)
Figure 8: CSO vs. Output Power at Worst-case Channel/Frequency
(128 total channels, 110 analog channels, flat output)
Figure 9: XMOD vs. Output Power at Worst-case Channel/Frequency
(128 total channels, 110 analog channels, flat output)
Data Sheet - Rev 2.2
12/2008
7
ACA2402
Figure 10: CTB vs. Frequency (110 channels, +40 dBmV power, flat output)
-50
-55
-60
CTB (dBc)
-65
-70
-75
-80
-85
-90
-95
-100
0
100
200
300
400
500
600
700
800
Frequency (MHz)
Figure 11: CSO vs. Frequency (110 channels, +40 dBmV power, flat output)
-50
-55
-60
CSO (dBc)
-65
-70
-75
-80
-85
-90
-95
-100
0
100
200
300
400
500
600
700
800
Frequency (MHz)
Figure 12: XMOD vs. Frequency (110 channels, +40 dBmV power, flat output)
-50
-55
-60
XMOD (dBc)
-65
-70
-75
-80
-85
-90
-95
-100
0
100
200
300
400
500
Frequency (MHz)
8
Data Sheet - Rev 2.2
12/2008
600
700
800
ACA2402
Figure 13: CTB vs. Frequency (77 channels, +42 dBmV power, flat output)
-50
-55
-60
CTB (dBc)
-65
-70
-75
-80
-85
-90
-95
-100
0
100
200
300
400
500
Frequency (MHz)
600
Figure 14: CSO vs. Frequency (77 channels, +42 dBmV power, flat output)
-50
-55
CSO (dBc)
-60
-65
-70
-75
-80
-85
-90
-95
-100
0
100
200
300
400
500
600
Frequency (MHz)
Figure 15: XMOD vs. Frequency (77 channels, +42 dBmV power, flat output)
-50
-55
XMOD (dBc)
-60
-65
-70
-75
-80
-85
-90
-95
-100
0
100
200
300
400
500
600
Frequency (MHz)
Data Sheet - Rev 2.2
12/2008
9
ACA2402
APPLICATION INFORMATION
Figure 16: Evaluation Board Layout
Notes:
1. Via holes should be 35 mils (0.89 mm) in diameter, and plated to 1 mil (0.025 mm) thickness. They need not be solderfilled.
2. WARNING: Due to the power dissipation of this device, the printed circuit board should be mounted/attached
to a heat sink.
3. More assembly details, such as via hole diameters, via spacing, solder paste application, and soldering recommendations are provided in the application note entitled, “Thermal Management of ANADIGICS’ Surface Mounted Amplifiers”.
Figure 17: Evaluation Board Schematic
10
Data Sheet - Rev 2.2
12/2008
ACA2402
Table 5: Evaluation Board Parts List
REF
DESCRIPTION
C1, C2, C3, C6,
C7, C10, C14
0.01 F CHIP CAP
C4, C5, C8, C9
QTY
VENDOR
VENDOR P/N
7
MURATA
GRM39X7R103K50V
470 pF CHIP CAP
4
MURATA
GRM39X7R471K50V
C12, C13
1.0 pF CHIP CAP
2
MURATA
GRM36COG1R0C50
C15
47 F ELECT. CAP
1
DIGI-KEY CORP
P5275-ND
R1, R2, C11
NOT USED
R3
18 k RESISTOR
1
DIGI-KEY CORP
P18KGCT-ND
TVS
TVS 24 VOLT 600
WATT
1
DIGI-KEY CORP
SMBJ24ACCCT-ND
L1, L2, L3, L4 (3)
680 nH INDUCTOR
4
COILCRAFT
1008CS-681XKBC
CONNECTOR (1)
75  N MALE PANEL
MOUNT
2
PASTERNACK
ENTERPRISES
PE4504
Ferrite Core
2
FAIR-RITE
2843002702
MWS WIRE IND.
T-2361429-20
T1, T2 (2)
(BALUN)
INDIUM
Wire
Printed Circuit Board
1
STANDARD
PRINTED CIRC. INC
24VX1AC50
300 X 160 MILS
1
INDIUM CORP OF
AMERICA
14996Y
Notes:
(1) N connector center pin should be approximately 80 mils in length.
(2) T1, T2 balun: 5.5 turns thru, as shown in Figure 18.
(3) 200 mA minimum current rating.
Figure 18: Balun Drawing
Data Sheet - Rev 2.2
12/2008
11
ACA2402
PACKAGE OUTLINE
Figure 19: S7 Package Outline - 16 Pin Wide Body SOIC with Heat Slug
12
Data Sheet - Rev 2.2
12/2008
ACA2402
ORDERING INFORMATION
ORDER NUMBER
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
COMPONENT PACKAGING
ACA2402S7TR
-40 to 110 oC
16 Pin Wide Body
SOIC with Heat Slug
1,500 piece tape and reel
ACA2402RS7P2
-40 to 110 oC
RoHS-Compliant
16 Pin Wide Body
SOIC with Heat Slug
1,500 piece tape and reel
ACA2402S7P0
-40 to 110 oC
16 Pin Wide Body
SOIC with Heat Slug
Plastic tubes (50 pieces per tube)
ACA2402RS7P0
-40 to 110 oC
RoHS-Compliant
16 Pin Wide Body
SOIC with Heat Slug
Plastic tubes (50 pieces per tube)
ANADIGICS, Inc.
141 Mount Bethel Road
Warren, New Jersey 07059, U.S.A.
Tel: +1 (908) 668-5000
Fax: +1 (908) 668-5132
URL: http://www.anadigics.com
E-mail: [email protected]
IMPORTANT NOTICE
ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice.
The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to
change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed
to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to
verify that the information they are using is current before placing orders.
warning
ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product
in any such application without written consent is prohibited.
13
Data Sheet - Rev 2.2
12/2008
Similar pages