MA-COM DS52-0008 Low cost two-way gmic smt power divider 824 - 960 mhz Datasheet

DS52-0008
Low Cost Two-Way GMIC SMT Power Divider
824 – 960 MHz
Rev. V2
Features
•
•
•
•
•
•
Small Size and Low Profile
Industry Standard SOT-26 SMT Plastic Package
Typical Insertion Loss: 0.6 dB
Typical Isolation: 15 dB
1 Watt Power Handling
SOT-26 Package
Description
M/A-COM’s DS52-0008 is an IC-based monolithic
power divider using M/A-COM’s GMIC technology in
a low cost SOT-26
plastic package. This 2-way
power divider is ideally suited for
applications
where small size, low insertion loss, superior phase/
amplitude tracking and low cost are required. Typical
applications
include personal communication
systems and other communication applications
where size and PCB real estate are at a premium.
Available in tape and reel.
The DS52-0008 is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and
reliability.
Functional Diagram
RF 1
GND
GND
RF IN
RF 2
GND
Pin Configuration
Pin No.
Function
Pin No.
Function
1
RF1
4
GND
2
GND
5
RF IN
3
RF2
6
GND
Ordering Information
Part Number
Package
DS52-0008
Bulk Packaging
DS52-0008-TR
1000 piece reel
Note: Reference Application Note M513 for reel size
information.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
DS52-0008
Low Cost Two-Way GMIC SMT Power Divider
824 – 960 MHz
Rev. V2
Electrical Specifications: TA = 25°C1
Parameter
Units
Min
Typ
Max
Insertion Loss Above 3.0 dB
dB
—
0.6
0.8
Isolation
dB
13
15
—
VSWR Input
RF1, RF2 Outputs
—
—
—
—
1.3:1
1.3:1
1.4:1
1.5:1
Amplitude Balance
dB
—
0.1
0.25
Deg.
—
3
5
Phase Balance
1. All specifications apply with a 50-ohm source and load impedance.
Absolute Maximum Ratings
Parameter
Input Power
4
Operating Temperature
2.
3.
4.
2,3
Recommended PCB Configuration
Absolute Maximum
1W CW
-40°C to +85°C
Exceeding any one or combination of these limits may cause
permanent damage to this device.
M/A-COM does not recommend sustained operation near
these survivability limits.
With internal load dissipation of 0.125 W maximum.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
GMIC Circuits are sensitive to electrostatic
discharge (ESD) and can be damaged by static
electricity. Proper ESD control techniques should
be used when handling these devices.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
DS52-0008
Low Cost Two-Way GMIC SMT Power Divider
824 – 960 MHz
Rev. V2
Typical Performance Curves @ 25ºC
Insertion Loss vs. Frequency
(Dashed lines show amplitude balance window)
VSWR vs. Frequency
q
VSWR
Insertion Loss dB
-0.5
-0.75
1.6
1.4
1.2
858
892
926
1
824
960
Isolation vs. Frequency
892
926
960
926
960
Phase Balance vs. Frequency
(Relative to RF1)
0
0
Phase, degrees
Isolation dB
858
Frequency MHz
Frequency MHz
-5
-10
-15
-20
824
Input
Output
1.8
-0.25
-1
824
y
2
0
-2
-4
-6
-8
-10
824
858
892
926
960
858
892
Frequency MHz
Frequency MHz
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
DS52-0008
Low Cost Two-Way GMIC SMT Power Divider
824 – 960 MHz
Rev. V2
SOT-26†
†
Reference Application Note M538 for lead-free solder reflow
recommendations.
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
Similar pages