ISSUED DATE :2005/04/29 REVISED DATE : G5M 2163 C M O S P o s i t i v e Vo l t a g e R e g u l a t o r Description The G5M2163 series of positive, linear regulators feature low quiescent current (30 A typ.) with low dropout voltage, making them ideal for battery applications. These rugged devices have both Thermal Shutdown, and Current Fold-back to prevent device failure under the “Worst” of operating conditions. In applications requiring a low noise, regulated supply, place a 1000pF capacitor between Bypass and Ground. The G5M2163 is stable with an output capacitance of 2.2 F or greater. Features Very Low Dropout Voltage Guaranteed 300mA output Over-Temperature Shutdown Current Limiting Short Circuit Current Fold-back Highly Accurate± 1.5% Noise Reduction Bypass Capacitor Power-saving Shutdown Mode Factor Pre-set Output Voltage Functional Block Diagram Applications Battery Powered Widgets Instrumentation Wireless Devices PC Peripherals Portable Electronics Cordless Phones Electronic Scales Package Dimensions REF. A B C D E F Millimeter Min. Max. 4.40 4.60 4.05 4.25 1.50 1.70 1.30 1.50 2.40 2.60 0.80 - REF. G H I J K L Dimensions Millimeter 3.00 REF. 1.50 REF. 0.40 0.52 1.40 1.60 0.35 0.41 5 TYP. Typical Application Circuit 1/7 ISSUED DATE :2005/04/29 REVISED DATE : Absolute Maximum Ratings Parameter Input Max Voltage Output Current Output Voltage Operating Ambient Temperature Junction Temperature Maximum Junction Temperature Thermal Resistance Power Dissipation( T=100 ) EDS Classification Electrical Characteristics Ta=25 Parameter Symbol Ratings Unit VIN IOUT VOUT Topr Tj Tj Max jc ja PD 8 PD/( VIN- VO) 1.5~5.0 -40 ~ +85 -40 ~ +125 150 38 180 550 B V mA V /W /W mW unless otherwise noted Symbol Condition Min Output Voltage VOUT (E) VIN=VOUT(T)+2V, IO=1mA -1.5% (Note1) VIN=VOUT(T)+2V, IO=300mA -2.5% Output Current Current Limit Load Regulation IO ILIM REGLOAD VIN=VOUT(T)+2V, VOUT VOUT(E)*0.96 300 - - mA VIN=VOUT(T)+2V, VO>1.2V 300 450 - mA VIN=VOUT(T)+2V, IO=1mA to 300mA -1 0.2 1 % 1.2V VOUT(T) 2.0V IO=300mA VO=VOUT(E)-2% 2.0V<VOUT(T) 2.8V - - 1300 - - 400 - - 300 - 30 50 A - 35 - A Dropout Voltage VDROPOUT 2.8V<VOUT(T) Quiescent Current Ground Pin Current IQ VIN= VOUT(T)+1V, IO=0mA IGND VIN= VOUT(T)+2V, IO=1mA~300mA 1.2V VOUT(T) Line Regulation REGLINE 1.4V IO=1mA VIN=VOUT(T)+1 to 1.4V<VOUT(T) 2.0V VOUT(T)+2 2.0V<VOUT(T)<4 4.0V VOUT(T) Input Voltage Over Temperature Shutdown Over Temperature Hysterisis Output Voltage Temperature Coefficient Short Circuit Current(Note4) Power Supply Rejection Output Voltage Noise EN Input Threshold EN Input Bias Current Shutdown Supply Current Shutdown Output Voltage TYP Max Unit VOUT(T) 1.5% V 2.5% V (Note2) -0.2 - 0.2 -0.15 - 0.15 -0.1 0.02 0.1 mV % -0.4 0.2 0.4 VIN OTS OTH Note3 - 7 - 150 - - 30 - TC - 30 - VIN=VOUT(T)+1V, VOUT<0.8V - 150 300 f=100Hz - 60 - f=1kHz f=10kHz - 50 20 - dB - 30 - Vrms 2.0 0 - VIN 0.4 V V ISC PSRR eN VEH VEL IEH IEL ISD VO,SD Io=100mA Co=2.2 F f=10Hz~100kHz Co=2.2 F Io=10mA VIN=2.7V to 7V VIN=2.7V to 7V V ppm/ mA VEN=VIN, VIN=2.7V to 7V - - 0.1 A VEN= 0V, VIN=2.7V to 7V VIN=5V, VO=0V, VEN<VEL - 0.5 0.5 1 A A Io=0.4mA, VEN<VEL 0 - 0.4 V Note 1: VOUT (E) =Effective Output Voltage (i.e. the output voltage when “VOUT (T) + 2.0V” is provided at the VIN pin while maintaining a certain IOUT value). 2: VOUT (T) =Specified Output Voltage 3: VIN (MIN) =VOUT+VDROPOUT 4: To prevent the Short Circuit Current protection feature from being prematurely activated, the input voltage must be applied before a current source load is applied. 2/7 ISSUED DATE :2005/04/29 REVISED DATE : Ordering Information ( contd. ) Part Number G5M2163-15 G5M2163-20 G5M2163-27 G5M2163-28 G5M2163-30 G5M2163-33 G5M2163-35 G5M2163-37 G5M2163-50 Marking 3F152 XXXX 3F202 XXXX 3F272 XXXX 3F282 XXXX 3F302 XXXX 3F332 XXXX 3F352 XXXX 3F372 XXXX 3F502 XXXX Output Voltage Part Number 1.5V G5M2163-18 2.0V G5M2163-25 2.7V G5M2163-2H 2.8V G5M2163-29 3.0V G5M2163-31 3.3V G5M2163-34 3.5V G5M2163-36 3.7V G5M2163-38 Marking 3F182 XXXX 3F252 XXXX 3F2H2 XXXX 3F292 XXXX 3F312 XXXX 3F342 XXXX 3F362 XXXX 3F382 XXXX Output Voltage 1.8V 2.5V 2.85V 2.9V 3.1V 3.4V 3.6V 3.8V 5.0V Characteristics Curve 3/7 ISSUED DATE :2005/04/29 REVISED DATE : 4/7 ISSUED DATE :2005/04/29 REVISED DATE : 5/7 ISSUED DATE :2005/04/29 REVISED DATE : 6/7 ISSUED DATE :2005/04/29 REVISED DATE : Detailed Description The G5M2163 series of COMS regulators contain a PMOS pass transistor, voltage reference, error amplifier, over-current protection, and thermal shutdown. The P-channel pass transistor receives data from the error amplifier, over-current shutdown, and thermal protection circuits. During normal operation, the error amplifier compares the output voltage to a precision reference. Over-current and Thermal shutdown circuits become active when the junction temperature exceeds 150 , or the current exceeds 300mA. During thermal shutdown, the output voltage remains low. Normal operation is restored when the junction temperature drops below 120 . The G5M2163 switches from voltage mode to current mode when the load exceeds the rated output current. This prevents over-stress. The G5M2163 also incorporates current fold-back to reduce power dissipation when the output is short circuited. This feature becomes active when the output drops below 0.8 volts, and reduces the current flow by 65%. Full current is restored when the voltage exceeds 0.8 volts. External Capacitors The G5M2163 is stable with an output capacitance to ground of 2.2 F or greater. Ceramic capacitors have the lowest ESR, and will offer the best AC performance. Conversely, Aluminum Electrolytic capacitors exhibit the highest ESR, resulting in the poorest AC response. Unfortunately, large value ceramic capacitors are comparatively expensive. One option is to parallel a 0.1 F ceramic capacitor with a 10 F Aluminum Electrolytic. The benefit is low ESR, high capacitance, and low overall cost. A second capacitor is recommended between the input and ground to stabilize Vin. The input capacitor should be at least 0.1 F to have a beneficial effect. A third capacitor can be connected between the BY-PASS pin and GND. This capacitor can be a low cost Polyester Film variety between the value of 0.001~0.01 F. A large capacitor improves the AC ripple rejection, but also makes the output come up slowly. This “Soft” turn-on is desirable in some applications to limit turn-on surges. All capacitors should be placed in close proximity to the pins. A “Quiet” ground termination is desirable. This can be achieved with a “Star” connection. Enable The Enable pin normally floats high. When actively, pulled low, the PMOS pass transistor shuts off, and all internal circuits are powered down. In this state, the quiescent current is less than 1 A. This pin behaves much like an electronic switch. Important Notice: All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of GTM. GTM reserves the right to make changes to its products without notice. GTM semiconductor products are not warranted to be suitable for use in life-support Applications, or systems. GTM assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. Head Office And Factory: Taiwan: No. 17-1 Tatung Rd. Fu Kou Hsin-Chu Industrial Park, Hsin-Chu, Taiwan, R. O. C. TEL : 886-3-597-7061 FAX : 886-3-597-9220, 597-0785 China: (201203) No.255, Jang-Jiang Tsai-Lueng RD. , Pu-Dung-Hsin District, Shang-Hai City, China TEL : 86-21-5895-7671 ~ 4 FAX : 86-21-38950165 7/7