ISM95 Series 2.0 mm x 2.5 mm Ceramic Package SMD Oscillator, TTL / HC-MOS Product Features: Applications: Low Jitter, Non-PLL Based Output CMOS/TTL Compatible Logic Levels Compatible with Leadfree Processing Fibre Channel Server & Storage Sonet /SDH 802.11 / Wifi T1/E1, T3/E3 System Clock 2.5 2.0 Frequency 1.000 MHz to 60.000 MHz Output Level HC-MOS TTL Duty Cycle ‘0’ = 0.1 Vcc Max., ‘1’ = 0.9 Vcc Min. ‘0’ = 0.4 VDC Max., ‘1’ = 2.4 VDC Min. Specify 50% ±10% or ±5% See Table in Part Number Guide Rise / Fall Time 5 nS Max. @ Vcc = +3.3 VDC, 10 nS Max. @ Vcc = +5 VDC *** Output Load Fo < 50 MHz = 10 TTL, Fo > 50 MHz = 5 LSTTL See Table in Part Number Guide See Frequency Stability Table (Includes room temperature tolerance and stability over operating temperature) 10 mS Max. Frequency Stability Start-up Time Enable / Disable Time Supply Voltage 100 nS Max. N.C. or ≥ 70% Vdd = Enable. ≤ 30% Vdd = Disable. Current 25 mA Max. *** Operating See Operating Temperature Table in Part Number Guide Storage -55° C to +125° C Jitter: RMS(1sigma) 1 MHz-60 MHz 5 pS RMS (1 sigma) Max. accumulated jitter (20K adjacent periods) 0.6 Recommended Pad Layout See Input Voltage Table, tolerance ±5 % Max Integrated 1 MHz-60 MHz 1.5 pS RMS (1 sigma -12KHz to 20MHz) Max Total Jitter 1 MHz-60 MHz 50 pS p-p (100K adjacent periods) Part Number Guide Package Input Voltage ISM95 - Sample Part Number: Symmetry (Duty Cycle) 5 = 5.0 V 1 = 0° C to +70° C 5 = 45 / 55 Max. 3 = 3.3 V 8 = -10° C to +60° C 6 = 40 / 60 Max. 7 = 3.0 V 6 = -10° C to +70° C 2 = 2.7 V 3 = -20° C to +70° C 6 = 2.5 V 4 = -30° C to +75° C 2 = -40° C to +85° C Connection Enable GND Output Vcc Dimension Units: mm Operating Temperature 1 = 1.8 V* Pin 1 2 3 4 ISM95 - 3251BH - 20.000 Output 1 = 10TTL / 15 pF HC-MOS Stability (in ppm) Enable / Disable **A = ±25 H = Enable 6 = 30 pF B = ±50 5 = 50 pF HC-MOS (<40 MHz) C = ±100 O = N/C NOTE: A 0.01 µF bypass capacitor is recommended between Vcc (pin 4) and GND (pin 2) to minimize power supply noise. * Not available at all frequencies. ** Not available for all temperature ranges. *** Frequency, supply, and load related parameters. ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com 06/09_A Specifications subject to change without notice Page 1 Frequency - 20.000 MHz ISM95 Series 2.0 mm x 2.5 mm Ceramic Package SMD Oscillator, TTL / HC-MOS Pb Free Solder Reflow Profile: Typical Application: *Units are backward compatible with 240C reflow processes Package Information: MSL = N.A. (package does not contain plastic, storage life is unlimited under normal room conditions). Termination = e4 (Au over Ni over W base metalization). Tape and Reel Information: Quantity per Reel A B C D E F 1000 8 +/-.3 4 +/-.2 3.5 +/-.2 9 +/-1 or 12 +/-.3 60 / 80 180 Environmental Specifications Thermal Shock Moisture Resistance Mechanical Shock Mechanical Vibration Resistance to Soldering Heat Hazardous Substance Solderability Terminal Strength Gross Leak Fine Leak Solvent Resistance MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2007, Condition A J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max) Pb-Free / RoHS / Green Compliant JESD22-B102-D Method 2 (Preconditioning E) MIL-STD-883, Method 2004, Test Condition D MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s MIL-STD-202, Method 215 Marking Line 1: ILSI and Date Code (YWW) Line 2: Frequency ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com 06/09_A Specifications subject to change without notice Page 2