Hirose DF1B-9S-2.5R 2.5mm pitch connector for discrete wire connection (product compliant with ul/csa standard) Datasheet

2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
DF1B Series
■Features
1. New Insulation Displacement and Crimping Ideas
This connector is a new type to insert the ID contacts in the case. Using this
method, the following merits can be gained.
Cables with different current capacities
can be mixed in one case
ID terminal (24, 26, 28AWG)
Crimping contact (20 to 30AWG)
1 By using the ID contact and crimping contact together, different current
capacity cables can be mixed in one case.
2 After connection, the contact can be replaced in excellent maintainability.
3 Because the insulation displacement area is protected by the case, high
reliability can be assured.
4 Since the insulation displacement process can be performed only by
replacing the applicator of the existing crimping machine, no expensive
machine for insulation displacement is required.
2. Potting Header Available
Fig.1
Potting status
The high profile header is also available, corresponding to the board potting
process (sealed with resin) as waterproof measures.
3. Broad Variations
The single row and double row contacts are aligned for "Board to Cable" and
"In-line" series, respectively, while standard tin and gold plating products are
available.
(Refer to the applicable combination pattern on next page.)
■Applications
Fig.2
Business equipment, particularly including the copy machine and printer
B183
DF1B Series●2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
BApplicable Combination
K Single Row Type
Socket (Cable Side)
DF1B-*S-2.5R
Straight Through hole Type
Pin header
DF1B(Z)-*P-2.5DSA
Right angle Through hole Type
Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
Pin header
DF1B(Z)-*P-2.5DS
Panel Mount Type
In-line plug (Cable side)
DF1BA-*EP-2.5RC
K Double Row Type
Socket (Cable Side)
DF1B-*DS-2.5RC
Straight Through hole Type
Pin header
DF1B(Z)-*DP-2.5DSA
Right angle Through hole Type
Pin header
DF1B(Z)-*DP-2.5DS
Panel Mount Type
In-line plug (Cable side)
DF1BA-*DEP-2.5RC
In-line Connection Product (Cable to Cable Connection) : Full Lock Type
K Single Row Type
Socket (Cable Side)
DF1B-*ES-2.5RC
In-line plug (Cable side)
DF1B-*EP-2.5RC
K Double Row Type
Socket (Cable Side)
DF1B-*DES-2.5RC
B184
In-line plug (Cable side)
DF1B-*DEP-2.5RC
DF1B Series●2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
■Product Specifications
Current rating
Rating
Cable Size
(Note1)
Voltage rating
20 to 24AWG : 3A
Operating Temperature Range
-35 to +85ç (Note2)
26AWG
: 2A
Operating Humidity Range
-40 to 80%
28AWG
: 1A
30AWG
: 0.5A
Storage Temperature Range
-10 to +60ç (Note3)
Storage Humidity Range
-40 to 70% (Note3)
250V AC
■UL CSA Safety File No.
UL
: E52653
CSA : LR95109
UL-CSA Safety Standard Standardized Value
20 to 22AWG : 3A
Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
Current rating
Rating
Cable Size
(Note1)
24 to 28AWG : 1A
30AWG
Voltage rating
: 0.5A
30V AC
Item
Specification
Condition
1. Insulation Resistance
1000Mø Min
500V DC
2. Withstanding voltage
No flashover or insulation breakdown.
650V AC/1 minute
3. Contact Resistance
30mø Max
100mA
4. Insertor/Extraction Force
MIN0.44N (45gf), MAX4.4N(450gf)
Measure at the square steel pin of 0.635±0.002mm
5. Vibration
No electrical discontinuity of 1μs or more
6. Humidity (Steady state)
7. Temperature Cycle
8. Operating Life
9. Resistance to Soldering heat
Frequency : 10 to 55Hz, single amplitude of 0.75mm,
2 hours in each of the 3 directions.
Contact resistance : 30mø max.
96 hours at temperature of 40±2ç and
Insulation resistance : 1000Mø min.
humidity of 90% to 95%
Contact resistance : 30mø max.
(-55ç : 30 minutes ➝ 5 to 35ç : 10 minutes
Insulation resistance : 1000Mø min.
(-85ç : 30 minutes ➝ 5 to 35ç : 10 minutes) 5 cycles
Tin plating : 30 cycles
Contact resistance : 30mø max.
Gold plating : 50 cycles
No deformation of components affecting performance.
Flow : 250ç for 10 seconds
Manual soldering : 300ç for 3 seconds
Note 1 : Current rating of header is 3A.
Note 2 : Includes temperature rise caused by current flow.
Note 3 : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
■Materials / Finish
Product
Part
Socket
Insulator
Polyamide
White
ID Contact for Socket
Contact
Phosphor copper
Tin plated or gold plated
Crimping Contact for Socket
Pin Header
In-line Plug
Material
Finish
Contact
Phosphor copper
Tin plated or gold plated
Insulator
Polyamide
White
Contact
Brass
Tin plated or gold plated
Insulator
Polyamide
White
Remarks
UL94V-0
––––––
––––––
UL94V-0
––––––
UL94V-0
ID Contact for In-line Plug
Contact
Phosphor copper
Tin plated or gold plated
––––––
Crimping Contact for In-line Plug
Contact
Phosphor copper
Tin plated or gold plated
––––––
B185
DF1B Series●2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
■Product Number Structure
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
KConnector
1
q Series Name
2
3
4
5
6
r Connector Type
: DF 1B
w Style Symbol :
Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
- ＊ S 2.5 RC
DF1B
t Contact Pitch: 2.5mm
y Contact Type
S
: Single row socket
Blank : Standard type
DS
: Double row socket
RC
A
: In-line Plug (Simple Lock type)
P
: Single row pin header
DSA : Straight through hole
D
: Pin header (Potting type)
DP
: Double row pin header
Z
: Pin header (Standard type, Tin plated)
ES
: Single row in-line socket
e Number of Contacts
DS
: ID/crimping socket (Note)
: Right angle through hole
Note : The single row socket DF1B-*S-2.5R
DES
: Double row in-line socket
only adds "R" to the tail, which has
Single Row : 2 to 16, 18, 20
EP
: Single row in-line plug
the same meaning as "RC".
Double Row : 4 to 30, 34, 40
DEP
: Double row in-line plug
KSocket ID Contact
DF1B - R 24 F A
q
w
q 1. Connection Type
e
r
e Packaging Type
R : ID
Blank : Bag
w Applicable Cable Size
F
: Reel
r Plating Type
24 : 24AWG
26 : 26AWG
Blank : Tin plated
28 : 28AWG
A
KPlug ID Contact
: Gold plated
DF1B - 24 P R F
q
w
q Applicable Cable Size
e
r
e Connection Type
R : ID
24 : 24AWG
r Packaging Type
26 : 26AWG
Blank : Bag
28 : 28AWG
w Connector Type
F
: Reel
P : Plug
KCrimping Contact
DF1B - 2428 SCF A
q
q Applicable Cable Size
w
e
e Plating Type
2022 : 20 to 22AWG
Blank : Tin plated
2428 : 24 to 28AWG
A
: Gold plated
B
: Gold plated (Note)
30
: 30AWG
w Packaging Type
Note: In case of the socket contact,
SCF : Socket Contact/Reel
"A" is attached to the tail of
SC
the product name. In case of
: Socket Contact/Bag
PCF : Plug Contact/Reel
the plug contact, "B" is
PC
attached thereto.
: Plug Contact/Bag
Note : Product Numbers of Gold plated Plug Contact for 24 to 28 AWG cable
are DF1-PD2428SCFB(Reel) and DF1-PD2428SCB(Bag).
B186
DF1B Series●2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
■Single Row Socket
Photo: Contact Inserted
Unit: mm
Part No.
HRS No.
No. of Contacts
A
B
Part No.
HRS No.
No. of Contacts
A
DF1B- 2S-2.5R
541-0200-6
2
5
DF1B- 3S-2.5R
541-0201-9
3
7.5
2.5
DF1B-11S-2.5R
541-0209-0
11
27.5
25
5
DF1B-12S-2.5R
541-0210-0
12
30
27.5
DF1B- 4S-2.5R
541-0202-1
4
10
DF1B- 5S-2.5R
541-0203-4
5
12.5
10
7.5
DF1B-13S-2.5R
541-0211-2
13
32.5
30
DF1B-14S-2.5R
541-0212-5
14
35
32.5
DF1B- 6S-2.5R
541-0204-7
6
15
12.5
DF1B-15S-2.5R
541-0213-8
15
37.5
35
DF1B- 7S-2.5R
541-0205-0
7
17.5
15
DF1B-16S-2.5R
541-0214-0
16
40
37.5
DF1B- 8S-2.5R
541-0206-2
8
DF1B- 9S-2.5R
541-0207-5
9
20
17.5
DF1B-18S-2.5R
541-0215-3
18
45
42.5
22.5
20
DF1B-20S-2.5R
541-0216-6
20
50
47.5
DF1B-10S-2.5R
541-0208-8
10
25
22.5
RoHS
Yes
B
RoHS
Yes
Note 1 : The quantity at the specific No."None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
Note 2 : The 2 contact connector contains the convex portion to prevent mis-insertion in the center at one point, which is different from
the above figure. The 3 to 6 contacts connectors have the area at both ends.
■Double Row Socket
Photo: Contact Inserted.
Unit : mm
Part No.
HRS No.
No. of Contacts
Part No.
HRS No.
No. of Contacts
DF1B- 4DS-2.5RC
541-0648-0
4
2.5
DF1B-22DS-2.5RC
541-0606-0
DF1B- 6DS-2.5RC
541-0649-3
6
DF1B- 8DS-2.5RC
541-0650-2
8
10
5
DF1B-24DS-2.5RC
12.5
7.5
DF1B-26DS-2.5RC
DF1B-10DS-2.5RC
541-0600-4
10
15
DF1B-12DS-2.5RC
541-0601-7
12
17.5 12.5
DF1B-14DS-2.5RC
541-0602-0
14
20
DF1B-16DS-2.5RC
541-0603-2
16
22.5 17.5
DF1B-18DS-2.5RC
541-0604-5
18
25
DF1B-20DS-2.5RC
541-0605-8
20
27.5 22.5
A
B
7.5
RoHS
10
15
20
Yes
A
B
22
30
25
541-0607-3
24
32.5
27.5
541-0608-6
26
35
30
DF1B-28DS-2.5RC
541-0609-9
28
37.5
32.5
DF1B-30DS-2.5RC
541-0610-8
30
40
35
DF1B-34DS-2.5RC
541-0612-3
34
45
40
DF1B-36DS-2.5RC
541-0613-6
36
47.5
42.5
DF1B-40DS-2.5RC
541-0615-1
40
52.5
47.5
RoHS
Yes
Note 1 : The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.) If needed, please order the product per bag.
Note 2 : The 4 contact connector contains the convex portion to prevent miss-insertion in the center at one point, which is different
from the above figure.
B187
DF1B Series●2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
■ Single Row Straight Pin Header
B188
+0.1
KBoard Through-hole Diameter:Ø1.1+0
Unit : mm
Tin plated
Gold plated
Part No.
HRS No.
Part No.
HRS No.
No. of Contacts
A
B
DF1BZ- 2P-2.5DSA
541-2000-8
DF1B- 2P-2.5DSA(01)
541-0225-7 01
2
2.5
7.5
DF1BZ- 3P-2.5DSA
541-2001-0
DF1B- 3P-2.5DSA(01)
541-0226-0 01
3
5.0 10.0
DF1BZ- 4P-2.5DSA
541-2002-3
DF1B- 4P-2.5DSA(01)
541-0227-2 01
4
7.5 12.5
DF1BZ- 5P-2.5DSA
541-2003-6
DF1B- 5P-2.5DSA(01)
541-0228-5 01
5
10.0 15.0
DF1BZ- 6P-2.5DSA
541-2004-9
DF1B- 6P-2.5DSA(01)
541-0229-8 01
6
12.5 17.5
DF1BZ- 7P-2.5DSA
541-2005-1
DF1B- 7P-2.5DSA(01)
541-0230-7 01
7
15.0 20.0
DF1BZ- 8P-2.5DSA
541-2006-4
DF1B- 8P-2.5DSA(01)
541-0231-0 01
8
17.5 22.5
DF1BZ- 9P-2.5DSA
541-2007-7
DF1B- 9P-2.5DSA(01)
541-0232-2 01
9
20.0 25.0
DF1BZ-10P-2.5DSA
541-2008-0
DF1B-10P-2.5DSA(01)
541-0233-5 01
10
22.5 27.5 Yes
DF1BZ-11P-2.5DSA
541-2009-2
_________
_________
_________
DF1BZ-12P-2.5DSA
541-2010-1
DF1B-12P-2.5DSA(01)
541-0235-0 01
12
DF1BZ-13P-2.5DSA
541-2011-4
_________
_________
_________
DF1BZ-14P-2.5DSA
541-2012-7
DF1B-14P-2.5DSA(01)
541-0237-6 01
14
32.5 37.5
DF1BZ-15P-2.5DSA
541-2013-0
DF1B-15P-2.5DSA(01)
541-0238-9 01
15
35.0 40.0
DF1BZ-16P-2.5DSA
541-2014-2
DF1B-16P-2.5DSA(01)
541-0239-1 01
16
37.5 42.5
DF1BZ-18P-2.5DSA
541-2015-5
DF1B-18P-2.5DSA(01)
541-0240-0 01
18
42.5 47.5
___
RoHS
___
27.5 32.5
___
___
20
DF1B-20P-2.5DSA(01)
541-0241-3 01
47.5 52.5
DF1BZ-20P-2.5DSA
541-2016-8
Note 1 : The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.) If needed, please order the product per bag.
Note 2 : The 2 and 3 contact connector contains the concave portion to prevent miss-insertion in the center at one point, which is
different from the above figure.In addition, the 4 to 6 contact connectors have two concave portions at both ends.
DF1B Series●2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
■ Single Row Right Angle Pin Header
+0.1
K Board Through-hole Diameter:Ø1.1+0
Unit : mm
Tin plated
Gold plated
Part No.
HRS No.
Part No.
HRS No.
No. of Contacts
A
B
DF1BZ- 2P-2.5DS
541-2034-0
DF1B- 2P-2.5DS(01)
541-0225-7 01
2
2.5
7.5
DF1BZ- 3P-2.5DS
541-2035-2
DF1B- 3P-2.5DS(01)
541-0226-0 01
3
5.0 10.0
DF1BZ- 4P-2.5DS
541-2036-5
DF1B- 4P-2.5DS(01)
541-0227-2 01
4
7.5 12.5
DF1BZ- 5P-2.5DS
541-2037-8
DF1B- 5P-2.5DS(01)
541-0228-5 01
5
10.0 15.0
DF1BZ- 6P-2.5DS
541-2038-0
DF1B- 6P-2.5DS(01)
541-0229-8 01
6
12.5 17.5
DF1BZ- 7P-2.5DS
541-2039-3
DF1B- 7P-2.5DS(01)
541-0230-7 01
7
15.0 20.0
DF1BZ- 8P-2.5DS
541-2040-2
DF1B- 8P-2.5DS(01)
541-0231-0 01
8
17.5 22.5
DF1BZ- 9P-2.5DS
541-2041-5
_________
_________
_________
DF1BZ-10P-2.5DS
541-2042-8
DF1B-10P-2.5DS(01)
541-0233-5 01
10
DF1BZ-11P-2.5DS
541-2043-0
_________
_________
_________
DF1BZ-12P-2.5DS
541-2044-3
DF1B-12P-2.5DS(01)
541-0235-0 01
12
DF1BZ-13P-2.5DS
541-2045-6
_________
_________
_________
DF1BZ-14P-2.5DS
541-2046-9
DF1B-14P-2.5DS(01)
541-0237-6 01
14
32.5 37.5
DF1BZ-15P-2.5DS
541-2047-1
DF1B-15P-2.5DS(01)
541-0238-9 01
15
35.0 40.0
DF1BZ-16P-2.5DS
541-2048-4
DF1B-16P-2.5DS(01)
541-0239-1 01
16
37.5 42.5
DF1BZ-18P-2.5DS
541-2049-7
DF1B-18P-2.5DS(01)
541-0240-0 01
18
42.5 47.5
___
RoHS
___
22.5 27.5 Yes
___
___
27.5 32.5
___
___
20
47.5 52.5
541-0241-3 01
Note 1 : The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
Note 2 : The 4 and 6 contact connector contains the concave portion to prevent miss-insertion in the center at one point, which is
different from the above figure.
DF1BZ-20P-2.5DS
541-2050-6
DF1B-20P-2.5DS(01)
B189
DF1B Series●2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
■ Single Row Straight Pin Header for Potting
B Tube Size
Unit : mm
Part No.
HRS No.
No. of Contacts
A
B
7.5
Tube Package Quantity RoHS
DF1BD- 2P-2.5DSA(**) 541-0800-3 **
2
2.5
DF1BD- 3P-2.5DSA(**) 541-0801-6 **
3
5
10
48
DF1BD- 4P-2.5DSA(**) 541-0802-9 **
4
7.5
12.5
38
DF1BD- 5P-2.5DSA(**) 541-0803-1 **
5
10
15
32
DF1BD- 6P-2.5DSA(**) 541-0804-4 **
6
12.5
17.5
27
DF1BD- 7P-2.5DSA(**) 541-0805-7 **
7
15
20
24
DF1BD- 8P-2.5DSA(**) 541-0806-0 **
8
17.5
22.5
21
DF1BD- 9P-2.5DSA(**) 541-0807-2 **
9
20
25
19
DF1BD-10P-2.5DSA(**) 541-0808-5 **
10
22.5
27.5
17
Yes
[Specific No.] –* *, (* *)
(05) : Tin plated
(25) : Tin plated, tube packaging
Note 1 : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per pack.
Note 2 : Please order the tube packaging products, multiplying the packaging quantity (pieces).
Note 3 : The 2 and 3 contact connector contains the concave portion to prevent miss-insertion in the center at one point, which is
different from the above figure.In addition, the 4 to 6 contacts connectors have two concave portions at both ends.
BApplicable Potting Thickness : 6mm
Potting status
B190
64pieces
+0.1
K Board Positioning Boss Hole Diameter : Ø1.1+0
+0.1
K Board Through-hole Diameter : Ø1.1+0
DF1B Series●2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
■ Double Row Straight Pin Header
+0.1
●Board Through-hole Diameter : Ø1.1+0
Unit : mm
Tin plated
Gold plated
Part No.
HRS No.
Part No.
HRS No.
No. of Contacts
A
B
DF1BZ- 4DP-2.5DSA
541-2017-0
DF1B- 4DP-2.5DSA(01)
541-0651-5 01
4
7.5
2.5
RoHS
DF1BZ- 6DP-2.5DSA
541-2018-3
DF1B- 6DP-2.5DSA(01)
541-0652-8 01
6
10.0 5.0
DF1BZ- 8DP-2.5DSA
541-2019-6
DF1B- 8DP-2.5DSA(01)
541-0653-0 01
8
12.5 7.5
DF1BZ-10DP-2.5DSA
541-2020-5
DF1B-10DP-2.5DSA(01)
541-0616-4 01
10
15.0 10.0
DF1BZ-12DP-2.5DSA
541-2021-8
DF1B-12DP-2.5DSA(01)
541-0617-7 01
12
17.5 12.5
DF1BZ-14DP-2.5DSA
541-2022-0
DF1B-14DP-2.5DSA(01)
541-0618-0 01
14
20.0 15.0
DF1BZ-16DP-2.5DSA
541-2023-3
DF1B-16DP-2.5DSA(01)
541-0619-2 01
16
22.5 17.5
DF1BZ-18DP-2.5DSA
541-2024-6
DF1B-18DP-2.5DSA(01)
541-0620-1 01
18
25.0 20.0
DF1BZ-20DP-2.5DSA
541-2025-9
DF1B-20DP-2.5DSA(01)
541-0621-4 01
20
27.5 22.5 Yes
DF1BZ-22DP-2.5DSA
541-2026-1
DF1B-22DP-2.5DSA(01)
541-0622-7 01
22
30.0 25.0
DF1BZ-24DP-2.5DSA
541-2027-4
DF1B-24DP-2.5DSA(01)
541-0623-0 01
24
32.5 27.5
DF1BZ-26DP-2.5DSA
541-2028-7
DF1B-26DP-2.5DSA(01)
541-0624-2 01
26
35.0 30.0
DF1BZ-28DP-2.5DSA
541-2029-0
DF1B-28DP-2.5DSA(01)
541-0625-5 01
28
37.5 32.5
DF1BZ-30DP-2.5DSA
541-2030-9
DF1B-30DP-2.5DSA(01)
541-0626-8 01
30
40.0 35.0
DF1BZ-34DP-2.5DSA
541-2031-1
DF1B-34DP-2.5DSA(01)
541-0628-3 01
34
45.0 40.0
DF1BZ-36DP-2.5DSA
541-2032-4
DF1B-36DP-2.5DSA(01)
541-0629-6 01
36
47.5 42.5
DF1BZ-40DP-2.5DSA
DF1B-40DP-2.5DSA(01)
40
541-0631-8 01
541-2033-7
52.5 47.5
Note 1 : The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
Note 2 : The 4 and 6 contact connector contains the concave portion to prevent miss-insertion in the center area at one point, which is
different from the above figure.
B191
DF1B Series●2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
■Double Row Right Angle Pin Header
B192
+0.1
K Board Through-hole Diameter : Ø1.1+0
Unit : mm
Tin plated
Gold plated
Part No.
HRS No.
Part No.
HRS No.
No. of Contacts
A
B
DF1BZ- 4DP-2.5DS
541-2051-9
DF1B- 4DP-2.5DS(01)
541-0654-3 01
4
7.5
2.5
RoHS
DF1BZ- 6DP-2.5DS
541-2052-1
DF1B- 6DP-2.5DS(01)
541-0655-6 01
6
10.0 5.0
DF1BZ- 8DP-2.5DS
541-2053-4
DF1B- 8DP-2.5DS(01)
541-0656-9 01
8
12.5 7.5
DF1BZ-10DP-2.5DS
541-2054-7
DF1B-10DP-2.5DS(01)
541-0632-0 01
10
15.0 10.0
DF1BZ-12DP-2.5DS
541-2055-0
DF1B-12DP-2.5DS(01)
541-0633-3 01
12
17.5 12.5
DF1BZ-14DP-2.5DS
541-2056-2
DF1B-14DP-2.5DS(01)
541-0634-6 01
14
20.0 15.0
DF1BZ-16DP-2.5DS
541-2057-5
DF1B-16DP-2.5DS(01)
541-0635-9 01
16
22.5 17.5
DF1BZ-18DP-2.5DS
541-2058-8
DF1B-18DP-2.5DS(01)
541-0636-1 01
18
25.0 20.0
DF1BZ-20DP-2.5DS
541-2059-0
DF1B-20DP-2.5DS(01)
541-0637-4 01
20
27.5 22.5 Yes
DF1BZ-22DP-2.5DS
541-2060-0
DF1B-22DP-2.5DS(01)
541-0638-7 01
22
30.0 25.0
DF1BZ-24DP-2.5DS
541-2061-2
DF1B-24DP-2.5DS(01)
541-0639-0 01
24
32.5 27.5
DF1BZ-26DP-2.5DS
541-2062-5
DF1B-26DP-2.5DS(01)
541-0640-9 01
26
35.0 30.0
DF1BZ-28DP-2.5DS
541-2063-8
DF1B-28DP-2.5DS(01)
541-0641-1 01
28
37.5 32.5
DF1BZ-30DP-2.5DS
541-2064-0
DF1B-30DP-2.5DS(01)
541-0642-4 01
30
40.0 35.0
DF1BZ-34DP-2.5DS
541-2065-3
DF1B-34DP-2.5DS(01)
541-0644-0 01
34
42.5 37.5
DF1BZ-36DP-2.5DS
541-2066-6
DF1B-36DP-2.5DS(01)
541-0645-2 01
36
47.5 42.5
DF1BZ-40DP-2.5DS
DF1B-40DP-2.5DS(01)
40
541-0647-8 01
541-2067-9
52.5 47.5
Note 1 : The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
Note 2 : The 4 and 6 contact connector contains the concave portion to prevent miss-insertion in the center area at one point, which is
different from the above figure.
DF1B Series●2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
■ Single Row In-line Plug(Simple Lock Type)
Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
KApplicable Socket: DF1B-*S-2.5R
Contact Inserted.
Unit : mm
Part No.
HRS No.
No. of Contacts
A
B
Part No.
HRS No.
No. of Contacts
A
B
DF1BA- 2EP-2.5RC
541-0700-9
2
2.5
7.1
DF1BA- 8EP-2.5RC
541-0706-5
8
17.5
22.1
DF1BA- 3EP-2.5RC
541-0701-1
3
5
9.6
DF1BA- 9EP-2.5RC
541-0707-8
9
20
24.6
DF1BA- 4EP-2.5RC
541-0702-4
4
7.5
12.1
DF1BA-10EP-2.5RC
541-0708-0
10
22.5
27.1
DF1BA- 5EP-2.5RC
541-0703-7
5
10
14.6
DF1BA-12EP-2.5RC
541-0710-2
12
27.5
32.1
DF1BA- 6EP-2.5RC
541-0704-0
6
12.5
17.1
DF1BA- 7EP-2.5RC
541-0705-2
7
15
19.6
RoHS
Yes
RoHS
Yes
Note 1 : The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
Note 2 : The 2 contacts connector contains the concave portion to prevent miss-insertion in the center area at one point, which is
different from the above figure.In addition, the 3 to 6 contact connectors contain the concave portion at both sides.
B Panel Cutouts
Panel
Unit : mm
Note 3
C
Applicable Plug
No. of Contacts
Panel Board Thickness (Note 1)
D
0.5 to 1.2
1.3 to 1.6
1.7 to 2.0
DF1BA- 2EP-2.5RC
2
11.2
11.9
12.6
DF1BA- 3EP-2.5RC
3
13.7
14.4
15.1
9.8
DF1BA- 4EP-2.5RC
4
16.2
16.9
17.6
12.3
DF1BA- 5EP-2.5RC
5
18.7
19.4
20.1
14.8
DF1BA- 6EP-2.5RC
6
21.2
21.9
22.6
17.3
DF1BA- 7EP-2.5RC
7
23.7
24.4
25.1
19.8
DF1BA- 8EP-2.5RC
8
26.2
26.9
27.6
22.3
DF1BA- 9EP-2.5RC
9
28.7
29.4
30.1
24.8
DF1BA-10EP-2.5RC
10
31.2
31.9
32.6
27.3
DF1BA-12EP-2.5RC
12
36.2
36.9
37.6
32.3
7.3
Note 1 : The installation hole size C according to panel board thickness.
Note 2 : Fabricate installation holes so that no burr can occur.
Note 3 : At the panel tab portion, use the surface that will not be rounded.
B193
DF1B Series●2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
■ Double Row In-line Plug (Simple Lock Type)
Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
KApplicable Socket: DF1B-*DS-2.5RC
Contact Inserted.
Unit : mm
Part No.
HRS No.
No. of Contacts
DF1BA- 4DEP-2.5RC
541-0719-7
4
2.5
DF1BA- 6DEP-2.5RC
541-0720-6
6
5
DF1BA- 8DEP-2.5RC
541-0721-9
8
7.5
DF1BA-10DEP-2.5RC
541-0722-1
10
10
DF1BA-12DEP-2.5RC
541-0723-4
12
12.5
18.6
DF1BA-14DEP-2.5RC
541-0724-7
14
15
21.1
DF1BA-16DEP-2.5RC
541-0725-0
16
17.5
23.6
DF1BA-18DEP-2.5RC
541-0726-2
18
20
26.1
A
Part No.
HRS No.
No. of Contacts
A
B
8.6
DF1BA-20DEP-2.5RC
541-0727-5
20
22.5
28.6
11.1
DF1BA-22DEP-2.5RC
541-0728-8
22
25
31.1
13.6
DF1BA-24DEP-2.5RC
541-0729-0
24
27.5
33.6
16.1
DF1BA-26DEP-2.5RC
541-0730-0
26
30
36.1
DF1BA-28DEP-2.5RC
541-0731-2
28
32.5
38.6
DF1BA-30DEP-2.5RC
541-0732-5
30
35
41.1
DF1BA-34DEP-2.5RC
541-0734-0
34
40
46.1
B
RoHS
Yes
Yes
Note 1 : The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
Note 2 : The 4 contacts connector contains the concave portion to prevent miss-insertion in the center at one point, which is different
from the above figure.
B Panel Cutouts
Unit : mm
C
Applicable Plug
No. of Contacts Panel Board Thickness (Note 1)
D
0.5 to 1.2 1.3 to 1.6 1.7 to 2.0
Note 3
Panel
DF1BA- 4DEP-2.5RC
4
12.7
13.4
14.1
8.8
DF1BA- 6DEP-2.5RC
6
15.2
15.9
16.6
11.3
DF1BA- 8DEP-2.5RC
8
17.7
18.4
19.1
13.8
DF1BA-10DEP-2.5RC
10
20.2
20.9
21.6
16.3
DF1BA-12DEP-2.5RC
12
22.7
23.4
24.1
18.8
DF1BA-14DEP-2.5RC
14
25.2
25.9
26.6
21.3
DF1BA-16DEP-2.5RC
16
27.7
28.4
29.1
23.8
DF1BA-18DEP-2.5RC
18
30.2
30.9
31.6
26.3
DF1BA-20DEP-2.5RC
20
32.7
33.4
34.1
28.8
DF1BA-22DEP-2.5RC
22
35.2
35.9
36.6
31.3
DF1BA-24DEP-2.5RC
24
37.7
38.4
39.1
33.8
DF1BA-26DEP-2.5RC
26
40.2
40.9
41.6
36.3
DF1BA-28DEP-2.5RC
28
42.7
43.4
44.1
38.8
DF1BA-30DEP-2.5RC
30
45.2
45.9
46.6
41.3
DF1BA-34DEP-2.5RC
34
50.2
50.9
51.6
46.3
Note 1 : The installation hole size C according to panel board thickness.
Note 2 : Fabricate installation holes so that no burr can occur.
Note 3 : At the panel tab portion, use the surface that will not be rounded.
B194
RoHS
DF1B Series●2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
■ Single Row In-line Socket (Full Lock Type)
Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
KApplicable Socket: DF1B-*EP-2.5RC
Contact Inserted.
Unit : mm
Part No.
HRS No.
No. of Contacts
A
B
Part No.
HRS No.
No. of Contacts
A
B
DF1B- 2ES-2.5RC
541-0320-8
2
2.5
6.5
DF1B- 8ES-2.5RC
541-0326-4
8
17.5
21.5
DF1B- 3ES-2.5RC
541-0321-0
3
5
9
DF1B- 9ES-2.5RC
541-0327-7
9
20
24
DF1B- 4ES-2.5RC
541-0322-3
4
7.5
11.5
DF1B-10ES-2.5RC
541-0328-0
10
22.5
26.5
DF1B- 5ES-2.5RC
541-0323-6
5
10
14
DF1B-11ES-2.5RC
541-0329-2
11
25
29
DF1B- 6ES-2.5RC
541-0324-9
6
12.5
16.5
DF1B-12ES-2.5RC
541-0330-1
12
27.5
31.5
DF1B- 7ES-2.5RC
541-0325-1
7
15
19
DF1B-13ES-2.5RC
541-0331-4
13
30
34
RoHS
Yes
RoHS
Yes
Note 1 : The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
B Panel Cutouts
Note 3
Panel
Unit : mm
E
Applicable Plug
No. of Contacts
C
D
Panel Board Thickness (Note 1)
0.5 to 1.2
1.3 to 1.6
1.7 to 2.0
DF1B- 2ES-2.5RC
2
4.7
6.7
10.8
11.3
12
DF1B- 3ES-2.5RC
3
7.2
9.2
13.3
13.8
14.5
DF1B- 4ES-2.5RC
4
9.7
11.7
15.8
16.3
17
DF1B- 5ES-2.5RC
5
12.2
14.2
18.3
18.8
19.5
DF1B- 6ES-2.5RC
6
14.7
16.7
20.8
21.3
22
DF1B- 7ES-2.5RC
7
17.2
19.2
23.3
23.8
24.5
DF1B- 8ES-2.5RC
8
19.7
21.7
25.8
26.3
27
DF1B- 9ES-2.5RC
9
22.2
24.2
28.3
28.8
29.5
DF1B-10ES-2.5RC
10
24.7
26.7
30.8
31.3
32
DF1B-11ES-2.5RC
11
27.2
29.2
33.3
33.8
34.5
DF1B-12ES-2.5RC
12
29.7
31.7
35.8
36.3
37
DF1B-13ES-2.5RC
13
32.2
34.2
38.3
38.8
39.5
Note 1 : The installation hole size C will be changed according to panel board thickness.
Note 2 : Fabricate installation holes so that no burr can occur.
Note 3 : At the panel tab portion, use the surface that will not be rounded.
B195
DF1B Series●2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
■ Double Row In-line Socket (Full Lock Type)
Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
KApplicable Socket: DF1B-*DEP-2.5RC
Contact Inserted.
Unit : mm
Part No.
HRS No.
No. of Contacts
Part No.
HRS No.
No. of Contacts
A
B
DF1B-10DES-2.5RC
541-0351-1
15
DF1B-24DES-2.5RC
541-0357-8
24
27.5
32.5
DF1B-12DES-2.5RC
DF1B-14DES-2.5RC
12.5
17.5
DF1B-26DES-2.5RC
541-0358-0
26
30
35
15
20
DF1B-28DES-2.5RC
541-0359-3
28
32.5
37.5
16
17.5
22.5
DF1B-30DES-2.5RC
541-0360-2
30
35
40
541-0346-1
18
20
25
DF1B-32DES-2.5RC
541-0361-5
32
37.5
42.5
DF1B-20DES-2.5RC
541-0355-2
20
22.5
27.5
DF1B-34DES-2.5RC
541-0362-8
34
40
45
DF1B-22DES-2.5RC
541-0356-5
22
25
30
A
B
10
10
541-0352-4
12
541-0353-7
14
DF1B-16DES-2.5RC
541-0354-0
DF1B-18DES-2.5RC
RoHS
Yes
Yes
Note 1 : The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
B Panel Cutouts
Note 3
Panel
Unit : mm
C
Applicable Plug
No. of Contacts
Panel Board Thickness (Note 1)
0.5 to 1.2
1.3 to 1.6
1.7 to 2.0
D
E
DF1B-10DES-2.5RC
10
19.1
19.8
20.5
15.2
3.7
DF1B-12DES-2.5RC
12
21.6
22.3
23
17.7
3.7
DF1B-14DES-2.5RC
14
24.1
24.8
25.5
20.2
3.7
DF1B-16DES-2.5RC
16
26.6
27.3
28
22.7
3.7
DF1B-18DES-2.5RC
18
29.1
29.8
30.5
25.2
3.7
DF1B-20DES-2.5RC
20
31.6
32.3
33
27.7
5.2
DF1B-22DES-2.5RC
22
34.1
34.8
35.5
30.2
5.2
DF1B-24DES-2.5RC
24
36.6
37.3
38
32.7
5.2
DF1B-26DES-2.5RC
26
39.1
39.8
40.5
35.2
5.2
DF1B-28DES-2.5RC
28
41.6
42.3
43
37.7
5.2
DF1B-30DES-2.5RC
30
44.1
44.8
45.5
40.2
5.2
DF1B-32DES-2.5RC
32
46.6
47.3
48
42.7
5.2
DF1B-34DES-2.5RC
34
49.1
49.8
50.5
45.2
5.2
Note 1 : The installation hole size C according to panel board thickness.
Note 2 : Fabricate installation holes so that no burr can occur.
Note 3 : At the panel tab portion, use the surface that will not be rounded.
B196
RoHS
DF1B Series●2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
■ Single Row In-line Plug (Full Lock Type)
Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
KApplicable Socket: DF1B-*ES-2.5RC
Contact Inserted.
Unit : mm
Part No.
HRS No.
No. of Contacts
A
B
Part No.
HRS No.
No. of Contacts
A
B
DF1B- 2EP-2.5RC
541-0332-7
2
8.9
2.5
DF1B- 8EP-2.5RC
541-0338-3
8
23.9
17.5
DF1B- 3EP-2.5RC
541-0333-0
3
11.4
5
DF1B- 9EP-2.5RC
541-0339-6
9
26.4
20
DF1B- 4EP-2.5RC
541-0334-2
4
13.9
DF1B-10EP-2.5RC
541-0340-5
10
28.9
22.5
DF1B- 5EP-2.5RC
541-0335-5
5
16.4
10
DF1B-11EP-2.5RC
541-0341-8
11
31.4
25
DF1B- 6EP-2.5RC
541-0336-8
6
18.9
12.5
DF1B-12EP-2.5RC
541-0342-0
12
33.9
27.5
DF1B- 7EP-2.5RC
541-0337-0
7
21.4
15
DF1B-13EP-2.5RC
541-0343-3
13
36.4
30
7.5
RoHS
Yes
RoHS
Yes
Note 1 : The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
■ Double Row In-line Plug (Full Lock Type)
KApplicable Socket: DF1B-*DES-2.5RC
Contact Inserted.
Unit : mm
Part No.
HRS No.
No. of Contacts
A
Part No.
HRS No.
No. of Contacts
A
B
DF1B-10DEP-2.5RC
541-0366-9
10
17.2
DF1B-12DEP-2.5RC
541-0367-1
12
19.7
10
DF1B-24DEP-2.5RC
541-0372-1
24
34.7
27.5
12.5
DF1B-26DEP-2.5RC
541-0373-4
26
37.2
30
DF1B-14DEP-2.5RC
541-0368-4
14
22.2
15
DF1B-28DEP-2.5RC
541-0374-7
28
39.7
32.5
DF1B-16DEP-2.5RC
541-0369-7
16
24.7
17.5
DF1B-30DEP-2.5RC
541-0375-0
30
42.2
35
DF1B-18DEP-2.5RC
541-0350-9
18
27.2
20
DF1B-32DEP-2.5RC
541-0376-2
32
44.7
37.5
DF1B-20DEP-2.5RC
541-0370-6
20
29.7
22.5
DF1B-34DEP-2.5RC
541-0377-5
34
47.2
40
DF1B-22DEP-2.5RC
541-0371-9
22
32.2
25
B
RoHS
Yes
RoHS
Yes
Note 1 : The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
B197
DF1B Series●2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
■ ID Contact for Socket
Part No.
HRS No.
DF1B-R24F
541-0217-9
DF1B-R24
541-0220-3
DF1B-R26F
541-0218-1
DF1B-R26
541-0221-6
DF1B-R28F
541-0219-4
DF1B-R28
541-0222-9
DF1B-R24FA(06) 541-0261-0 06
DF1B-R24A(06) 541-0264-9 06
DF1B-R26FA(06) 541-0262-3 06
DF1B-R26A(06) 541-0265-1 06
DF1B-R28FA(06) 541-0263-6 06
DF1B-R28A(06) 541-0266-4 06
Applicable Cable
Applicable
Cable Indication
AWG
UL Style
Wire Construction Jacket Diameter
24
24AWG
1061
11 cores./0.16mm 0.9 to 1.39mm
26
26AWG
28
28AWG
24
24AWG
26
26AWG
28
28AWG
1007
1061
1007
1061
1061
1007
1061
1007
7 cores./0.16mm
0.9 to 1.39mm
7 cores./0.127mm 0.9 to 1.39mm
11 cores./0.16mm 0.9 to 1.39mm
7 cores./0.16mm
0.9 to 1.39mm
7 cores./0.127mm 0.9 to 1.39mm
Finish
RoHS
10,000/reel
100/pack
10,000/reel
Tin plated
100/pack
10,000/reel
100/pack
Yes
10,000/reel
100/pack
10,000/reel
Gold plated
100/pack
10,000/reel
100/pack
K ID Contact Extraction Tool DF-C-PO (A)
Note 1 : The applicable cable conductor is the tin plated annealing copper wire.
Note 2 : If other cables are used instead of the applicable cable, cotact Hirose sales department.
■ Crimping Contact for Socket
K Applicable Cable (Tin Plated Annealing Copper Wire) K Recommended Cable
UL1061, UL1007
Conductor Size (Wire construction)
K Strip Length
20AWG (21cores/0.18mm)
2.0 to 2.5mm
22AWG (17cores/0.16mm)
Note : If other cables are used instead
24AWG (11cores/0.16mm)
of the applicable cable, consult
26AWG (7cores/0.16mm)
Hirose sales department.
28AWG (7cores0.127mm)
30AWG (7cores/0.1mm)
Applicable
Part No.
HRS No.
DF1B-2022SCF
541-0223-1
20
DF1B-2022SC
541-0224-4
22
DF1B-2428SCF
541-0678-1
24
DF1B-2428SC
541-0679-4
28
DF1B-30SCF
541-0682-9
DF1B-30SC
541-0683-1
Cable Indication
30
DF1B-2022SCFA 541-0662-1
20
DF1B-2022SCA
541-0663-4
22
DF1B-2428SCFA 541-0680-3
24
DF1B-2428SCA
541-0681-6
28
DF1B-30SCFA
541-0684-4
DF1B-30SCA
541-0685-7
30
Applicable Cable
AWG
Jacket Diameter
20 to 22AWG 1.2 to 1.9mm
24 to 28AWG 0.9 to 1.5mm
30AWG
0.6 to 1.2mm
20 to 22AWG 1.2 to 1.9mm
24 to 28AWG 0.9 to 1.5mm
30AWG
K Crimping Contact Extraction Tool DF-C-PO (B)
B198
1061
Packaging
0.6 to 1.2mm
Packaging
Finish
RoHS
10,000/reel
100/pack
10,000/reel
100/pack
Tin plated
10,000/reel
100/pack
Yes
10,000/reel
100/pack
10,000/reel
100/pack
10,000/reel
100/pack
Gold plated
DF1B Series●2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
■ ID Contact for Plug
Part No.
HRS No.
DF1B-24PRF 541-0666-2
DF1B-24PR
541-0667-5
DF1B-26PRF 541-0668-8
DF1B-26PR
541-0669-0
DF1B-28PRF 541-0670-0
DF1B-28PR
541-0671-2
Applicable Cable
Applicable
Cable Indication
AWG
UL Style
Wire structure Jacket Diameter
24
24AWG
1061
11 pcs./0.16mm 0.9 to 1.39mm
26
26AWG
28
28AWG
1061
1007
1061
1007
Packaging
Finish
RoHS
Tin plated
Yes
10,000/reel
100/pack
10,000/reel
7 pcs./0.16mm 0.9 to 1.39mm
100/pack
10,000/reel
7 pcs./0.127mm 0.9 to 1.39mm
100/pack
K ID Contact Extraction Tool DF-C-PO (C)
Note 1 : The applicable cable conductor is the tin plated annealing copper wire.
Note 2 : If other cables are used instead of the applicable cable, contact Hirose sales department.
■ Crimping Contact for Plug
K Applicable Cable (Tin Plated Annealing Copper Wire) K Recommended Cable
UL1061, UL1007
Conductor Size (Contact wire construction)
K Strip Length
20AWG (21 pieces/0.18mm)
3.0 to 3.7mm
22AWG (17 pieces/0.16mm)
Note : If other cables are used instead
24AWG (11 pieces/0.16mm)
of the applicable cable, consult
26AWG (7 pieces/0.16mm)
Hirose sales department.
28AWG (7 pieces/0.127mm)
30AWG (7 pieces/0.1mm)
Part No.
HRS No.
Applicable
cable indicator
DF1B-2022PCF 541-0259-9
20
541-0260-8
22
DF1B-2428PCF 541-0664-7
24
DF1B-2428PC
541-0665-0
28
DF1B-30PCF
541-0686-0
DF1B-30PC
541-0687-2
DF1B-2022PC
30
DF1B-2022PCFB 541-0690-7
20
DF1B-2022PCB 541-0691-0
22
DF1-PD2428SCFB 541-0660-6
24
DF1-PD2428SCB 541-0661-9
28
DF1B-30PCFB
541-0688-5
DF1B-30PCB
541-0689-8
30
Applicable Cable
AWG
Jacket Diameter
20 to 22AWG
1.2 to 1.9mm
24 to 28AWG
0.9 to 1.5mm
30AWG
0.6 to 1.2mm
20 to 22AWG
1.2 to 1.9mm
24 to 28AWG
0.9 to 1.5mm
30AWG
0.6 to 1.2mm
Packaging
Treatment
RoHS
10,000/reel
100/pack
10,000/reel
100/pack
Tin plated
10,000/reel
100/pack
Yes
10,000/reel
100/pack
10,000/reel
100/pack
Gold plated
10,000/reel
100/pack
K Crimping Contact Extraction Tool DF-C-PO (C)
B199
DF1B Series●2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
B Applicable Tool
Connection Type
Type
Applicator
ID
Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
Manual ID tool
B200
Applicator
Part No.
HRS No.
AP105-DF1B-R
901-4507-4
DF1B-R**F/FA06 **=24,26,28
Applicable Contacts
AP105-DF1B-PR
901-4536-2
DF1B-**PRF**=24,26,28
DF1B-T2428HR
550-0171-0
DF1B-R**/A06**=24,26,28
DF1B-T2428PHR
550-0221-7
DF1B-**PR/PRB **=24,26,28
AP105-DF1B-2022S
901-4510-9
DF1B-2022SCF/SCFA
AP105-DF1B-2428S
901-4518-0
DF1B-2428SCF/SCFA
AP105-DF1B-30S
901-4517-8
DF1B-30SCF/SCFA
AP105-DF1B-2022P
901-4509-0
DF1B-2022PCF/PCFB
AP105-DF1B-2428P
901-4521-5
DF1B-2428PCF,DF1-PD2428SCF/SCFB
AP105-DF1B-30P
901-4519-3
DF1B-30PCF/PCFB
DF1B-TA2022SHC
550-0182-7
DF1B-2022SC/SCA
DF1B-TA2428SHC
550-0209-1
DF1B-2428SC/SCA
Manual
DF1B-TA30SHC
550-0211-3
DF1B-30SC/SCA
crimping tool
DF1B-TA2022PHC
550-0183-0
DF1B-2022PC/PCB
DF1B-TA2428PHC
550-0224-5
DF1B-2428PC,DF1-PD2428SCB
DF1B-TA30PHC
550-0210-0
DF1B-30PC/PCB
Crimping
Press Main Unit
Extraction Tool
CM-105C
901-0001-0
__________________________________
DF-C-PO(A)
550-0170-8
DF1B-R**F
DF-C-PO(B)
550-0179-2
DF1B-****SCF
DF-C-PO(C)
550-0198-7
DF1B-****PC,DF1B-**PRF
Note 1 : Please conduct crimping work according to the "Crimping quality standards" and "Crimping condition table".
Note 2 : If a trouble has occurred due to tools which are not designated by Hirose, Hirose won't guarantee any product.
DF1B Series●2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
B Applicable Tool
Powered by TCPDF (www.tcpdf.org)
BPrecautions
1. Recommended Soldering Condition
Flow : 250ç for 10 seconds
Manual soldering : 300ç for 3 seconds
2. Cleaning Condition
Refer to Wire to Board Connector Use Hand book.
3. Connection Condition
Refer to Wire to Board Connector Use Hand book.
4. Cautions
■The color phase of this product is slightly different from that of the formed product according to
the manufacturing lot and future storage conditions, but the difference doesn't affect the
performance.
5. Precation
Refer to Wire to Board Connector Use Hand book.
B201