UNISONIC TECHNOLOGIES CO., LTD MBR30150C DIODE SCHOTTKY BARRIER RECTIFIER FEATURES * 30 amps total (15 amps per diode leg) * Guard ring for transient protection * Low forward voltage drop * High surge capability * Low power loss/High efficiency SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free MBR30150CL-TA3-T MBR30150CG-TA3-T MBR30150CL-TF1-T MBR30150CG-TF1-T MBR30150CL-T3P-T MBR30150CG-T3P-T Note: Pin Assignment: A: Anode K: Cathode Package TO-220 TO-220F1 TO-3P Pin Assignment 1 2 3 A K A A K A A K A Packing Tube Tube Tube MBR30150CL-TA3-T (1)Packing Type (1) T: Tube (2)Package Type (2) TA3: TO-220, TF1: TO-220F1, T3P: TO-3P (3)Green Package (3) L: Lead Free, G: Halogen Free and Lead Free MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 3 QW-R601-184.C MBR30150C DIODE ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Maximum Repetitive Peak Reverse Voltage VRRM 150 V Maximum non-repetitive Peak Reverse Voltage VRM 150 V Maximum DC Blocking Voltage VR 150 V Per Leg 15 A Average Forward Rectified Output Current IO Total 30 A Non-Repetitive Peak Forward Surge Current IFSM 200 A 8.3ms Single Half-Sine-Wave Junction Capacitance (Note 4) CJ 300 pF Operating Temperature TJ -65 ~ +150 °C Storage Temperature TSTG -65 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL RESISTANCES CHARACTERISTICS PARAMETER TO-220/TO-220F1 Junction to Ambient TO-3P TO-220 TO-220F1 Junction to Case TO-3P SYMBOL θJA θJC RATINGS 60 29 2 3.3 1.5 UNIT °С/W °С/W ELECTRICAL CHARACTERISTICS (Note 2) PARAMETER SYMBOL Instantaneous Forward Voltage Drop VF Instantaneous Reverse Current IR TEST CONDITIONS IF=15A, TC=25°C IF=15A, TC=125°C IF=30A, TC=25°C IF=30A, TC=125°C Rated DC Voltage, TC=25°C Rated DC Voltage, TC=125°C MIN TYP MAX UNIT 0.90 V 0.85 V 1 V 0.95 V 500 μA 20 mA Notes: 1. 2.0μs Pulse Width, f = 1.0 KHz 2. Pulse Test: Pulse Width = 300μs, Duty Cycle ≤ 2.0% 3. Applied VR = 4.0V and f = 1.0 MHz UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 3 QW-R601-184.C MBR30150C ■ DIODE TYPICAL CHARACTERICS UTC assum es no responsibility for equipm ent failures that result from using products at v alues that exceed, ev en m om entarily, rated v alues (such as m axim um ratings, operating condition ranges, or other param eters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or system s where m alfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The inform ation presented in this docum ent does not form part of any quotation or contract, is believ ed to be accurate and reliable and m ay be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-184.C