Part Number: www.SunLED.com DUG76C 76.2mm (3.0") SINGLE DIGIT DISPLAY Features ● 3.0 INCH DIGIT HEIGHT. ●LOW CURRENT OPERATION. ●EXCELLENT CHARACTER APPEARANCE. ●EASY MOUNTING ON P.C. BOARDS OR SOCKETS. ●I.C. COMPATIBLE. ●CATEGORIZED FOR LUMINOUS INTENSITY. ●MECHANICALLY RUGGED. ●STANDARD : GRAY FACE, WHITE SEGMENT. ●RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. Operating Characteristics (TA=25°C) 3.Specifications are subject to change without notice. Absolute maximum ratings (TA=25°C) Reverse Voltage Per Segment or (Dp and Comma) VR Forward Current Per Segment or (Dp and Comma) IF Forward Current (Peak) Per Segment or (Dp and Comma) 1/10 Duty Cycle 0.1ms Pulse Width iFS UG (GaP) Unit 30 (10) V 25 (25) mA 140 (140) Power Dissipation Per Segment or (Dp and Comma) PT 375 (125) Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Lead Solder Temperature [2mm Below Package Base] Part Number DUG76C Emitting Color Green Published Date : MAR 18,2008 mA mW °C 260°C For 3~5 Seconds Emitting Material GaP UG (GaP) Unit Forward Voltage (Typ.) Per Segment or (Dp and Comma) (IF=10mA) VF 12.0 (4.0) V Forward Voltage (Max.) Per Segment or (Dp and Comma) (IF=10mA) VF 15.0 (5.0) V Reverse Current Per Segment or (Dp and Comma) (VR=30(10)V) IR 10 (10) uA Wavelength Of Peak Emission (Typ.) (IF=10mA) λP 565 nm Wavelength Of Dominant Emission (Typ.) (IF=10mA) λD 568 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Δλ 30 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 15 pF Luminous Intensity (IF=10mA) ucd min. typ. 4700 18615 Drawing No :SDSA2184 Wavelength nm λP Description 565 Common Cathode, Rt. Hand Decimal V3 Checked : Shin Chi P.1/5 Part Number: www.SunLED.com DUG76C 76.2mm (3.0") SINGLE DIGIT DISPLAY UG Published Date : MAR 18,2008 Drawing No :SDSA2184 V3 Checked : Shin Chi P.2/5 Part Number: www.SunLED.com Published Date : MAR 18,2008 DUG76C 76.2mm (3.0") SINGLE DIGIT DISPLAY Drawing No :SDSA2184 V3 Checked : Shin Chi P.3/5 Part Number: www.SunLED.com DUG76C 76.2mm (3.0") SINGLE DIGIT DISPLAY Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 18,2008 Drawing No :SDSA2184 V3 Checked : Shin Chi P.4/5 Part Number: www.SunLED.com 76.2mm (3.0") SINGLE DIGIT DISPLAY PACKING & LABEL SPECIFICATIONS Published Date : MAR 18,2008 DUG76C Drawing No :SDSA2184 DUG76C V3 Checked : Shin Chi P.5/5