MACOM MASW-007221 Gaas spdt switch dc - 3.0 ghz Datasheet

RoHS
Compliant
GaAs SPDT Switch
DC - 3.0 GHz
MASW-007221
V1
Features
•
•
•
•
•
•
•
•
Functional Schematic: Positive Control Voltage
Low Insertion Loss: < 0.3 dB @ 900 MHz
Low Power Consumption: < 15 µA @ -2.3 Volts
Positive or Negative 2.3 to 8 Volt Control
Lead-Free SC-70 (SOT-363) Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant version of SW-456
PIN 1
VCTL1
RF1
1000 pF
RFC
GND
1000 pF
RF2
Description
1000 pF
M/A-COM’s MASW-007221 is a GaAs monolithic
switch in a lead-free SC-70 (SOT-363) surface
mount plastic package. The MASW-007221 is
ideally suited for applications where very low power
consumption, low insertion loss, very small size, and
low cost are required. Typical applications are in
dual band systems where switching between small
signal components is required, i.e. filter banks,
single-band LNA’s, converters, etc.
Functional Schematic: Negative Control Voltage
PIN 1
The MASW-007221 is fabricated using a mature 0.5
micron PHEMT process. The process features full
passivation for performance and reliability.
Package
MASW-007221-000000
Bulk Packaging
MASW-007221-TR3000
3000 piece reel
RFC
GND
VCTL2
RF2
Pin Configuration
PIN
Ordering Information 1
Part Number
VCTL1
RF1
The MASW-007221 can be used in applications up
to 0.25 watts in systems such as cellular, PCS,
DCS1800, GSM, CDMA, W-CDMA and other
analog / digital wireless communication systems.
Function
Description
1
RF1
RF In/Out
2
GND
RF Ground
3
RF2
RF In/Out
4
VCTL2
Voltage Control 2
5
RFC
RF Common
6
VCTL1
Voltage Control 1
Absolute Maximum Ratings 2,3
1. Reference Application Note M513 for reel size information.
2.
3.
1
VCTL2
Parameter
Absolute Maximum
Input Power (0.5 - 3.0 GHz)
3 V Control
5 V Control
+30 dBm
+33 dBm
Operating Voltage
+8.5 volts
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
Exceeding any one or combination of these limits may cause
permanent damage to this device.
M/A-COM does not recommend sustained operation near
these survivability limits.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
GaAs SPDT Switch
DC - 3.0 GHz
MASW-007221
V1
Electrical Specifications: TA = 25°C, VCTL = 0, -2.3 volts (unless otherwise specified) , Z0 = 50 Ω 4
4.
5.
Parameter
Test Conditions
Units
Min.
Typ.
Max.
Insertion Loss 5
DC - 1 GHz
1 - 2 GHz
2 - 3 GHz
dB
dB
dB
—
—
—
0.35
0.45
0.56
0.5
0.6
0.8
Isolation
DC - 1 GHz
1 - 2 GHz
2 - 3 GHz
dB
dB
dB
20
15
10
22
17
12
—
—
—
VSWR
DC - 3 GHz
Ratio
—
1.2:1
1.4:1
P1dB (2.3V supply)
500 MHz - 3 GHz
dBm
—
21
—
P1dB (3V supply)
500 MHz - 3 GHz
dBm
—
27
—
Input IP2
2-Tone 900 MHz, 5 MHz spacing (3.0 V)
dBm
—
81
—
Input IP3
2-Tone 900 MHz, 5 MHz spacing (3.0 V)
dBm
—
52
—
Trise, Tfall
10% to 90% RF, 90% to 10% RF
ns
—
25
—
Ton, Toff
50% Control to 90% RF, Control to 10% RF
ns
—
25
—
Transients
In-Band
mV
—
25
—
Control Current
VCTL = -2.3 V
µA
—
4
15
External DC blocking capacitors are required on all RF ports when using positive voltage control.
Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 1 GHz, 39 pF for 0.5 GHz - 3 GHz.
Lead-Free SC-70 (SOT-363) †
Truth Table
Mode
(Control)
V1
V2
RFC RF1
RFC RF2
Positive 6
0 ± 0.2 V
+2.3 to +8 V
Off
On
+2.3 to +8 V
0 ± 0.2 V
On
Off
0 ± 0.2 V
-2.3 V to -8 V
On
Off
-2.3 V to -8 V
0 ± 0.2 V
Off
On
Negative
6.
7.
7
External DC blocking capacitors are required on all RF
ports. 1000 pF capacitors used for positive control voltage.
For higher frequency operation, smaller value DC blocking
capacitors can be substituted.
If negative control is used, DC blocking capacitors are not
required on RF ports.
Qualification
Qualified to M/A-COM
Process Flow –2.
specification
REL-201,
Handling Procedures
†
Reference Application Note M538 for lead-free solder reflow
recommendations.
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive to
electrostatic discharge (ESD) and can be damaged
by static electricity. Proper ESD control techniques
should be used when handling these devices.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
GaAs SPDT Switch
DC - 3.0 GHz
MASW-007221
V1
Typical Performance Curves
VSWR Over Temperature
Insertion Loss vs. Frequency Over Temperature
0.0
2.0
-0.1
1.9
-0.2
1.8
+85°C
-0.3
1.7
-0.4
1.6
1.5
-0.5
1.4
+25°C
-0.6
-40°C
-0.7
1.3
1.2
-0.8
+85°C
1.1
-0.9
-1.0
0.0
0.5
1.0
1.5
2.0
2.5
0.0
3.0
+25°C
-40°C
1.0
0.5
1.0
1.5
2.0
2.5
3.0
FREQUENCY (GHz)
FREQUENCY (GHz)
Insertion Loss vs. Frequency
(+2.3 V Control, 1000 pF Capacitor on RF Ports)
Isolation vs. Frequency Over Temperature
-10.0
0.0
-0.1
-15.0
-0.2
-0.3
-20.0
-0.4
-0.5
-25.0
0
-0.6
-0.7
-30.0
-0.8
-35.0
-0.9
-1.0
-40.0
0.0
0.0
0.5
1.0
1.5
2.0
2.5
0.5
3.0
1.5
2.0
2.5
3.0
FREQUENCY (GHz)
FREQUENCY (GHz)
Isolation vs. Frequency
(+2.3 V Control, 1000 pF Capacitor on RF Ports)
1.0
VSWR vs. Frequency
(+2.3 V Control, 1000 pF Capacitor on RF Ports)
-10.0
2.0
-15.0
1.9
1.8
-20.0
1.7
-25.0
1.6
-30.0
1.5
-35.0
1.4
1.3
-40.0
1.2
-45.0
1.1
1.0
-50.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
FREQUENCY (GHz)
3
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
FREQUENCY (GHz)
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Similar pages