Panasonic AQY221N3VW Super miniature ssop lower output capacitance and on resistance (cã r5) load voltage 25v Datasheet

PhotoMOS.book Page 159 Thursday, March 26, 2009 2:21 PM
RF SSOP 1 Form A C×R5 (AQY221N3V)
Super miniature SSOP
Lower output capacitance
and on resistance (C×R5)
Load voltage 25V
4.45
.175
1.80
.071
2.65
.104
mm inch
1
4
2
3
RF SSOP 1 Form A C×R5
(AQY221N3V)
FEATURES
TYPICAL APPLICATIONS
1. Reduced package size
Lower surface has been reduced 60%
and mounting space 40% compared to
conventional SOP4-pin type.
2. Lower output capacitance and onresistance
Output capacitance (Cout): 1.0pF (typ.)
ON resistance (Ron): 5.5Ω (typ.)
3. Mounting space has been reduced
and output signals have been
improved by using new flat lead
terminals.
1. Measuring and testing equipment
IC tester, Liquid crystal driver tester,
Semiconductor performance tester,
Board tester, etc.
2. Medical equipment
Ultrasonic wave diagnostic machine
3. Multi-point recorder
Warping, Thermo couple, etc.
4. Telecommunication and
broadcasting equipment
Conventional
SOP
SSOP
Compliance with RoHS Directive
Flat lead
4. High speed switching
Turn on time: 0.02ms (typ.)
Turn off time: 0.02ms (typ.)
TYPES
AC/DC dual use
Output rating*1
Load voltage
Load current
25 V
150 mA
Package
SSOP
Tape and reel packing style
Picked from the 1/4-pin side
AQY221N3VY
Picked from the 2/3-pin side
AQY221N3VW
Packing quantity
in tape and reel*2
3,500 pcs.
Notes: *1 Indicate the peak AC and DC values.
*2 Tape and reel is the standard packing style for SSOP.
For space reasons, only “N3V” is marked on the product as the part number. The three initial letters of the part number “AQY”, and the package (SSOP) indicator
“V” and the packing style indicator “Y” or “W” are not marked on the relay.
RATING
1. Absolute maximum ratings (Ambient temperature: 25°C 77°F)
Item
LED forward current
LED reverse voltage
Input
Peak forward current
Power dissipation
Load voltage (peak AC)
Continuous load current
Output
Peak load current
Power dissipation
Total power dissipation
I/O isolation voltage
Temperature
limits
Operating
Storage
Symbol
IF
VR
IFP
Pin
VL
IL
Ipeak
Pout
PT
Viso
Topr
Tstg
AQY221N3V
50mA
5V
1A
75mW
25V
0.15A
0.4A
250mW
300mW
1,500V AC
–40°C to +85°C –40°F to +185°F
–40°C to +100°C –40°F to +212°F
Remarks
f=100 Hz, Duty factor=0.1%
Peak AC, DC
100 ms (1 shot), VL= DC
Non-condensing at low temperatures
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
PhotoMOS.book Page 160 Thursday, March 26, 2009 2:21 PM
RF SSOP 1 Form A C×R5 (AQY221N3V)
2. Electrical characteristics (Ambient temperature: 25°C 77°F)
Item
Symbol
Typical
Maximum
Minimum
Typical
Typical
Maximum
Typical
LED operate current
Input
LED turn off current
LED dropout voltage
On resistance
Output
Off state leakage current
IFoff
VF
Ron
Turn off time*
I/O capacitance
Initial I/O isolation resistance
Condition
IL = 80 mA
IL = 80 mA
IF = 50 mA
IF = 5 mA, IL = 80 mA
Within 1 s on time
7.5Ω
1.0 pF
Cout
IF = 0 mA, VB = 0 V
f = 1 MHz
1.5 pF
0.01 nA
ILeak
Typical
Maximum
Typical
Maximum
Typical
Maximum
Minimum
Turn on time*
Transfer
characteristics
IFon
Maximum
Typical
Maximum
Typical
Maximum
Output capacitance
AQY221N3V
1.0 mA
3.0 mA
0.2 mA
0.9 mA
1.35 V (1.14 V at IF = 5 mA)
1.5 V
5.5Ω
IF = 0 mA
VL = Max.
10 nA
0.02 ms
Ton
IF = 5 mA, VL = 10 V
RL = 125Ω
0.2 ms
0.02 ms
Toff
IF = 5 mA, VL = 10 V
RL = 125Ω
0.2 ms
0.8 pF
Ciso
f = 1 MHz
VB = 0 V
1.5 pF
1,000MΩ
Riso
500V DC
Note: Variation possible through combinations of output capacitance and on resistance. For more information, please contact our sales office in your area.
*Turn on/Turn off time
Input
90%
10%
Output
Toff
Ton
RECOMMENDED OPERATING CONDITIONS
Please obey the following conditions to ensure proper relay operation and resetting.
Item
Input LED current
Symbol
IF
Recommended value
Unit
5
mA
■ For Dimensions
■ For Schematic and Wiring Diagrams
■ For Cautions for Use
■ These products are not designed for automotive use.
If you are considering to use these products for automotive applications, please contact your local Panasonic Electric
Works technical representative.
For more information
REFERENCE DATA
1. Load current vs. ambient temperature
characteristics
2. Load current vs. Load voltage characteristics
Ambient temperature: 25°C 77°F
Allowable ambient temperature: –40°C to +85°C
–40°F to +185°F
Measured portion: between terminals 3 and 4
LED current: 5 mA; Load voltage: 10V (DC);
Load current: 80mA (DC)
200
25
150
100
50
On resistance, Ω
200
Load current, mA
Load current, mA
3. On resistance vs. ambient temperature
characteristics
150
100
20
15
10
50
5
0
–40
–20
0
20
40
60
8085 100
Ambient temperature, °C
0
0
5
10
15
20
Load voltage, V
25
30
0
–40 –20
0
20
40
60
8085
Ambient temperature, °C
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
PhotoMOS.book Page 161 Thursday, March 26, 2009 2:21 PM
RF SSOP 1 Form A C×R5 (AQY221N3V)
5. Turn off time vs. ambient temperature
characteristics
6. LED operate current vs. ambient
temperature characteristics
Measured portion: between terminals 3 and 4
LED current: 5 mA; Load voltage: 10V (DC);
Continuous load current: 80mA (DC)
Measured portion: between terminals 3 and 4
LED current: 5 mA; Load voltage: 10V (DC);
Continuous load current: 80mA (DC)
Measured portion: between terminals 3 and 4
Load voltage: 10V (DC);
Continuous load current: 80mA (DC)
0.1
0.08
0.08
0.06
0.04
2
LED operate current, mA
0.1
Turn off time, ms
Turn on time, ms
4. Turn on time vs. ambient temperature
characteristics
0.06
0.04
1.5
1
0.5
0.02
0
0.02
–40 –20
0
20
40
60
0
8085
–40 –20
Ambient temperature, °C
0
20
40
60
0
8085
–40 –20
Ambient temperature, °C
0
20
40
60
8085
Ambient temperature, °C
7. LED turn off current vs. ambient temperature
characteristics
8. LED dropout voltage vs. ambient
temperature characteristics
9. Current vs. voltage characteristics of output
at MOS portion
Measured portion: between terminals 3 and 4
Load voltage: 10V (DC);
Continuous load current: 80mA (DC)
LED current: 5 to 50 mA
Measured portion: between terminals 3 and 4
Ambient temperature: 25°C 77°F
LED dropout voltage, V
LED operate current, mA
1.5
1
0.5
Current, mA
1.5
2
1.4
150
100
50
1.3
–2 –1.5 –1 –0.5
50mA
1.2
0.5
30mA
20mA
1.1
1 1.5 2
Voltage, V
–50
10mA
–100
5mA
0
–40 –20
0
20
40
60
1.0
8085
–40 –20
0
20
40
60
–150
8085 100
Ambient temperature, °C
Ambient temperature, °C
10. Off state leakage current vs. load voltage
characteristics
11. Turn on time vs. LED forward current
characteristics
12. Turn off time vs. LED forward current
characteristics
Measured portion: between terminals 3 and 4
Ambient temperature: 25°C 77°F
Measured portion: between terminals 3 and 4
Load voltage: 10V (DC); Continuous load current:
80mA (DC); Ambient temperature: 25°C 77°F
Measured portion: between terminals 3 and 4
Load voltage: 10V (DC); Continuous load current:
80mA (DC); Ambient temperature: 25°C 77°F
0.1
10-5
10-7
Turn off time, ms
Turn on time, ms
Off state leakage current, A
0.12
10-3
0.09
0.08
0.06
0.06
0.04
10-9
0.03
0.02
10-11
10-13
0
0
5
10
15
20
25
Load voltage, V
30
0
10
20
30
40
50
0
60
0
10
20
30
40
50
60
LED forward current, mA
LED forward current, mA
14. Isolation vs. frequency characteristics
(50Ω impedance)
15. Insertion loss vs. frequency characteristics
(50Ω impedance)
Measured portion: between terminals 3 and 4
Frequency: 1 MHz, 30m Vrms; Ambient temperature:
25°C 77°F
Measured portion: between terminals 3 and 4
Ambient temperature: 25°C 77°F
Measured portion: between terminals 3 and 4
Ambient temperature: 25°C 77°F
100
2
80
1.5
2
Insertion loss, dB
2.5
Isolation, dB
Output capacitance, pF
13. Output capacitance vs. applied voltage
characteristics
60
1
40
0.5
20
1.5
1
0.5
0
0
5
10
15
20
25
Applied voltage, V
30
0 4
10
105
106
107
108
0
104
Frequency, Hz
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
105
106
Frequency, Hz
107
PhotoMOS.book Page 162 Thursday, March 26, 2009 2:21 PM
RF SSOP 1 Form A C×R5 (AQY221N3V)
16. On resistance distribution
17. Turn on time distribution
18. Turn off time distribution
Measured portion: between terminals 3 and 4
Continuous load current: 80mA (DC)
Ambient temperature: 25°C 77°F
Load voltage: 10V (DC)
Continuous load current: 80mA (DC)
Ambient temperature: 25°C 77°F
Load voltage: 10V (DC)
Continuous load current: 80mA (DC)
Ambient temperature: 25°C 77°F
50
40
60
35
50
25
20
Quantity, n
Quantity, n
Quantity, n
40
30
30
40
30
20
15
20
10
10
10
5
0
2
3
4
5
6
7
0
8
On resistance, Ω
0
0.02
0.04
0.06
0.08
0.1
0
0
0.02
Turn on time, ms
19. LED operate current distribution
Load voltage: 10V (DC)
Continuous load current: 80mA (DC)
Ambient temperature: 25°C 77°F
30
Quantity, n
25
20
15
10
5
0
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
LED operate current, mA
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
0.04
0.06
0.08
Turn on time, ms
0.1
Similar pages