Murata LFL182G45TC1A202 Filters for communication equipment Datasheet

Filters for Communication Equipment
for RF/Local
Chip Multilayer LC Filters (BPF)
o LFB18/21/2H/31_SG Series
0.6±0.1
+0.2
+0.10
(2)
0.8 -0.1
(4)
0.15±0.10
(1)
0.30-0.15 0.25±0.15
Frequency Characteristics
1.6±0.1
A
0
0
10
10
20
20
30
30
40
40
50
50
60
60
Attenuation (dB)
0.15±0.10
0.45±0.15 0.70±0.15
(1)(3) : GND
(2) : OUT
(4) : IN
LFB18_SG Series
70
A : Directional Input Mark
0.8
4.8
8.8
Return Loss (dB)
(3)
70
Frequency Range (GHz)
All the technical data and information contained
herein are subject to change without prior notice.
(in mm)
Frequency Characteristics
0.95±0.10
2.00±0.15
A
0.20±0.15 1.6+0.10
-0.15
(1)(3) : GND
(2) : OUT
(4) : IN
0
10
20
20
30
30
40
40
50
50
60
60
70
70
80
80
90
A : Directional Input Mark
0.5
2.5
3.0
90
Frequency Range (GHz)
All the technical data and information contained
herein are subject to change without prior notice.
(in mm)
0.3±0.2
Frequency Characteristics
(4)
1.5±0.1
(2)
0
10
20
20
30
30
40
40
50
50
60
60
A : Directional Input Mark
70
70
(1)(3) : GND
(2) : OUT
(4) : IN
80
80
0.5±0.2
(3)
+0.15
0.30 -0.20
0
10
LFB2H_SG6 Series
90
1.0
* All the technical data and information contained herein are
subject to change without prior notice.
(in mm)
3.5
6.0
Return Loss (dB)
(1)
Attenuation (dB)
A
2.0±0.2
2.5±0.2
0.75±0.20
Filters for Communication Equipment
7
LFB21_SG Series
0
10
Return Loss (dB)
+0.1
0.3-0.2
Attenuation (dB)
+0.10
0.3 -0.15
(3)
+0.1
(2)
0.3 -0.2
(4)
1.25±0.10
(1)
90
Frequency Range (GHz)
(2)
Attenuation (dB)
(3)
+0.15
0.30-0.20
(1)(3) : GND
(2) : OUT
(4) : IN
LFB2H_SG7 Series
0
5
20
10
30
15
40
20
50
25
60
30
70
35
80
40
90
A : Directional Input Mark
All the technical data and information contained
herein are subject to change without prior notice.
0
10
1.0
3.5
6.0
Return Loss (dB)
(4)
0.9±0.1
2.0±0.2
(1)
0.5±0.2
0.75±0.20
A
0.3±0.2
The Characteristics of Spurious
2.5±0.2
45
Frequency Range (GHz)
(in mm)
Continued on the following page.
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.12.25
Filters for Communication Equipment
Continued from the preceding page.
Frequency Characteristics
1.2±0.1
3.2±0.15
A : Directional Input Mark
(1) (3) : GND
(2) : OUT
(4) : IN
LFB31_SG1 Series
0
0
10
10
20
20
30
30
40
40
50
50
60
60
70
1100
* All the technical data and information contained herein are subject
to change without prior notice.
(in mm)
1600
Return Loss (dB)
Attenuation (dB)
(3)
1.9±0.15
0.3±0.2
0.65±0.2
0.55±0.2
(2)
1.6±0.15
(4)
0.5±0.15
0.3±0.2
(1)
A
70
2100
Frequency Range (MHz)
1.3±0.1
Directional
Input Mark
(3)
0.3±0.2
0.65±0.20
(2)
0.3±0.2
(4)
1.60±0.15
(1)
Attenuation (dB)
0.50±0.15 0.55±0.20
3.20±0.15
1.90±0.15
(1) GND
(2) OUT
(3) GND
(4) IN
(in mm)
LFB31_SG2 Series
All the technical data and Information contained herein are
subject to change without prior notice.
0
0
10
10
20
20
30
30
40
40
50
50
60
60
70
70
80
1.2
80
1.8
Return Loss (dB)
Frequency Characteristics
2.4
Frequency Range (GHZ)
(2)
(4)
0.3T0.2
(3)
0.3T0.2
0.65T0.20 1.90T0.15
Attenuation (dB)
1.60T0.15
(1)
(1)(3) : GND
(2)
: OUT
(4)
: IN
(in mm)
LFB31_SG3 Series
All the technical and Information contained herein are
subject to change without prior notice.
0
0
10
10
20
20
30
30
40
40
50
50
60
60
70
1.0
70
3.0
2.0
Frequency Range (GHz)
Return Loss (dB)
0.50T0.15
1.1T0.1
3.20T0.15
Directional
Input Mark
Filters for Communication Equipment
7
Frequency Characteristics
Frequency Characteristics
3.20±0.15
0.9±0.1
LFB31_SG7 Series
1.90±0.15
1.60±0.15
(1)(3) : GND
(2) : OUT
(4) : IN
(in mm)
All the technical data and information contained herein are
subject to change without prior notice.
0
0
10
10
20
20
30
30
40
40
50
50
60
60
70
1.95
2.45
Return Loss (dB)
0.65±0.20
0.3±0.2
Attenuation (dB)
(3)
Directional
Input Mark
0.3±0.2
(2)
(4)
0.50±0.15
(1)
70
3.95
Frequency Range (GHz)
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.12.25
Filters for Communication Equipment
Part Number
Nominal Center Bandwidth (BW)
Frequency (fo)
(MHz)
(MHz)
Insertion Loss
in BW
(dB)
Attenuation (Absolute Value) I)
(dB)
Attenuation (Absolute Value) II)
(dB)
2450
fo±50
2.2 max. (at 25°C)
24.5 min. at 880~960MHz
12.5 min. at 1710~1990MHz
LFB185G78SGAB713
5787.5
fo±62.5
2.2 max. (at 25°C)
16.5 min. at 4800MHz
23.5 min. at 11450~11700MHz
LFB211G90SG8B704
1906.5
fo±13.5
3.0 max. (at 25°C)
20 min. at 1660.5~1686.3MHz
11 min. at 2126.8~2152.6MHz
LFB212G45SG8A127
2450
fo±50
1.5 max. (at 25°C)
25 min. at 1200~1300MHz
10.0 min. at 2000MHz
LFB212G45SG8A166
2450
fo±50
1.4 max. (at 25°C)
30 min. at 880~915MHz
30 min. at 1710~1910MHz
LFB212G45SG8A192
2450
fo±50
2.6 max. (at 25°C)
40 min. at 880~960MHz
38 min. at 1710~1990MHz
LFB215G12SG8A178
5125
fo±225
1.5 max. (at 25°C)
25 min. at 4200MHz
17 min. at 2x(fo±225)MHz
LFB215G12SG8A183
5125
fo±225
1.5 max. (at 25°C)
10.0 min. at 4250MHz
10.0 min. at 5900MHz
LFB215G25SG8A144
5250
fo±100.0
1.5 max. (at 25°C)
30 min. at 3450MHz
-
LFB215G37SG8A180
5375
fo±475
1.8 max. (at 25°C)
29.5 min. at 500~4000MHz
34.5 min. at 3450MHz
LFB215G37SG8A185
5375
fo±475
2.2 max. (at 25°C)
40 min. at 340~1195MHz
21 min. at 2140~3580MHz
LFB215G51SG8A132
5512
fo±363
1.9 max. (at 25°C)
30 min. at 500~4000MHz
20 min. at 4600MHz
LFB215G51SG8A154
5512
fo±363
1.5 max. (at 25°C)
30 min. at 500~4000MHz
20 min. at 4600MHz
LFB215G78SG8A170
5787.5
fo±62.5
2.2 max. (at 25°C)
35 min. at 3275~3400MHz
37 min. at 2x(fo±62.5)MHz
LFB2H1G90SG6A157
1906.5
fo±13.5
1.5 max. (at 25°C)
14 min. at 1687MHz
6 min. at 2126MHz
LFB2H2G45SG7A134
2450
fo±50
1.7 max. (at 25°C)
25 min. at 1750MHz
25 min. at 2100MHz
LFB2H2G45SG7A135
2450
fo±50
2.7 max. (at 25°C)
40 min. at 880~915MHz
40 min. at 1710~1950MHz
LFB2H2G45SG7A158
2450
fo±50
1.2 max. (at 25°C)
30 min. at 880~915MHz
30 min. at 1710~1785MHz
LFB2H2G45SG7A159
2450
fo±50
2.1 max. (at 25°C)
45 min. at 880~915MHz
48 min. at 1710~1990MHz
LFB2H2G45SG7A204
2450
fo±50
3 max. (at 25°C)
45 min. at 880~915MHz
27 min. at 1710~1990MHz
LFB2H5G78SG7A175
5787.5
fo±62.5
2.5 max. (at 25°C)
51.5 min. at 902~928MHz
41 min. at 3919~4044MHz
LFB311G48SG1-985
1489
fo±12.0
1.5 max. (at 25°C)
25 min. at (fo±12.0)+260MHz
28 min. at 1749MHz
LFB311G90SG1-799
1906.5
40 min. at 1397.05~1422.85MHz
35 min. at 1645.5~1671.3MHz
LFB311G90SG2-797
1906.5
fo±13.5
2.7 max. (at 25°C)
40 min. at 1427~1454MHz
35 min. at 1660~1687MHz
7
LFB311G95SG3A564
1950
fo±30
3.5 max. (at 25°C)
20 min. at 2110~2170MHz
25 min. at 2490~2550MHz
Filters for Communication Equipment
LFB182G45SG9A246
LFB312G45SG2A509
2450
fo±50
2 max. (at 25°C)
38 min. at 902~928MHz
15 min. at 2100~2200MHz
LFB312G45SG7A572
2450
fo±50
2.5 max. (at 25°C)
37 min. at 902~928MHz
20 min. at 2100~2200MHz
fo +24.5/-13.5MHz 2.5 max. (at 25°C)
o LFB31_SL Series (1206)
Frequency Characteristics
3.2±0.15
1.1±0.1
(4)
(7)
(6)
Attenuation (dB)
(8)
+0.1
(5)
0.25 -0.15
0.35±0.15 0.45±0.15
+0.1
1.0±0.1 0.25 -0.15
0.5±0.1
(1)(3)(5)(7) :
(2)(6) :
(4) :
(8) :
NC
GND
OUT
IN
* All the technical data and information contained herein are
subject to change without prior notice.
(in mm)
Part Number
LFB311G40SL1A562
Nominal Center Bandwidth (BW)
Frequency (fo)
(MHz)
(MHz)
1402.5
fo±77.5
0
0
10
10
20
20
30
30
40
40
50
50
60
60
70
0.65
1.4
Frequency Range (GHz)
Return Loss (dB)
(3)
0.5±0.1
(2)
1.6±0.15
(1)
70
2.15
Insertion Loss
in BW
(dB)
Attenuation (Absolute Value) I)
(dB)
Attenuation (Absolute Value) II)
(dB)
3 max. (at 25°C)
20 min. at 1005~1080MHz
20 min. at 1725~1760MHz
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.12.25
Filters for Communication Equipment
o LFB31_SN Series (1206)
Frequency Characteristics
3.20±0.15
1.2±0.1
0.3±0.2
1.90±0.15
(1)(3) : GND
(2)
: OUT
(4)
: IN
(in mm)
0
0
10
10
20
20
30
30
40
40
50
50
60
60
70
3.0
8.0
Frequency Range (GHz)
All the technical data and information contained herein are subject to
change without prior notice.
Nominal Center Bandwidth (BW)
Frequency (fo)
(MHz)
(MHz)
5820
fo±30
Insertion Loss
in BW
(dB)
Attenuation (Absolute Value) I)
(dB)
Attenuation (Absolute Value) II)
(dB)
2 max. (at 25°C)
35 min. at 2000MHz
30 min. at 3000MHz
o LFB31_SP Series (1206)
Directional
Input Mark
(2)
0.25±0.15
(3)
0.25±0.15
0.95±0.15
(4)
1.60±0.15
(1)
1.35±0.20 0.50±0.15
(1) IN
(2) GND
(3) OUT
(4) GND
* All the technical data and Information contained herein are
subject to change without prior notice.
(in mm)
Part Number
Nominal Center Bandwidth (BW)
Frequency (fo)
(MHz)
(MHz)
Attenuation (dB)
1.3±0.1
0.325±0.200
Frequency Characteristics
3.20±0.15
0
0
10
10
20
20
30
30
40
40
50
50
60
60
70
0
70
3.0
1.5
Frequency Range (GHz)
Insertion Loss
in BW
(dB)
Attenuation (Absolute Value) I)
(dB)
Attenuation (Absolute Value) II)
(dB)
LFB311G89SP1A542
1890
fo±10.0
0.85 max. (at 25°C)
29 min. at 1416.9~1436.9Hz
22 min. at 900MHz
LFB311G90SP1-798
1906.5
fo±13.5
1.0 max. (at 25°C)
38 min. at 1405~1440MHz
12.0 min. at 1649~1680MHz
LFB312G45SP1A502
2450
fo±50
1.4 max. (at 25°C)
20 min. at 902~928MHz
35 min. at 1500~1550MHz
o LFB32_SB Series (1210)
7
Filters for Communication Equipment
LFB315G82SN5-996
70
13.0
Return Loss (dB)
Part Number
Return Loss (dB)
0.65±0.20
0.3±0.2
(3)
Directional
Input Mark
Attenuation (dB)
1.60±0.15
(2)
(4)
0.50±0.15
(1)
Frequency Characteristics
3.2±0.2
(1)
0
Attenuation (dB)
(2)
2.5±0.2
(3)
1.5±0.2
0.3±0.2
(4)
0.8±0.2
0.4±0.3
1.2±0.3
10
20
30
40
50
(1) : IN
(2) : GND
(3) : OUT
(4) : GND
(in mm)
60
70
900
1900
Frequency (MHz)
2900
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.12.25
Filters for Communication Equipment
Part Number
Nominal Center Bandwidth (BW)
Frequency (fo)
(MHz)
(MHz)
Insertion Loss
in BW
(dB)
Attenuation (Absolute Value) I)
(dB)
Attenuation (Absolute Value) II)
(dB)
20 min. at 2xfo MHz
LFB321G66SB1-560
1662
fo±12.5
2 max. (at 25°C)
27 min. at 1895~1918MHz
LFB321G89SB1-591
1890
fo±10.0
1.2 max. (at 25°C)
21 min. at 1655~1675MHz
15 min. at 2xfo MHz
LFB321G90SB1-559
1907.5
fo±12.5
1.0 max. (at 25°C)
35 min. at 1397.5~1440MHz
20 min. at 1646~1680MHz
o LFB32_SC Series (1210)
Frequency Characteristics
1.5±0.15
3.2±0.2
(2)
(3)
(8)
2.5±0.2
(4)
(7)
(6)
10
Attenuation (dB)
0.7±0.2
(1)
(5)
0.4±0.2
(1) : NC
(2) : GND
(3) : NC
(4) : OUT
1.0±0.2
0.1 min.
0.55±0.15
0.45±0.15
Nominal Center Bandwidth (BW)
Frequency (fo)
(MHz)
(MHz)
30
40
50
60
(5) : NC
(6) : GND
(7) : NC
(8) : IN
70
80
50
* Terminal of "NC" should not be connected to any pattern.
(in mm)
Part Number
20
300
Frequency (MHz)
550
Insertion Loss
in BW
(dB)
Attenuation (Absolute Value) I)
(dB)
Attenuation (Absolute Value) II)
(dB)
284
fo±4
3.8 max. (at 25°C)
31 min. at 220~228MHz
23 min. at 340~348MHz
LFB32312MSC1-597
312.25
fo±1.0
3.5 max. (at 25°C)
26 min. at 249.8MHz
26 min. at 374.7MHz
LFB32315MSC1-604
315
fo±0.5
3.5 max. (at 25°C)
45 min. at 180MHz
29 min. at 470MHz
7
LFB32315MSC1-619
315
fo±0
3.5 max. (at 25°C)
30 min. at 235MHz
30 min. at 395MHz
Filters for Communication Equipment
LFB32284MSC1-596
LFB32426MSC1-603
426.5
fo±0.5
3.6 max. (at 25°C)
25 min. at 366.5MHz
20 min. at 486.5MHz
LFB32820MSC2-749
820
fo±10.0
1.3 max. (at 25°C)
22 min. at 1070~1090MHz
-
LFB32847MSC2-766
847.5
fo±37.5
1.5 max. (at 25°C)
16 min. at 550~625MHz
15 min. at 1070~1145MHz
o LFB32_SJ Series (1210)
Frequency Characteristics
3.2±0.2
1.5±0.2
(3)
0.4±0.3
0.4min. 0.8±0.2 1.2±0.3
(1) : IN
(2)(4) : GND
(3) : OUT
* All the technical data and information contained herein are
subject to change without prior notice.
(in mm)
Part Number
LFB321G47SJ1-794
Nominal Center Bandwidth (BW)
Frequency (fo)
(MHz)
(MHz)
1472
fo±20
0
0
10
10
20
20
30
30
40
40
50
50
60
70
1.1
Return Loss (dB)
Attenuation (dB)
(2)
2.5±0.2
(4)
0.3±0.2
(1)
60
70
2.1
1.6
Frequency Range (GHz)
Insertion Loss
in BW
(dB)
Attenuation (Absolute Value) I)
(dB)
Attenuation (Absolute Value) II)
1.3 max. (at 25°C)
30 min. at 1172MHz
-
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.12.25
Filters for Communication Equipment
o LFB32_SK Series (1210)
Frequency Characteristics
1.5±0.15
3.2±0.2
(7)
0.55±0.15
0.1min.
(6)
Attenuation (dB)
(4)
(8)
(5)
0.3±0.2
0.45±0.15
0.3±0.2
1.0±0.2
(1)(3)(5)(7) :
(2)(6) :
(4) :
(8) :
NC
GND
OUT
IN
Nominal Center Bandwidth (BW)
Frequency (fo)
(MHz)
(MHz)
LFB32205MSK1-948
205.5
fo±31.5
0
10
20
20
30
30
40
40
50
50
60
60
70
0
* All the technical data and information contained herein are
subject to change without prior notice.
(in mm)
Part Number
0
10
Return Loss (dB)
(3)
2.5±0.2
(2)
0.7±0.2
(1)
70
510
255
Frequency Range (MHz)
Insertion Loss
in BW
(dB)
Attenuation (Absolute Value) I)
(dB)
Attenuation (Absolute Value) II)
(dB)
1.5 max. (at 25°C)
10.0 min. at 100MHz
20 min. at 500MHz
o LFB32_SN Series (1210)
Frequency Characteristics
1.5±0.1
3.2±0.2
0.3±0.15
(1) : GND
(2) : OUT
(3) : GND
(4) : IN
(in mm)
Part Number
Nominal Center Bandwidth (BW)
Frequency (fo)
(MHz)
(MHz)
0
10
20
20
30
30
40
40
50
50
60
60
70
1.0
3.5
Frequency Range (GHz)
7
70
6.0
Insertion Loss
in BW
(dB)
Attenuation (Absolute Value) I)
(dB)
Attenuation (Absolute Value) II)
(dB)
LFB321G74SN1-770
1747.5
fo±37.5
2.5 max. (at 25°C)
20 min. at D.C.~1350MHz
30 min. at 1350~1425MHz
LFB321G84SN1-796
1842.5
fo±37.5
2.5 max. (at 25°C)
48 min. at 500~1450MHz
40 min. at 1450~1480MHz
LFB321G90SN1-593
1907.5
fo±12.5
2.5 max. (at 25°C)
40 min. at 1406.5~1440MHz
35 min. at 1655~1680MHz
LFB322G45SN1-947
2450
fo±50
2.5 max. (at 25°C)
40 min. at 1950MHz
16 min. at 2200MHz
LFB322G45SN1A504
2450
fo±50
1.8 max. (at 25°C)
48 min. at 902~928MHz
50 min. at 1500~1550MHz
LFB322G45SN5A515
2450
fo±50
2.5 max. (at 25°C)
40 min. at 880~1250MHz
20 min. at 1250~1710MHz
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Filters for Communication Equipment
(3)
0
10
Return Loss (dB)
(2)
Attenuation (dB)
2.5±0.2
(4)
0.4±0.2
0.6±0.2
(1)
06.12.25
Filters for Communication Equipment
for RF/Local
Chip Multilayer LC Filters (LPF)
o LFL15_TC (0402) /LFL18_TC (0603) /LFL21_TC (0805) Series
1.00±0.05
A
Frequency Characteristics
0.4 max.
0.10±0.05
0.35±0.10 0.3±0.1
(1)(3) : GND
(2) : OUT
(4) : IN
LFL15_TC Series
0
0
10
5
20
10
30
15
40
20
50
25
60
30
70
35
80
40
90
A : Directional Input Mark
2.35
4.95
7.55
Return Loss (dB)
(3)
Attenuation (dB)
(2)
0.3±0.1
0.10±0.05
(4)
0.50±0.05
(1)
45
Frequency Range (GHz)
All the technical data and information contained
herein are subject to change without prior notice.
(in mm)
Frequency Characteristics
0.6±0.1
(2)
(3)
(6)
(5)
(4)
0.20 +0.10
-0.15
0.3±0.1
0.2±0.1
0.50±0.05
LFL18_TC Series
A : Pin 1 Marking
(1) :
(2)(4)(6) :
(3) :
(5) :
IN
GND
OUT
NC
0
0
10
10
20
20
30
30
40
40
50
50
60
60
70
0.5
All the technical data and Information contained herein are subject
to change without prior notice.
(in mm)
70
3.0
1.75
Frequency Range (GHz)
Frequency Characteristics
(8)
(4)
(7)
+0.1
0.3 -0.15
0.20±0.15
(6)
(5)
+0.1
0.3 -0.2
0.35±0.1
0.65±0.05
Attenuation (dB)
Directional
Input Mark
+0.1
0.3 -0.2
(1)(3)(5)(7) : GND
(2)(6) : NC
(4) : OUT
(8) : IN
LFL21_TC Series
Part Number
Terminal of "NC" should be fixed to no connected pattern.
* All the technical data and information contained herein are subject to
change without prior notice.
(in mm)
Nominal Center Bandwidth (BW)
Frequency (fo)
(MHz)
(MHz)
0
0
10
10
20
20
30
30
40
40
50
50
60
70
0.1
Return Loss (dB)
0.95±0.10
2.00±0.15
(1)
(2)
(3)
1.25±0.10
+0.1
0.3 -0.15
Filters for Communication Equipment
7
Attenuation (dB)
0.8±0.1
(1)
Return Loss (dB)
A
0.15±0.10
1.6±0.1
60
70
5.1
2.15
Frequency Range (GHz)
Insertion Loss
in BW
(dB)
Attenuation (Absolute Value) I)
(dB)
Attenuation (Absolute Value) II)
(dB)
21 min. at 3x(fo±50.0)MHz
LFL152G45TC1A219
2450
fo±50
0.45 max. (at 25°C)
21 min. at 2x(fo±50.0)MHz
LFL18815MTC2A072
815.5
fo±9.5
0.80 max. (at 25°C)
35 min. at 2x(fo±9.5)MHz
30 min. at 3x(fo±9.5)MHz
LFL18924MTC1A052
924.5
fo±35
0.40 max. (at 25°C)
20 min. at 2x(fo±35.0)MHz
15 min. at 3x(fo±35.0)MHz
LFL182G45TC1A108
2450
fo±50
0.37 max. (at 25°C)
27 min. at 4800~5000MHz
25 min. at 7200~7500MHz
LFL182G45TC1A202
2450
fo±50
0.40 max. (at 25°C)
27 min. at 4800~5000MHz
30 min. at 7200~7500MHz
LFL21600MTC1A002
600
fo±250
1.37 max. (at 25°C)
20 min. at 1550~4250MHz
9 min. at 1100MHz
LFL21847MTC1A006
847.5
fo±37.5
0.75 max. (at 25°C)
30 min. at 2x(fo±37.5)MHz
30 min. at 3x(fo±37.5)MHz
LFL21902MTC1A018
902.5
fo±12.5
0.6 max. (at 25°C)
30 min. at 2x(fo±12.5)MHz
30 min. at 3x(fo±12.5)MHz
LFL211G35TC1A001
1350.0
fo±250
0.92 max. (at 25°C)
25 min. at 2300~5000MHz
-
LFL211G44TC1A014
1441.0
fo±12.0
0.47 max. (at 25°C)
31 min. at 2xfoMHz
26 min. at 3xfoMHz
LFL211G79TC1A011
1795
fo±85
0.47 max. (at 25°C)
30 min. at 2x(1747.5±37.5)MHz
25 min. at 2x(1842.5±37.5)MHz
LFL211G89TC1A015
1890
fo±10.0
0.47 max. (at 25°C)
30 min. at 2x(fo±10.0)MHz
26 min. at 3x(fo±10.0)MHz
LFL211G90TC1A008
1907.5
fo±12.5
0.47 max. (at 25°C)
30 min. at 2x(fo±12.5)MHz
25 min. at 3x(fo±12.5)MHz
Continued on the following page.
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.12.25
Filters for Communication Equipment
Continued from the preceding page.
Part Number
Nominal Center Bandwidth (BW)
Frequency (fo)
(MHz)
(MHz)
Insertion Loss
in BW
(dB)
Attenuation (Absolute Value) I)
(dB)
Attenuation (Absolute Value) II)
(dB)
LFL211G92TC1A060
1920
fo±70
0.6 max. (at 25°C)
24 min. at 3335~3700MHz
30 min. at 3700~3820MHz
LFL212G45TC1A007
2450
fo±50
0.50 max. (at 25°C)
27 min. at 2x(fo±50.0)MHz
30 min. at 3x(fo±50.0)MHz
LFL215G25TC1A156
5250
fo±100.0
0.70 max. (at 25°C)
24 min. at 2x(fo±100)MHz
19 min. at 3x(fo±100)MHz
LFL215G37TC1A210
5375
fo±475
0.70 max. (at 25°C)
30 min. at 2x(fo±475)MHz
20 min. at 3x(fo±475)MHz
LFL215G51TC1A149
5512
fo±363
0.70 max. (at 25°C)
30 min. at 2x(fo±363)MHz
20 min. at 3x(fo±363)MHz
LFL215G78TC1A155
5787.5
fo±62.5
0.70 max. (at 25°C)
30 min. at 2x(fo±62.5)MHz
20 min. at 3x(fo±62.5)MHz
for RF/Local
Chip Multilayer LC Filters (HPF)
o LFH32_RA Series (1210)
Frequency Characteristics
3.2±0.2
(5)
0.4±0.2
0.1min. 0.45±0.15 1.0±0.2
(1)(3)(5)(7) : NC
(2)(6) : GND
(4) : OUT
(8) : IN
0.55±0.15
(in mm)
0
0
10
10
20
20
30
30
40
40
50
50
60
60
70
Terminal of "NC" should not be fixed to any pattern.
All the technical data and Information contained
herein are subject to change without prior notice.
Part Number
Nominal Center Bandwidth (BW)
Frequency (fo)
(MHz)
(MHz)
LFH32942MRA1A517
942.5
fo±17.5
200
700
1200
70
7
Frequency Range (MHz)
Insertion Loss
in BW
(dB)
Attenuation (Absolute Value) I)
(dB)
Attenuation (Absolute Value) II)
(dB)
0.5 max. (at 25°C)
4.5 min. at 480~600MHz
25 min. at 480MHz
for RF/Local
2.0±0.15
(1)
0.95±0.1
(3)
Directional
Input mark
(8)
+0.10
0.30-0.15
(2)
(7)
(6)
(5)
(3)
+0.10
+0.1
0.3 -0.2
0.15±0.10
0.65±0.15 0.30-0.15
(4)
+0.1
0.3 -0.15
0.2±0.15
A : Directional Input Mark
0.35±0.1
0.65±0.05
(1) : GND
(2) : P1 (*1)
(3) : P3 (*2)
(4) : P2 (*3)
(*1) Higher Frequency Port
(*2) Common Port
(*3) Lower Frequency Port
LFD18_DP Series
All the technical data and information contained
herein are subject to change without prior notice.
+0.1
0.6±0.1
0.3 -0.15
+0.2
(2)
0.8 -0.1
(4)
0.15±0.10
(1)
0.3 +0.1
-0.2
1.6±0.1
A
1.25±0.1
0.25±0.15
Chip Multilayer Diplexers
Filters for Communication Equipment
(6)
(7)
(4)
Attenuation (dB)
Directional
Input mark
(8)
Return Loss (dB)
(3)
2.5±0.2
(2)
0.4±0.2 0.7±0.2
(1)
1.5±0.15
(1)(2)(3)(5)(7) : GND
(4) : P1
(6) : P3 (∗)
(8) : P2
(∗) Common Port
LFD21_DP Series
All the technical data and information contained
herein are subject to change without prior notice.
(in mm)
(in mm)
Part Number
Frequency
Range[P1](f1)
(MHz)
Frequency
Range[P2](f2)
(MHz)
Insertion Loss
[P1-P3](in f1)
(dB)
Insertion Loss
[P2-P3](in f2)
(dB)
Attenuation
[P1-P3](in f2)
(dB)
Attenuation
[P2-P3](in f1)
(dB)
LFD182G45DP3A299
5375 ±475.0MHz
2450 ±50.0MHz
0.60 max. (at 25°C)
0.40 max. (at 25°C)
20 min.
20 min.
LFD212G45DP3A140
5250 ±100.0MHz
2450 ±50.0MHz
0.65 max. (at 25°C)
0.50 max. (at 25°C)
20 min.
20 min.
LFD212G45DP3A151
5487.5 ±337.5MHz
2450 ±50.0MHz
0.75 max. (at 25°C)
0.50 max. (at 25°C)
20 min.
16 min.
LFD212G45DP3A188
5375 ±475.0MHz
2450 ±50.0MHz
0.75 max. (at 25°C)
0.50 max. (at 25°C)
21 min.
17 min.
LFD212G45DP4A189
2450 ±50.0MHz
5375 ±475.0MHz
0.5 max. (at 25°C)
0.75 max. (at 25°C)
17 min.
21 min.
Continued on the following page.
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.12.25
Filters for Communication Equipment
Continued from the preceding page.
Part Number
Frequency
Range[P1](f1)
(MHz)
Frequency
Range[P2](f2)
(MHz)
Insertion Loss
[P1-P3](in f1)
(dB)
Insertion Loss
[P2-P3](in f2)
(dB)
Attenuation
[P1-P3](in f2)
(dB)
Attenuation
[P2-P3](in f1)
(dB)
LFD21859MDP1A049
LFD21859MDP2A076
1920 ±70.0MHz
859 ±35.0MHz
0.45 max. (at 25°C)
0.40 max. (at 25°C)
19 min.
20 min.
859 ±35.0MHz
1920 ±70.0MHz
0.40 max. (at 25°C)
0.45 max. (at 25°C)
20 min.
LFD21874MDP1A084
19 min.
1575.5 ±3.0MHz
874 ±51.0MHz
0.60 max. (at 25°C)
0.55 max. (at 25°C)
25 min.
23 min.
LFD21874MDP2A181
874 ±51.0MHz
1575.5 ±3.0MHz
0.55 max. (at 25°C)
0.60 max. (at 25°C)
23 min.
25 min.
LFD21884MDP1A062
1906.5 ±13.0MHz
884 ±74.0MHz
0.45 max. (at 25°C)
0.50 max. (at 25°C)
20 min.
20 min.
LFD21892MDP1A141
1850 ±140.0MHz
892 ±68.0MHz
0.60 max. (at 25°C)
0.40 max. (at 25°C)
19 min.
17 min.
LFD21892MDP2B860
892 ±68.0MHz
1850 ±140.0MHz
0.40 max. (at 25°C)
0.60 max. (at 25°C)
17 min.
19 min.
LFD21920MDP1A048
1795 ±85.0MHz
920 ±40.0MHz
0.55 max. (at 25°C)
0.50 max. (at 25°C)
20 min.
16 min.
for RF/Local
Chip Multilayer LC Filters (Trap)
2.0±0.15
(2)
0.50±0.25
(1)
1.25±0.15
0.95±0.15
Input Terminal
Marking
0.25±0.20
(1) : IN
(2) : OUT
(in mm)
Part Number
Center Frequency of Rejection Band
(MHz)
Pass Bandwidth (BW)
(MHz)
Insertion Loss in BW
(dB)
Attenuation (Absolute Value)
(dB)
LFE21560MHA1A004
560
810~885
0.7 max. (at 25°C)
10.0 min. at 550~570MHz
for RF/Local
Chip Multilayer LC Filters (Balanced Filters)
0.3 -0.15
(2)
(3)
(4)
(7)
(6)
(5)
+0.1
0.3 -0.2
+0.1
(8)
0.90±0.10
1.25±0.10
(1)
+0.10
2.00±0.15
A
0.3 -0.2
Filters for Communication Equipment
7
+0.10
0.30 -0.15 0.35±0.10
0.65±0.05
0.20±0.15
A : Directional Input Mark
(1) : NC
(2) : NC (DC feed Port)
(3) : Unbalance Port
(4)(6)(8) : GND
(5)(7) : Balance Port
LFB21_BA Series
* All the technical data and information contained herein are
subject to change without prior notice.
(in mm)
Part Number
Nominal Center Bandwidth
Frequency (fo)
(BW)
(MHz)
(MHz)
Insertion
Loss in BW
(dB)
Balance Impedance
(Differential) (Nom.)
(ohm)
Unbalance Impedance
(Nom.)
(ohm)
LFB212G45BA1A220
2450.00
fo±50.00
3.5 max. (at 25°C) 34.2 -j95.0ohm (Differential) Source Impedance
50
LFB212G45BA1A234
2450.00
fo±50.00
3.5 max. (at 25°C)
50
50
LFB212G45BA1B763
2450.00
fo±50.00
3.5 max. (at 25°C)
50 +j50ohm (Differential) Source Impedance
50
LFB215G37BA1A233
5375.00
fo±475.00
2.8 max. (at 25°C)
100
50
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.12.25
Filters for Communication Equipment
for RF/Local
SAW Filters
o GPS
2.5 ± 0.2
1.0 max.
Marking : Laser Printing
∗ : EIAJ Code
(1) : Input
(3)(4) : Output
Others : Ground
2-0.25±0.05
(1)
(C0.3)
SAFSE1G57KC0T00
5-0.25±0.05
2-0.25±0.05
R2-0.12
(2)
(in mm)
Center
Frequency
(MHz)
Insertion Loss
(dB)
SAFEB1G57KB0F00
1575.42
0.8 max.
(1574.22MHz~1576.62MHz)
SAFEB1G57KA0F00
1575.5
1.5 max.
(1574MHz~1577MHz)
SAFEB1G57FM0F00
1575.42
2.3 max.
(1574.22MHz~1576.62MHz)
SAFEB1G57FL0F00
1575.42
2.7 max.
(1574.42MHz~1576.42MHz)
SAFSE1G57KC0T00
1575.5
2.5 max.
(1574MHz~1577MHz)
0.7
(1574MHz~1577MHz)
SAFSD1G57FA0T00
1575.5
1.6 max.
(1574MHz~1577MHz)
SAFSE1G57KA0T05
1575.5
1.6 max.
(1574MHz~1577MHz)
SAFSE1G57KA0T09
1575.42
2 max.
(1574.42MHz~1576.42MHz)
(0.50)
4-0.88 ± 0.15
2-0.74 ± 0.10
(4)
Marking : Laser Printing
∗ : EIAJ Code
Pin
(1) : Input
(3) : Output
Others : Ground
(3)
(in mm)
Input
Impedance
Output
Impedance
50ohm
50ohm
50ohm
50ohm
0.6
1.5max.
(1574.22MHz~1576.62MHz) (1574.22MHz~1576.62MHz)
50ohm
100ohm
0.5
1.7max.
(1574.42MHz~1576.42MHz) (1574.42MHz~1576.42MHz)
50ohm
200ohm
1.6max
(1574MHz~1577MHz)
50ohm
50ohm
0.5
(1574MHz~1577MHz)
1.6max.
(1574MHz~1577MHz)
50ohm
100ohm
0.7
(1574MHz~1577MHz)
1.6max.
(1574MHz~1577MHz)
50ohm
50ohm
50ohm
50ohm
Ripple (dB max.)
VSWR
0.5
2.0max.
(1574.22MHz~1576.62MHz) (1574.22MHz~1576.62MHz)
0.6
(1574MHz~1577MHz)
1.8max.
(1574MHz~1577MHz)
1.5
1.8max.
(1574.42MHz~1576.42MHz) (1574.42MHz~1576.42MHz)
7
Filters for Communication Equipment
(5) (4)
(0.25)
2-0.74 ± 0.10
4-0.63 ± 0.15
(0.075)
2-0.25±0.05
5-0.325±0.050
(2) (3)
(0.05)
Part Number
∗
4-1.25 ± 0.15
(1)
SAFEB1G57KB0F00
M
R4-0.15
(0.20)
0.6 max.
∗
Dot Marking(ø0.4)
2.0 ± 0.2
1.05±0.05
1.35±0.05
Dot Marking
(ø0.3)
o GSM850
1.05±0.05
(0.05)
(5) (4)
2-0.25±0.05
Marking : Laser Printing
∗ : EIAJ Code
(1)
SAFED881MFL0F05
(0.075)
5-0.25±0.05
2-0.25±0.05
(0.20)
0.6 max.
(1) : Input
(3)(4) : Output
Others : Ground
(2) (3)
(0.075)
Marking : Laser Printing
∗ : EIAJ Code
2-0.35±0.05
5-0.45±0.05
(0.075)
2-0.25±0.05
5-0.325±0.050
(2) (3)
∗
(0.20)
0.6 max.
∗
(1)
SAFEB881MFL0F00
Dot Marking
(ø0.3)
1.4±0.1
2.0±0.1
1.35±0.05
Dot Marking
(ø0.3)
2-0.325±0.050
(in mm)
(5) (4)
(1) : Input
(3)(4) : Output
Others : Ground
5-0.40±0.05
2-0.325±0.050
(in mm)
Center
Frequency
(MHz)
Insertion Loss
(dB)
Ripple (dB max.)
VSWR
Input
Impedance
Output
Impedance
SAFEB881MFL0F00
881.5
2.3 max.
(869MHz~894MHz)
1.2
(869MHz~894MHz)
1.8max.
(869MHz~894MHz)
50ohm
150ohm//82nH
SAFED881MFL0F05
881.5
2.0 max.
(869MHz~894MHz)
1.1
(869MHz~894MHz)
1.8max.
(869MHz~894MHz)
50ohm
150ohm//68nH
Part Number
Continued on the following page.
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.12.25
Filters for Communication Equipment
Continued from the preceding page.
Center
Frequency
(MHz)
Insertion Loss
(dB)
Ripple (dB max.)
VSWR
Input
Impedance
Output
Impedance
SAFEH881MFM0F00
881.5
2.4 max.
(869MHz~894MHz)
1.5
(869MHz~894MHz)
1.9max.
(869MHz~894MHz)
50ohm
150ohm//82nH
SAFEF881MAL0F00
881.5
2.6 max.
(869MHz~894MHz)
1.4
(869MHz~894MHz)
1.7max.
(869MHz~894MHz)
50ohm
50ohm
SAFSD881MFL0T50
881.5
3 max.
(869MHz~894MHz)
1.4
(869MHz~894MHz)
2max.
(869MHz~894MHz)
50ohm
200ohm//82nH
Part Number
o GSM850/GSM900 Dual Band
2.0±0.1
M
∗
Filters for Communication Equipment
7
(0.075) (9) (8) (7) (6)
6-0.27±0.05
8-0.26±0.05
Marking : Laser Printing
∗ : EIAJ Code
(1) : Input
(4) : Input
(8)(9) : Output
(6)(7) : Output
Others : Ground
(C0.15)
(1) (2) (3) (4)
SAWES881MCQ0F00(942.5)
2-0.70±0.05
(10)
8-0.325±0.050
8-0.40±0.05
(0.075)
(5)
4-0.27±0.05
SAWEP881MCQ0F00(942.5)
2-0.26±0.05
0.65±0.05
(C0.15) (10)
8-0.325±0.050
(1) (2) (3) (4)
(5)
Marking : Laser Printing
∗ : EIAJ Code
4-0.35±0.05
(0.20)
0.6 max.
0.45±0.05
(0.2)
0.6 max.
Dot Marking (ø0.3)
2-0.35±0.05
∗
2.0±0.1
2.5±0.1
1.6±0.1
Dot Marking
(ø0.3)
Pin
(1) : Input
(4) : Input
(8)(9) : Output
(6)(7) : Output
Others : Ground
(9) (8) (7) (6)
6-0.35±0.05
(in mm)
(in mm)
Part Number
Center
Frequency
(MHz)
Insertion Loss
(dB)
Ripple (dB max.)
VSWR
Input
Impedance
Output
Impedance
SAWEP881MCQ0F00(881.5)
881.5
2.0 max.
(869MHz~894MHz)
1.1
(869MHz~894MHz)
2.0max.
(869MHz~894MHz)
50ohm
150ohm//82nH
SAWEP881MCQ0F00(942.5)
942.5
2.4 max.
(925MHz~960MHz)
1.5
(925MHz~960MHz)
2.1max.
(925MHz~960MHz)
50ohm
150ohm//82nH
SAWEP881MCP0F00(881.5)
881.5
2.0 max.
(869MHz~894MHz)
1.1
(869MHz~894MHz)
2.0max.
(869MHz~894MHz)
50ohm
150ohm//82nH
SAWEP881MCP0F00(942.5)
942.5
2.4 max.
(925MHz~960MHz)
1.5
(925MHz~960MHz)
2.1max.
(925MHz~960MHz)
50ohm
150ohm//82nH
SAWES881MCQ0F00(881.5)
881.5
2.1 max.
(869MHz~894MHz)
1.0
(869MHz~894MHz)
1.9max.
(869MHz~894MHz)
50ohm
150ohm//68nH
SAWES881MCQ0F00(942.5)
942.5
2.9 max.
(925MHz~960MHz)
1.7
(925MHz~960MHz)
2.2max.
(925MHz~960MHz)
50ohm
150ohm//56nH
o GSM850/GSM1900 Dual Band
2.0±0.1
Dot Marking (ø0.4)
M
∗
(0.2)
0.6 max.
∗
(0.44)
(0.19)
0.9 max.
M
Dot Marking (ø0.3)
R4-0.15
2.5±0.2
3.0±0.2
2.5±0.1
SAWES881MCU2F00(881.5)
8-0.325±0.050
(5)
(9) (8) (7) (6)
6-0.35±0.05
(1) : Input
(4) : Input
(8)(9) : Output
(6)(7) : Output
Others : Ground
(in mm)
SAWSP881MGA0T00(881.5)
(1)
(8)
(2) (3)
(C0.3)
(7)
(6)
6-0.60±0.15
4-0.65±0.10
2-0.50±0.10
(5)
(4)
(0.40)
6-0.50±0.15
Pin
2-0.50±0.10
Marking : Laser Printing
∗ : EIAJ Code
4-0.50±0.10
(0.40) R0.12
4-0.35±0.05
2-0.70±0.05
(10)
8-0.40±0.05
(C0.15)
(1) (2) (3) (4)
2-0.35±0.05
4-1.50±0.15
Marking : Laser Printing
∗ : EIAJ Code
Pin
(1) : Input (Low-ch)
(3) : Input (High-ch)
(7) : Output (Low-ch)
(5) : Output (High-ch)
Others : Ground
(in mm)
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.12.25
Filters for Communication Equipment
Part Number
Center
Frequency
(MHz)
Insertion Loss
(dB)
Ripple (dB max.)
VSWR
Input
Impedance
Output
Impedance
SAWES881MCU2F00(881.5)
881.5
2.1 max.
(869MHz~894MHz)
1.0
(869MHz~894MHz)
1.9max.
(869MHz~894MHz)
50ohm
150ohm//68nH
SAWES881MCU2F00(1960)
1960
3 max.
(1930MHz~1990MHz)
1.9
(1930MHz~1990MHz)
2.4max.
(1930MHz~1990MHz)
50ohm
150ohm//22nH
SAWSP881MGA0T00(881.5)
881.5
2.9 max.
(869MHz~894MHz)
1.5
(869MHz~894MHz)
2max.
(869MHz~894MHz)
50ohm
50ohm
SAWSP881MGA0T00(1960)
1960
3.2 max.
(1930MHz~1990MHz)
2
(1930MHz~1990MHz)
2.4max.
(1930MHz~1990MHz)
50ohm
50ohm
SAWSU881MCQ0T01(881.5)
881.5
3 max.
(869MHz~894MHz)
1.8
(869MHz~894MHz)
2max.
(869MHz~894MHz)
50ohm
200ohm//56nH
SAWSU881MCQ0T01(1960)
1960
3 max.
(1930MHz~1990MHz)
2.4
(1930MHz~1990MHz)
2.2max.
(1930MHz~1990MHz)
50ohm
200ohm//15nH
o GSM900
(0.05)
(5) (4)
2-0.25±0.05
(0.075)
0.6 max.
(1) : Input
(3)(4) : Output
Others : Ground
(2) (3)
2-0.35±0.05
5-0.45±0.05
Marking : Laser Printing
∗ : EIAJ Code
Marking : Laser Printing
∗ : EIAJ Code
(1)
SAFED942MFM0F00
(0.075)
5-0.25±0.05
2-0.25±0.05
(0.20)
2-0.325±0.050
(in mm)
(5) (4)
(1) : Input
(3)(4) : Output
Others : Ground
7
5-0.40±0.05
2-0.325±0.050
(in mm)
Center
Frequency
(MHz)
Insertion Loss
(dB)
Ripple (dB max.)
VSWR
Input
Impedance
Output
Impedance
SAFEB942MFL0F00
942.5
2.7 max.
(925MHz~960MHz)
1.7
(925MHz~960MHz)
2max.
(925MHz~960MHz)
50ohm
150ohm//82nH
SAFED942MFM0F00
942.5
2.2 max.
(925MHz~960MHz)
1.3
(925MHz~960MHz)
2.1max.
(925MHz~960MHz)
50ohm
150ohm//82nH
SAFEH942MFN0F00
942.5
2.7 max.
(925MHz~960MHz)
1.8
(925MHz~960MHz)
2max.
(925MHz~960MHz)
50ohm
150ohm//82nH
SAFEF942MAL0F00
942.5
3 max.
(925MHz~960MHz)
1.7
(925MHz~960MHz)
2.1max.
(925MHz~960MHz)
50ohm
50ohm
SAFSD942MFM0T00
942.5
3.2 max.
(925MHz~960MHz)
2.2
(925MHz~960MHz)
2.3max.
(925MHz~960MHz)
50ohm
200ohm//82nH
SAFSD942MCL0T00
942.5
3.3 max.
(925MHz~960MHz)
1.8
(925MHz~960MHz)
2max.
(925MHz~960MHz)
50ohm
50ohm
SAFSE942MAL0T05
942.5
3.2 max.
(925MHz~960MHz)
2
(925MHz~960MHz)
2.2max.
(925MHz~960MHz)
50ohm
50ohm
Part Number
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Filters for Communication Equipment
1.05±0.05
(0.075)
2-0.25±0.05
5-0.325±0.050
(2) (3)
∗
(0.20)
0.6 max.
∗
(1)
SAFEB942MFL0F00
Dot Marking
(ø0.3)
1.4±0.1
2.0±0.1
1.35±0.05
Dot Marking
(ø0.3)
06.12.25
Filters for Communication Equipment
o GSM900/GSM1800 Dual Band
2.0±0.1
M
∗
Filters for Communication Equipment
7
(0.075) (9) (8) (7) (6)
6-0.27±0.05
8-0.26±0.05
Marking : Laser Printing
∗ : EIAJ Code
(1) : Input
(4) : Input
(8)(9) : Output
(6)(7) : Output
Others : Ground
(C0.15)
(1) (2) (3) (4)
SAWES942MCQ0F00(942.5)
2-0.70±0.05
(10)
8-0.325±0.050
8-0.40±0.05
(0.075)
(5)
4-0.27±0.05
SAWEP942MCN0F00(942.5)
2-0.26±0.05
0.65±0.05
(C0.15) (10)
8-0.325±0.050
(1) (2) (3) (4)
(5)
Marking : Laser Printing
∗ : EIAJ Code
4-0.35±0.05
(0.20)
0.6 max.
0.45±0.05
(0.2)
0.6 max.
Dot Marking (ø0.3)
2-0.35±0.05
∗
2.0±0.1
2.5±0.1
1.6±0.1
Dot Marking
(ø0.3)
Pin
(1) : Input
(4) : Input
(8)(9) : Output
(6)(7) : Output
Others : Ground
(9) (8) (7) (6)
6-0.35±0.05
(in mm)
(in mm)
Part Number
Center
Frequency
(MHz)
Insertion Loss
(dB)
Ripple (dB max.)
VSWR
Input
Impedance
Output
Impedance
SAWEP942MCN0F00(942.5)
942.5
2.3 max.
(925MHz~960MHz)
1.3
(925MHz~960MHz)
2.1max.
(925MHz~960MHz)
50ohm
150ohm//82nH
SAWEP942MCN0F00(1842.5)
1842.5
2.2 max.
(1805MHz~1880MHz)
1.2
(1805MHz~1880MHz)
2.2max.
(1805MHz~1880MHz)
50ohm
150ohm//15nH
SAWES942MCQ0F00(942.5)
942.5
2.9 max.
(925MHz~960MHz)
1.7
(925MHz~960MHz)
2.2max.
(925MHz~960MHz)
50ohm
150ohm//56nH
SAWES942MCQ0F00(1842.5)
1842.5
2.6 max.
(1805MHz~1880MHz)
1.7
(1805MHz~1880MHz)
2.4max.
(1805MHz~1880MHz)
50ohm
150ohm//15nH
SAWES942MCM0F00(942.5)
942.5
2.8 max.
(925MHz~960MHz)
1.5
(925MHz~960MHz)
2max.
(925MHz~960MHz)
50ohm
150ohm//56nH
SAWES942MCM0F00(1842.5)
1842.5
3 max.
(1805MHz~1880MHz)
1.8
(1805MHz~1880MHz)
2.2max.
(1805MHz~1880MHz)
50ohm
150ohm//18nH
SAWES942MCQ0F05(942.5)
942.5
2.9 max.
(925MHz~960MHz)
1.7
(925MHz~960MHz)
2.2max.
(925MHz~960MHz)
50ohm
150ohm//56nH
SAWES942MCQ0F05(1842.5)
1842.5
2.6 max.
(1805MHz~1880MHz)
1.7
(1805MHz~1880MHz)
2.4max.
(1805MHz~1880MHz)
50ohm
150ohm//15nH
SAWSP942MLD0T00(942.5)
942.5
3 max.
(925MHz~960MHz)
2
(925MHz~960MHz)
2.5max.
(925MHz~960MHz)
50ohm
50ohm
SAWSP942MLD0T00(1842.5)
1842.5
3.2 max.
(1805MHz~1880MHz)
2
(1805MHz~1880MHz)
2.5max.
(1805MHz~1880MHz)
50ohm
50ohm
SAWSU942MCS0T01(942.5)
942.5
3.2 max.
(925MHz~960MHz)
2.2
(925MHz~960MHz)
2.4max.
(925MHz~960MHz)
50ohm
200ohm//47nH
SAWSU942MCS0T01(1842.5)
1842.5
3.2 max.
(1805MHz~1880MHz)
2.2
(1805MHz~1880MHz)
2.5max.
(1805MHz~1880MHz)
50ohm
200ohm//16nH
o GSM1800
1.05±0.05
(0.05)
2-0.25±0.05
(5) (4)
(2) (3)
(1)
SAFED1G84FB0F00
(0.075)
5-0.25±0.05
2-0.325±0.050
(in mm)
(0.075)
Marking : Laser Printing
∗ : EIAJ Code
2-0.35±0.05
0.6 max.
(0.20)
(1) : Input
(3)(4) : Output
Others : Ground
2-0.25±0.05
∗
5-0.45±0.05
(0.075)
(2) (3)
2-0.25±0.05
5-0.325±0.050
0.6 max.
∗
(1)
SAFEB1G84FA0F00
Dot Marking
(ø0.3)
1.4±0.1
2.0±0.1
1.35±0.05
Dot Marking
(ø0.3)
(5) (4)
(0.20)
Marking : Laser Printing
∗ : EIAJ Code
(1) : Input
(3)(4) : Output
Others : Ground
5-0.40±0.05
2-0.325±0.050
(in mm)
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.12.25
Filters for Communication Equipment
Center
Frequency
(MHz)
Insertion Loss
(dB)
Ripple (dB max.)
VSWR
Input
Impedance
Output
Impedance
SAFEB1G84FA0F00
1842.5
2.5 max.
(1805~1880MHz)
1.5
(1805MHz~1880MHz)
2.2max.
(1805MHz~1880MHz)
50ohm
150ohm//18nH
SAFED1G84FB0F00
1842.5
2.0 max.
(1805~1880MHz)
1.3
(1805MHz~1880MHz)
2.5max.
(1805MHz~1880MHz)
50ohm
150ohm//18nH
SAFEH1G84FB0F00
1842.5
2.5 max.
(1805~1880MHz)
1.5
(1805MHz~1880MHz)
2.2max.
(1805MHz~1880MHz)
50ohm
150ohm//18nH
SAFEF1G84AA0F00
1842.5
2.8 max.
(1805~1880MHz)
1.7
(1805MHz~1880MHz)
2.2max.
(1805MHz~1880MHz)
50ohm
50ohm
SAFSE1G84KA0T00
1842.5
3.2 max.
(1805~1880MHz)
2.2
(1805MHz~1880MHz)
2.8max.
(1805MHz~1880MHz)
50ohm
50ohm
SAFSD1G84FA0T00
1842.5
3 max.
(1805~1880MHz)
2
(1805MHz~1880MHz)
2.7max.
(1805MHz~1880MHz)
50ohm
200ohm//27nH
SAFSD1G84CB0T00
1842.5
3.8 max.
(1805~1880MHz)
2
(1805MHz~1880MHz)
2.7max.
(1805MHz~1880MHz)
50ohm
50ohm
SAFCC1G74KA0T00
1747.5
4.2 max.
(1710MHz~1785MHz)
2.6
(1710MHz~1785MHz)
2.5max.
(1710MHz~1785MHz)
50ohm
50ohm
Part Number
o GSM1800/GSM1900 Dual Band
2.0±0.1
M
∗
(0.20)
(0.075) (9) (8) (7) (6)
6-0.27±0.05
8-0.26±0.05
(1) (2) (3) (4)
SAWES1G84CQ0F00(1960)
2-0.70±0.05
(10)
8-0.325±0.050
(5)
4-0.35±0.05
(1) : Input
(4) : Input
(8)(9) : Output
(6)(7) : Output
Others : Ground
(C0.15)
8-0.40±0.05
(0.075)
(5)
Marking : Laser Printing
∗ : EIAJ Code
(9) (8) (7) (6)
6-0.35±0.05
Marking : Laser Printing
∗ : EIAJ Code
Pin
(1) : Input
(4) : Input
(8)(9) : Output
(6)(7) : Output
Others : Ground
(in mm)
(in mm)
Part Number
Center
Frequency
(MHz)
Insertion Loss
(dB)
Ripple (dB max.)
VSWR
Input
Impedance
Output
Impedance
SAWEP1G84CQ0F00(1842.5)
1842.5
2.5 max.
(1805MHz~1880MHz)
1.5
(1805MHz~1880MHz)
2.2max.
(1805MHz~1880MHz)
50ohm
150ohm//15nH
1960
2.6 max.
(1930MHz~1990MHz)
1.8
(1930MHz~1990MHz)
2.2max.
(1930MHz~1990MHz)
50ohm
150ohm//18nH
1842.5
2.6 max.
(1805MHz~1880MHz)
1.7
(1805MHz~1880MHz)
2.4max.
(1805MHz~1880MHz)
50ohm
150ohm//15nH
1960
3.0 max.
(1930MHz~1990MHz)
1.9
(1930MHz~1990MHz)
2.4max.
(1930MHz~1990MHz)
50ohm
150ohm//22nH
SAWEP1G84CQ0F00(1960)
SAWES1G84CQ0F00(1842.5)
SAWES1G84CQ0F00(1960)
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Filters for Communication Equipment
SAWEP1G84CQ0F00(1960)
2-0.26±0.05
0.65±0.05
(C0.15) (10)
7
4-0.27±0.05
(1) (2) (3) (4)
8-0.325±0.050
0.6 max.
0.45±0.05
(0.2)
0.6 max.
Dot Marking (ø0.3)
2-0.35±0.05
∗
2.0±0.1
2.5±0.1
1.6±0.1
Dot Marking
(ø0.3)
06.12.25
Filters for Communication Equipment
o GSM1900
1.05±0.05
(0.05)
(5) (4)
2-0.25±0.05
0.6 max.
(1) : Input
(3)(4) : Output
Others : Ground
(0.075)
(2) (3)
Marking : Laser Printing
∗ : EIAJ Code
(1) : Input
(3)(4) : Output
Others : Ground
(1)
SAFED1G96FA0F00
(0.075)
5-0.25±0.05
(5) (4)
2-0.325±0.050
5-0.40±0.05
2-0.325±0.050
(in mm)
(in mm)
Center
Frequency
(MHz)
Insertion Loss
(dB)
Ripple (dB max.)
VSWR
Input
Impedance
Output
Impedance
SAFEB1G96FA0F00
1960
2.6 max.
(1930~1990MHz)
1.8
(1930MHz~1990MHz)
2.2max.
(1930MHz~1990MHz)
50ohm
150ohm//27nH
SAFED1G96FA0F00
1960
2.9 max.
(1930~1990MHz)
1.8
(1930MHz~1990MHz)
2.4max.
(1930MHz~1990MHz)
50ohm
150ohm//18nH
SAFEH1G96FB0F00
1960
2.6 max.
(1930~1990MHz)
1.8
(1930MHz~1990MHz)
2.2max.
(1930MHz~1990MHz)
50ohm
150ohm//22nH
SAFEF1G96AA0F00
1960
2.8 max.
(1930~1990MHz)
1.7
(1930MHz~1990MHz)
2.4max.
(1930MHz~1990MHz)
50ohm
50ohm
SAFSE1G96KD0T00
1960
3 max.
(1930~1990MHz)
2
(1930MHz~1990MHz)
2.5max.
(1930MHz~1990MHz)
50ohm
50ohm
SAFSD1G96FB0T00
1960
3 max.
(1930~1990MHz)
2.4
(1930MHz~1990MHz)
2.4max.
(1930MHz~1990MHz)
50ohm
200ohm//22nH
Part Number
o J-CDMA
1.05±0.05
(0.05)
(5) (4)
2-0.25±0.05
∗
2-0.65±0.05
(1) (2) (3)
(C0.15)
SAFEF906MAM0F00
(6) (5) (4)
(0.075)
4-0.363±0.050
6-0.375±0.050
5-0.25±0.05
2-0.25±0.05
(0.20)
0.6 max.
(1) : Input
(3)(4) : Output
Others : Ground
(0.075)
Marking : Laser Printing
∗ : EIAJ Code
(1)
SAFEB911MAL0F00
M
6-0.40±0.05
(0.075)
2-0.25±0.05
(2) (3)
Dot Marking (ø0.3)
(0.20)
0.6 max.
∗
1.6±0.1
2.0±0.1
1.35±0.05
Dot Marking
(ø0.3)
5-0.325±0.050
Filters for Communication Equipment
(0.20)
2-0.35±0.05
Marking : Laser Printing
∗ : EIAJ Code
2-0.25±0.05
7
5-0.45±0.05
(0.075)
2-0.25±0.05
5-0.325±0.050
(2) (3)
∗
(0.20)
0.6 max.
∗
(1)
SAFEB1G96FA0F00
Dot Marking
(ø0.3)
1.4±0.1
2.0±0.1
1.35±0.05
Dot Marking
(ø0.3)
(in mm)
Marking : Laser Printing
∗ : EIAJ Code
(2) : Input
(4)(6) : Output
Others : Ground
(in mm)
Center
Frequency
(MHz)
Insertion Loss
(dB)
Ripple (dB max.)
VSWR
Input
Impedance
Output
Impedance
SAFEB911MAL0F00
911.5
2.2 max.
(898MHz~925MHz)
1.2
(898MHz~925MHz)
2.0max.
(898MHz~925MHz)
50ohm
50ohm
SAFEB856MCM0F00
856.5
2.2 max.
(843MHz~870MHz)
1.2
(843MHz~870MHz)
2.0max.
(843MHz~870MHz)
50ohm
100ohm
SAFEF906MAM0F00
906
3.2 max.
(887MHz~925MHz)
1.5
(887MHz~925MHz)
2.4max.
(887MHz~925MHz)
50ohm
50ohm
SAFSE906MAM0T00
906
4 max.
(887MHz~925MHz)
2.5
(887MHz~925MHz)
2.4max.
(887MHz~925MHz)
50ohm
50ohm
SAFSE851MKB0T00
851
3.4 max.
(832MHz~870MHz)
2.5
(832MHz~870MHz)
2.2max.
(832MHz~870MHz)
50ohm
50ohm
SAFSD906MCL0T00
906
4.2 max.
(887MHz~925MHz)
2.5
(887MHz~925MHz)
2.8max.
(887MHz~925MHz)
50ohm
50ohm
Part Number
Continued on the following page.
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.12.25
Filters for Communication Equipment
Continued from the preceding page.
Part Number
Center
Frequency
(MHz)
Insertion Loss
(dB)
Ripple (dB max.)
VSWR
Input
Impedance
Output
Impedance
851
2.6 max.
(832MHz~870MHz)
1.9
(832MHz~870MHz)
2.7max.
(832MHz~870MHz)
50ohm
100ohm//56nH
SAFSD851MXA0T00
o PCS(CDMA)
2.5 ± 0.2
R4-0.15
∗
(0.25)
4-1.25 ± 0.15
(1)
(0.50)
4-0.88 ± 0.15
2-0.74 ± 0.10
Marking : Laser Printing
∗ : EIAJ Code
R2-0.12
(2)
(C0.3)
SAFSE1G88KC0T00
2-0.74 ± 0.10
4-0.63 ± 0.15
1.0 max.
M
2.0 ± 0.2
Dot Marking(ø0.4)
(4)
Pin
(1) : Input
(3) : Output
Others : Ground
(3)
(in mm)
Center
Frequency
(MHz)
Insertion Loss
(dB)
Ripple (dB max.)
VSWR
Input
Impedance
Output
Impedance
SAFSE1G88KC0T00
1880
5 max.
(1850MHz~1910MHz)
3.5
(1850MHz~1910MHz)
2.2max.
(1850MHz~1910MHz)
50ohm
50ohm
SAFSD1G96FL0T00
1960
4 max.
(1930MHz~1990MHz)
2
(1930MHz~1990MHz)
2.1max.
(1930MHz~1990MHz)
50ohm
100ohm
Part Number
o W-CDMA
1.05±0.05
(0.05)
(5) (4)
2-0.25±0.05
0.6 max.
(1) (2) (3)
Marking : Laser Printing
∗ : EIAJ Code
(C0.15)
SAFEH2G14FA0F00
(6) (5) (4)
(0.075)
4-0.363±0.050
6-0.375±0.050
5-0.25±0.05
2-0.25±0.05
(0.20)
2-0.65±0.05
(1) : Input
(3)(4) : Output
Others : Ground
(0.075)
Marking : Laser Printing
∗ : EIAJ Code
(1)
SAFEB2G14FA0F00
∗
6-0.40±0.05
(0.075)
2-0.25±0.05
5-0.325±0.050
(2) (3)
M
Dot Marking (ø0.3)
(0.20)
0.6 max.
∗
1.6±0.1
2.0±0.1
1.35±0.05
Dot Marking
(ø0.3)
(in mm)
(2) : Input
(4)(6) : Output
Others : Ground
(in mm)
Center
Frequency
(MHz)
Insertion Loss
(dB)
Ripple (dB max.)
VSWR
Input
Impedance
Output
Impedance
SAFEB2G14FA0F00
2140
2.3 max.
(2110~2170MHz)
1.2
(2110MHz~2170MHz)
1.8max.
(2110MHz~2170MHz)
50ohm
200ohm//27nH
SAFEB1G95KA0F00
1950
2.9 max.
(1920~1980MHz)
2.0
(1920MHz~1980MHz)
2max.
(1920MHz~1980MHz)
50ohm
50ohm
SAFEB1G95FL0F00
1950
2.6 max.
(1920~1980MHz)
1.3
(1920MHz~1980MHz)
1.8max.
(1920MHz~1980MHz)
200ohm//27nH
50ohm
SAFEH2G14FA0F00
2140
2.3 max.
(2110~2170MHz)
1.2
(2110MHz~2170MHz)
1.8max.
(2110MHz~2170MHz)
50ohm
200ohm//27nH
SAFEH1G95FL0F00
1950
2.8 max.
(1920~1980MHz)
1.5
(1920MHz~1980MHz)
2max.
(1920MHz~1980MHz)
200ohm//33nH
50ohm
SAFEF1G95KA0F00
1950
3 max.
(1920~1980MHz)
1.7
(1920MHz~1980MHz)
2max.
(1920MHz~1980MHz)
50ohm
50ohm
Part Number
Filters for Communication Equipment
7
Continued on the following page.
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.12.25
Filters for Communication Equipment
Continued from the preceding page.
Center
Frequency
(MHz)
Insertion Loss
(dB)
Ripple (dB max.)
VSWR
Input
Impedance
Output
Impedance
SAFZE1G95KD0F00
1950
3.2 max.
(1920~1980MHz)
1.5
(1920MHz~1980MHz)
2.6max.
(1920MHz~1980MHz)
50ohm
50ohm
SAFZD2G14FC0F00
2140
2.7 max.
(2110~2170MHz)
1.3
(2110MHz~2170MHz)
2.3max.
(2110MHz~2170MHz)
50ohm
100ohm
SAFSE2G14KB0T00
2140
2.7 max.
(2110~2170MHz)
1.3
(2110MHz~2170MHz)
2max.
(2110MHz~2170MHz)
50ohm
50ohm
SAFSD2G14FA0T00
2140
2.7 max.
(2110MHz~2170MHz)
1.5
(2110MHz~2170MHz)
2.2max
(2110MHz~2170MHz)
50ohm
200ohm//22nH
SAFSD1G95FA0T00
1950
3.2 max.
(1920~1980MHz)
1.6
(1920MHz~1980MHz)
2.1max.
(1920MHz~1980MHz)
200ohm//22nH
50ohm
Part Number
o CDMA800/TDMA800/E-AMPS/GSM850
1.05±0.05
1.35±0.05
Dot Marking
(ø0.3)
(0.20)
(0.075)
(2) (3)
2-0.25±0.05
5-0.325±0.050
0.6 max.
∗
Marking : Laser Printing
∗ : EIAJ Code
(1) : Input
(3)(4) : Output
Others : Ground
(1)
SAFEB881MFM0F00
(0.05)
(5) (4)
2-0.25±0.05
Filters for Communication Equipment
7
5-0.25±0.05
2-0.25±0.05
(in mm)
Center
Frequency
(MHz)
Insertion Loss
(dB)
Ripple (dB max.)
VSWR
Input
Impedance
Output
Impedance
SAFEB881MFM0F00
881.5
2.2 max.
(869MHz~894MHz)
1.5
(869MHz~894MHz)
2.0max.
(869MHz~894MHz)
50ohm
100ohm
SAFEB836MAL0F00
836.5
2.5 max.
(824MHz~849MHz)
1.8
(824MHz~849MHz)
1.9max.
(824MHz~849MHz)
50ohm
50ohm
SAFEF836MAL0F00
836.5
2.8 max.
(824MHz~849MHz)
1.4
(824MHz~849MHz)
1.9max.
(824MHz~849MHz)
50ohm
50ohm
Part Number
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.12.25
Similar pages