PRODUCT DATASHEET Lenina series last update 31/10/2016 DETAILS Product Number CN12640_LENINA-W Family Lenina Type RefPack Color metal Diameter 74 mm Height 46,95 mm Style round Optic Material Holder Material Fastening screw Status production ready ROHS Comliant Yes Date Updated 31/10/2016 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector CXA2011 50 deg Wide 86 % 1.200 - May 31st 2017 6:47 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 A B C D 40 4 4 h2 Material of optional sublens: PC, clear 3 3 Base material PC, white 2 74 Reflector material PC 2 NOTE: Using optional sublens, add 2.1mm to the system height Dimension 'h2' varies from 4.5mm to 7mm depending on the LED specific base part 1 This drawing is our property. It can't be reproduced or communicated without our written agreement. DRAWN BY DATE ks 23.04.2014 CHECKED BY DATE DESIGNED BY pl DATE 08.03.2012 D Ledil Oy Salorankatu 10 FIN-24240 SALO Finland DRAWING TITLE Datasheet Lenina series SIZE DRAWING NUMBER A4 SCALE 1:1 WEIGHT(g) REV -- 1 SHEET A 1/1 1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.