DIODE MODULE DD110F/KD110F UL;E76102 （M） Power Diode Module DD110F series are designed for various rectifier circuits. DD110F has two diode chips connected in series in 25mm (1inch) width package and the mounting base is elctrically isolated from elements for simple heatsink construction. Wide voltage rating up to, 1,600V is avaiable for various input voltage. 2- 6 92 20 20 ● Isolated 25 12.5 12 mounting base elements in a package for simple (single and three phase) bridge connections ● Highly reliable glass passivated chips ● High surge current capability 20 ● Two DD ３ ２ １ 6.5 31max 19.5 4.0 （Applications） Various rectifiers, Battery chargers, DC motor drives M5X10 80±0.2 ２ ３ １ KD Unit：a ■Maximum Ratings Symbol （Tj＝25℃ unless otherwise specified） Item Ratings DD110F40 DD110F80 DD110F120 DD110F160 Unit VRRM Repetitive Peak Reverse Voltage 400 800 1200 1600 V VRSM Non-Repetitive Peak Reverse Voltage 480 960 1300 1700 V Ratings Unit Symbol Item Conditions IF（AV） Average Forward Current Single phase, half wave, 180°conduction, Tc：88℃ IF (RMS) R.M.S. Forward Current Single phase, half wave, 180°conduction, Tc：88℃ IFSM Surge Forward Current 1 ／2 cycle, It Value for one cycle of surge current It 2 VISO 2 50/60HZ, peak value, non-repetitive Isolation Breakdown Voltage（R.M.S） A.C.1minute 110 A 172 A A 2300/2550 26500 A2S 2500 V Tj Junction Temperature −40 to ＋125 ℃ Tstg Storage Temperature −40 to ＋125 ℃ N･m （㎏f･B） Mounting Torque Mounting（M5） Recommended Value 1.5-2.5（15-25） 2.7（28） Terminal（M5） Recommended Value 1.5-2.5（15-25） 2.7（28） Mass 170 g ■Electrical Characteristics Symbol Item IRRM Repetitive Peak Reverse Current, max. at VDRM, single phase, half wave. Tj＝125℃ VFM Forward Voltage Drop, max. Forward current 350A，Tj＝25℃，Inst. measurement Junction to case 0.25 ℃/W Rth（j-c） Thermal Impedance, max. SanRex Conditions Ratings Unit 20 mA 1.45 V ® 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected] DD110F/KD110F ２２０ ５ Forward Current（A） Average Forward Current vs. Power Dissipation Per one element ２００ １８０ Power Dissipation Pav（W） １０３ Maximum Forward Characteristics D.C. １６０ ２ Single Phase Three Phase １４０ １０２ １２０ １００ ５ ２ １０１ ５ ０ １ ２ ３ ４ ８０ Max. ６０ ４０ ２０ ０ ５ ２０ ３０００ Per one element Surge Forward Current（A） １２０ １１０ ８０ ７０ D.C. Three Phase Single Phase １００ ９０ ６０ ５０ ０ ２０ ４０ ６０ ８０ ６０ Per one element Ｔ ｊ=２５℃ start ２５００ ２０００ １５００ 60Hz 50Hz １０００ ５００ ０ １００ １００ １２０ １４０ １６０ １８０ ２ ５ １０１ ２ １０２ ５ Time（Cycles） Transient Thermal Impedance Per one element Junction to Case ０.４ ０.３ ０.２ ０.１ １０ー１ １００ １０１ Time t（sec） Output Current Total Power Dissipation（W） ９００ １０ー２ １０２ １０３ １０４ B２；Two Pluse Bridge connection ８００ Id（Av） ７００ ６００ Rth:1.0℃/W Rth:0.8℃/W Rth:0.6℃/W Rth:0.4℃/W Rth:0.2℃/W Rth:0.1℃/W B2 ５００ ４００ ９０ １００ ３００ １１０ ２００ １００ ０ １２０ １００ ２００ Output Current（A） ０ ４０ ８０ １２０ Ambient Temperature（℃） １２５ ９００ Total Power Dissipation（W） ０ ー３ １０ Allowable Case Temperature（℃） Transient Thermal Impedance θj-c（℃/W） １００ １２０ １４０ １６０ １８０ Cycle Surge Forward Current Rating （Non-Repetitive） Average Forward Current（A） ０.５ ８０ Output Current B６；Six pulse Bridge connection ９０ ８００ Id(AV) ７００ B6 ６００ Rth:1.0℃/W Rth:0.8℃/W Rth:0.6℃/W Rth:0.4℃/W Rth:0.2℃/W Rth:0.1℃/W ５００ ４００ １００ １１０ ３００ ２００ １２０ １００ ０ １００ ２００ ０ ４０ ８０ １２０ Allowable Case Temperature（℃） Allowable Case Temperature Tc（℃） Average Forward Current vs. Allowable Case Temperature １３０ ４０ Average Forward Current（A） Forward Voltage Drop（V） １２５ Output Current（A） Ambient Temperature（℃） SanRex 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected]