Anaren A125N50X4 Chip termination 125 watts, 50î© Datasheet

ROHS
Compliant
Model A125N50X4
Chip Termination
125 Watts, 50Ω
Description
The A125N50X4 is high performance Aluminum Nirtride (AlN) chip
termination intended as an alternative to Beryllium Oxide (BeO). The
termination is well suited to all cellular frequency bands such as; AMPS,
GSM, DCS, PCS, PHS and UMTS. The high power handling makes the
part ideal for terminating circulators and for use in power combiners. The
termination is also RoHS compliant!
General Specifications
Features:
• RoHS Compliant
• 125 Watts
• DC – 4.0 GHz
• AlN Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
• Small Size
Resistive Element
Substrate
Terminal Finish
Operating Temperature
Thick film
AlN Ceramic
Matte Tin over Nickel Barrier
-55 to +150°C (see de rating chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value:
Power:
Frequency Range:
Return Loss
50 Ohms, ± 2%
125 Watts
DC – 4.0 GHz
> 26 dB to 2.7 GHz
> 20 dB to 4.0 GHz
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
Outline Drawing
A125N50X4 (097) rev.D pg.1 of 2
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Model A125N50X4
Typical Performance:
Return Loss
Power De-rating:
Tape & Reel:
Mounting Footprint and Procedure:
A125N50X4 (097) rev.D pg. 2 of 2
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Available on Tape and
Reel For Pick and Place
Manufacturing.
Similar pages