1.6X0.8mm PHOTOTRANSISTOR Part Number: AP1608P1C Description Features z 1.6mmX0.8mm SMT LED, 1.1mm THICKNESS. Made with NPN silicon phototransistor chips. z MECHANICALLY AND SPECTRALLY MATCHED TO INFRARED EMITTING LED LAMP. z WATER CLEAR LENS. z PACKAGE: 2000PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z RoHS COMPLIAN Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2.Tolerance is ±0.1(0.004") unless otherwise noted 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAD1375 REV NO: V.10 APPROVED: WYNEC CHECKED: Allen Liu DATE: DEC/21/2007 DRAWN: S.P.Chen PAGE: 1 OF 5 ERP:1203000037 Electrical / Optical Characteristics at TA=25°C Symbol Parameter Min. VBR CEO Collector-to-Emitter Breakdown Voltage VBR ECO Emitter-to-Collector Breakdown Voltage VCE (SAT) Collector-to-Emitter Saturation Voltage Collector Dark Current I CEO Typ. Max. Units Test Conditions 30 V IC=100uA Ee=0mW/c ㎡ 5 V IE=100uA Ee=0mW/c ㎡ 0.8 V IC=2mA Ee=20mW/c ㎡ 100 nA VCE=10V Ee=0mW/c ㎡ TR Rise Time (10％ to 90％ ) 15 us TF Fall Time (90％ to 10％ ) 15 us 0.3 mA 120 deg I (ON) On State Collector Current 2θ1/2 Viewing Angle 0.1 VCE = 5V IC=1mA RL=1000Ω VCE = 5V Ee=1mW/c ㎡ λ=940nm Absolute Maximum Ratings at TA=25°C Parameter Max.Ratings Collector-to-Emitter Voltage 30V Emitter-to-Collector Voltage 5V Power Dissipation at (or below) 25°C Free Air Temperature 100mW Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C SPEC NO: DSAD1375 REV NO: V.10 APPROVED: WYNEC CHECKED: Allen Liu DATE: DEC/21/2007 DRAWN: S.P.Chen PAGE: 2 OF 5 ERP:1203000037 AP1608P1C Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAD1375 REV NO: V.10 APPROVED: WYNEC CHECKED: Allen Liu DATE: DEC/21/2007 DRAWN: S.P.Chen PAGE: 3 OF 5 ERP:1203000037 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAD1375 REV NO: V.10 APPROVED: WYNEC CHECKED: Allen Liu AP1608P1C DATE: DEC/21/2007 DRAWN: S.P.Chen PAGE: 4 OF 5 ERP:1203000037 AP1608P1C SPEC NO: DSAD1375 REV NO: V.10 APPROVED: WYNEC CHECKED: Allen Liu DATE: DEC/21/2007 DRAWN: S.P.Chen PAGE: 5 OF 5 ERP:1203000037