NSC CD4066BCM Quad bilateral switch Datasheet

CD4066BM/CD4066BC Quad Bilateral Switch
General Description
The CD4066BM/CD4066BC is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with CD4016BM/
CD4016BC, but has a much lower ‘‘ON’’ resistance, and
‘‘ON’’ resistance is relatively constant over the input-signal
range.
Features
Y
Y
Y
Y
Y
Y
Y
Y
Wide supply voltage range
3V to 15V
High noise immunity
0.45 VDD (typ.)
g 7.5 VPEAK
Wide range of digital and
analog switching
‘‘ON’’ resistance for 15V operation
80X
Matched ‘‘ON’’ resistance
DRON e 5X (typ.)
over 15V signal input
‘‘ON’’ resistance flat over peak-to-peak signal range
High ‘‘ON’’/‘‘OFF’’
65 dB (typ.)
@ f e 10 kHz, R e 10 kX
output voltage ratio
is
L
High degree linearity
0.1% distortion (typ.)
@ f e 1 kHz, V e 5V
High degree linearity
is
is
p-p,
High degree linearity
VDDbVSS e 10V, RL e 10 kX
Y
Y
Y
Y
Extremely low ‘‘OFF’’
0.1 nA (typ.)
@ V
switch leakage
DD b VSS e 10V, TA e 25§ C
Extremely high control input impedance
1012X(typ.)
b 50 dB (typ.)
Low crosstalk
@ f e 0.9 MHz, R e 1 kX
between switches
is
L
Frequency response, switch ‘‘ON’’
40 MHz (typ.)
Applications
Y
Y
Y
Y
Y
Analog signal switching/multiplexing
# Signal gating
# Squelch control
# Chopper
# Modulator/Demodulator
# Commutating switch
Digital signal switching/multiplexing
CMOS logic implementation
Analog-to-digital/digital-to-analog conversion
Digital control of frequency, impedance, phase, and analog-signal-gain
Schematic and Connection Diagrams
Order Number CD4066B
Dual-In-Line Package
TL/F/5665 – 1
Top View
C1995 National Semiconductor Corporation
TL/F/5665
RRD-B30M105/Printed in U. S. A.
CD4066BM/CD4066BC Quad Bilateral Switch
June 1992
Absolute Maximum Ratings (Notes 1 & 2)
Recommended Operating
Conditions (Note 2)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales
Office/Distributors for availability and specifications.
Supply Voltage (VDD)
Input Voltage (VIN)
Storage Temperature Range (TS)
Power Dissipation (PD)
Dual-In-Line
Small Outline
Lead Temperature (TL)
(Soldering, 10 seconds)
Supply Voltage (VDD)
Input Voltage (VIN)
Operating Temperature Range (TA)
CD4066BM
CD4066BC
b 0.5V to a 18V
b 0.5V to VDD a 0.5V
b 65§ C to a 150§ C
3V to 15V
0V to VDD
b 55§ C to a 125§ C
b 40§ C to a 85§ C
700 mW
500 mW
300§ C
DC Electrical Characteristics CD4066BM (Note 2)
Symbol
Parameter
b 55§ C
Conditions
Min
IDD
Quiescent Device Current
VDD e 5V
VDD e 10V
VDD e 15V
a 25§ C
Max
Min
a 125§ C
Min
Units
Typ
Max
Max
0.25
0.5
1.0
0.01
0.01
0.01
0.25
0.5
1.0
7.5
15
30
mA
mA
mA
800
310
200
270
120
80
1050
400
240
1300
550
320
X
X
X
SIGNAL INPUTS AND OUTPUTS
RON
DRON
‘‘ON’’ Resistance
D‘‘ON’’ Resistance
Between any 2 of
4 Switches
IIS
Input or Output Leakage
Switch ‘‘OFF’’
VDDbVSS
2
VC e VDD, VIS e VSS to VDD
e
VDD 5V
VDD e 10V
VDD e 15V
VDDbVSS
RL e 10 kX to
2
VC e VDD, VIS e VSS to VDD
VDD e 10V
VDD e 15V
RL e 10 kX to
10
5
VC e 0
VIS e 15V and 0V,
VOS e 0V and 15V
X
X
g 50
g 0.1
g 50
g 500
nA
1.5
3.0
4.0
2.25
4.5
6.75
1.5
3.0
4.0
1.5
3.0
4.0
V
V
V
CONTROL INPUTS
VILC
Low Level Input Voltage
VIS e VSS and VDD
VOS e VDD and VSS
IIS e g 10 mA
VDD e 5V
VDD e 10V
VDD e 15V
VIHC
High Level Input Voltage
VDD e 5V
VDD e 10V (see note 6)
VDD e 15V
IIN
Input Current
VDDbVSS e 15V
VDDtVIStVSS
VDDtVCtVSS
3.5
7.0
11.0
3.5
7.0
11.0
g 0.1
2.75
5.5
8.25
3.5
7.0
11.0
g 10 b 5
V
V
V
g 0.1
g 1.0
mA
DC Electrical Characteristics CD4066BC (Note 2)
Symbol
Parameter
Conditions
b 40§ C
Min
IDD
Quiescent Device Current
VDD e 5V
VDD e 10V
VDD e 15V
Max
1.0
2.0
4.0
2
a 25§ C
Min
a 85§ C
Typ
Max
0.01
0.01
0.01
1.0
2.0
4.0
Min
Units
Max
7.5
15
30
mA
mA
mA
DC Electrical Characteristics
Symbol
Parameter
(Continued) CD4066BC (Note 2)
b 40§ C
Conditions
Min
Max
a 25§ C
Min
a 85§ C
Typ
Max
Min
270
120
80
1050
400
240
Units
Max
SIGNAL INPUTS AND OUTPUTS
RON
DRON
‘‘ON’’ Resistance
D‘‘ON’’ Resistance
Between Any 2 of
4 Switches
IIS
Input or Output Leakage
Switch ‘‘OFF’’
VDDbVSS
2
VC e VDD, VSS to VDD
VDD e 5V
VDD e 10V
VDD e 15V
VDDbVSS
RL e 10 kX to
2
VCC e VDD, VIS e VSS to VDD
e
VDD 10V
VDD e 15V
RL e 10 kX to
850
330
210
1200
520
300
10
5
VC e 0
X
X
X
X
X
g 50
g 0.1
g 50
g 200
nA
1.5
3.0
4.0
2.25
4.5
6.75
1.5
3.0
4.0
1.5
3.0
4.0
V
V
V
CONTROL INPUTS
VILC
Low Level Input Voltage
VIS e VSS and VDD
VOS e VDD and VSS
IIS e g 10mA
VDD e 5V
VDD e 10V
VDD e 15V
VIHC
High Level Input Voltage
VDD e 5V
VDD e 10V (See note 6)
VDD e 15V
IIN
Input Current
VDDbVSS e 15V
VDDtVIStVSS
VDDtVCtVSS
3.5
7.0
11.0
3.5
7.0
11.0
g 0.3
2.75
5.5
8.25
3.5
7.0
11.0
g 10 b 5
g 0.3
V
V
V
g 1.0
mA
AC Electrical Characteristics* TA e 25§ C, tr e tf e 20 ns and VSS e 0V unless otherwise noted
Symbol
Parameter
tPHL, tPLH
Propagation Delay Time Signal
Input to Signal Output
tPZH, tPZL
tPHZ, tPLZ
Conditions
VC e VDD, CL e 50 pF, (Figure 1 )
RL e 200k
VDD e 5V
VDD e 10V
VDD e 15V
Propagation Delay Time
Control Input to Signal
Output High Impedance to
Logical Level
RL e 1.0 kX, CL e 50 pF, (Figures 2 and 3 )
VDD e 5V
VDD e 10V
VDD e 15V
Propagation Delay Time
Control Input to Signal
Output Logical Level to
High Impedance
Sine Wave Distortion
RL e 1.0 kX, CL e 50 pF, (Figures 2 and 3 )
VDD e 5V
VDD e 10V
VDD e 15V
VC e VDD e 5V, VSS eb5V
RL e 10 kX, VIS e 5Vp-p, f e 1 kHz,
(Figure 4 )
VC e VDD e 5V, VSS eb5V,
RL e 1 kX, VIS e 5Vp-p,
20 Log10 VOS/VOS (1 kHz)bdB,
(Figure 4 )
Frequency Response-Switch
‘‘ON’’ (Frequency at b3 dB)
3
Min
Typ
Max
Units
25
15
10
55
35
25
ns
ns
ns
125
60
50
ns
ns
ns
125
60
50
0.1
ns
ns
ns
%
40
MHz
AC Electrical Characteristics* (Continued) TA e 25§ C, tr e tf e 20 ns and VSS e 0V unless otherwise noted
Symbol
Parameter
Feedthrough Ð Switch ‘‘OFF’’
(Frequency at b50 dB)
Crosstalk Between Any Two
Switches (Frequency at b50 dB)
Crosstalk; Control Input to
Signal Output
Maximum Control Input
Conditions
Min
Typ
VDD e 5.0V, VCC e VSS eb5.0V,
RL e 1 kX, VIS e 5.0Vp-p, 20 Log10,
VOS/VIS eb50 dB, (Figure 4)
VDD e VC(A) e 5.0V; VSS e VC(B) e 5.0V,
RL1 kX, VIS(A) e 5.0 Vp-p, 20 Log10,
VOS(B)/VIS(A) eb50 dB (Figure 5)
VDD e 10V, RL e 10 kX, RIN e 1.0 kX,
VCC e 10V Square Wave, CL e 50 pF
(Figure 6)
RL e 1.0 kX, CL e 50 pF, (Figure 7)
VOS(f) e (/2 VOS(1.0 kHz)
VDD e 5.0V
VDD e 10V
VDD e 15V
1.25
Max
Units
0.9
MHz
150
mVp-p
6.0
8.0
8.5
MHz
MHz
MHz
CIS
Signal Input Capacitance
8.0
pF
COS
Signal Output Capacitance
VDD e 10V
8.0
pF
CIOS
Feedthrough Capacitance
VC e 0V
0.5
CIN
Control Input Capacitance
5.0
pF
7.5
pF
*AC Parameters are guaranteed by DC correlated testing.
Note 1: ‘‘Absolute Maximum Ratings’’ are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices
should be operated at these limits. The tables of ‘‘Recommended Operating Conditions’’ and ‘‘Electrical Characteristics’’ provide conditions for actual device
operation.
Note 2: VSS e 0V unless otherwise specified.
Note 3: These devices should not be connected to circuits with the power ‘‘ON’’.
Note 4: In all cases, there is approximately 5 pF of probe and jig capacitance in the output; however, this capacitance is included in CL wherever it is specified.
Note 5: VIS is the voltage at the in/out pin and VOS is the voltage at the out/in pin. VC is the voltage at the control input.
Note 6: Conditions for VIHC: a) VIS e VDD, IOS e standard B series IOH
b) VIS e 0V, IOL e standard B series IOL.
AC Test Circuits and Switching Time Waveforms
FIGURE 1. tPHL, tPLH Propagation Delay Time Signal Input to Signal Output
FIGURE 2. tPZH, tPHZ Propagation Delay Time Control to Signal Output
TL/F/5665 – 2
FIGURE 3. tPZL, tPLZ Propagtion Delay Time Control to Signal Output
4
AC Test Circuits and Switching Time Waveforms (Continued)
VC e VDD for distortion and frequency response tests
VC e VSS for feedthrough test
FIGURE 4. Sine Wave Distortion, Frequency Response and Feedthrough
FIGURE 5. Crosstalk Between Any Two Switches
FIGURE 6. Crosstalk: Control Input to Signal Output
TL/F/5665 – 3
FIGURE 7. Maximum Control Input Frequency
5
Typical Performance Characteristics
‘‘ON’’ Resistance vs Signal
Voltage for TA e 25§ C
‘‘ON’’ Resistance as a Function
of Temperature for
VDDbVSS e 15V
‘‘ON’’ Resistance as a Function
of Temperature for
VDDbVSS e 10V
‘‘ON’’ Resistance as a Function
of Temperature for
VDDbVSS e 5V
TL/F/5665 – 4
Special Considerations
drawing VDD current when switch current flows into terminals 1, 4, 8 or 11, the voltage drop across the bidirectional
switch must not exceed 0.6V at TAs25§ C, or 0.4V at
TAl25§ C (calculated from RON values shown).
No VDD current will flow through RL if the switch current
flows into terminals 2, 3, 9 or 10.
In applications where separate power sources are used to
drive VDD and the signal input, the VDD current capability
should exceed VDD/RL (RL e effective external load of the 4
CD4066BM/CD4066BC bilateral switches). This provision
avoids any permanent current flow or clamp action of the
VDD supply when power is applied or removed from
CD4066BM/CD4066BC.
In certain applications, the external load-resistor current
may include both VDD and signal-line components. To avoid
6
Physical Dimensions inches (millimeters)
Cerdip (J)
Order Number CD4066BMJ or CD4066BCJ
NS Package Number J14A
S.O. Package (M)
Order Number CD4066BCM
NS Package Number M14A
7
CD4066BM/CD4066BC Quad Bilateral Switch
Physical Dimensions inches (millimeters) (Continued)
Dual-In-Line Package (N)
Order Number CD4066BMN or CD4066BCN
NS Package Number N14A
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and whose
failure to perform, when properly used in accordance
with instructions for use provided in the labeling, can
be reasonably expected to result in a significant injury
to the user.
National Semiconductor
Corporation
1111 West Bardin Road
Arlington, TX 76017
Tel: 1(800) 272-9959
Fax: 1(800) 737-7018
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
National Semiconductor
Europe
Fax: (a49) 0-180-530 85 86
Email: cnjwge @ tevm2.nsc.com
Deutsch Tel: (a49) 0-180-530 85 85
English Tel: (a49) 0-180-532 78 32
Fran3ais Tel: (a49) 0-180-532 93 58
Italiano Tel: (a49) 0-180-534 16 80
National Semiconductor
Hong Kong Ltd.
13th Floor, Straight Block,
Ocean Centre, 5 Canton Rd.
Tsimshatsui, Kowloon
Hong Kong
Tel: (852) 2737-1600
Fax: (852) 2736-9960
National Semiconductor
Japan Ltd.
Tel: 81-043-299-2309
Fax: 81-043-299-2408
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.