Transient Voltage Suppressors for ESD Protection SOD123 Series TVS/ESD Uni-directional Description Bi-directional The SOD123 Series TVS/ESD is designed specifically to protect sensitive electronic equipment from voltage transients induced by ESD,lightning surge and other transient voltage events. Features u u u u u u u u u u u u u u u u u u u Compatible with industrial standard package SOD-123 For surface mounted applications in order to optimize board space Low leakage Uni and Bidirectional unit Glass passivated junction Low inductance Excellent clamping capability 200W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% Fast response time: typically less than 1.0ps from 0 Volts to VBR min High Temperature soldering: 260°C/40 seconds at terminals Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT Plastic package has Underwriters Laboratory Flammability 94V-0 Matte tin lead–free Plated Halogen free and RoHS compliant Typical failure mode is short from over-specified voltage or current Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4) Maximum Ratings Functional Diagram Bi-directional Cathode Anode Uni-direction Applications TVS/ESD devices are ideal for the protection of low speed I/O interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. (TA=25℃ unless otherwise noted) Parameter Symbol Value Unit PPPM 200 Watts PPPM 1000 Watts IPP See Next Table Amps PM(AV) 0.4 Watt Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) IFSM 20 Amps Maximum Instantaneous Forward Voltage at 25A for Unidirectional Only (Note 4) VF 3.5 Voltage TJ , TSTG -55 to +150 °C Peak Pulse Power Dissipation with a 10/1000µs waveform (Note 1), (Note 2) Peak Pulse Power Dissipation with a 8/20µs waveform Peak Pulse Current with a 10/1000µs waveform.(Note1,Fig.3) Power Dissipation on Infinite Heat Sink at TL=75°C Operating junction and Storage Temperature Range. Notes: 1. Non-repetitive current pulse, per Fig. 3 and derated above T A = 25°C per Fig. 2. 2. Mounted on 5.0mm x 5.0mm (0.03mm thick) Copper Pads to each terminal. 3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minutes maximum. 4. VF < 3.5V for VBR < 200V and VF< 6.5V for VBR > 201V. SOCAY Electronics Co., Ltd. Revision September 25, 2013 www.socay.com 1/6 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Transient Voltage Suppressors for ESD Protection SOD123 Series TVS/ESD Electrical Characteristics (TA=25°C unless otherwise noted) Device Marking Part Number Uni Bi Uni Bi ESD3.3V12D-A ESD5.0V12D-A ESD6.0V12D-A ESD6.5V12D-A ESD7.0V12D-A ESD7.5V12D-A ESD8.0V12D-A ESD8.5V12D-A ESD9.0V12D-A ESD10V12D-A ESD11V12D-A ESD12V12D-A ESD13V12D-A ESD14V12D-A ESD15V12D-A ESD16V12D-A ESD17V12D-A ESD18V12D-A ESD19V12D-A ESD20V12D-A ESD22V12D-A ESD24V12D-A ESD26V12D-A ESD28V12D-A ESD30V12D-A ESD33V12D-A ESD36V12D-A ESD40V12D-A ESD43V12D-A ESD45V12D-A ESD48V12D-A ESD51V12D-A ESD54V12D-A ESD58V12D-A ESD60V12D-A ESD64V12D-A ESD70V12D-A ESD75V12D-A ESD78V12D-A ESD80V12D-A ESD85V12D-A ESD90V12D-A ESD96V12D-A ESD110V12D-A ESD120V12D-A ESD130V12D-A ESD140V12D-A ESD150V12D-A ESD160V12D-A ESD170V12D-A ESD180V12D-A ESD190V12D-A ESD3.3V12D-C ESD5.0V12D-C ESD6.0V12D-C ESD6.5V12D-C ESD7.0V12D-C ESD7.5V12D-C ESD8.0V12D-C ESD8.5V12D-C ESD9.0V12D-C ESD10V12D-C ESD11V12D-C ESD12V12D-C ESD13V12D-C ESD14V12D-C ESD15V12D-C ESD16V12D-C ESD17V12D-C ESD18V12D-C ESD19V12D-C ESD20V12D-C ESD22V12D-C ESD24V12D-C ESD26V12D-C ESD28V12D-C ESD30V12D-C ESD33V12D-C ESD36V12D-C ESD40V12D-C ESD43V12D-C ESD45V12D-C ESD48V12D-C ESD51V12D-C ESD54V12D-C ESD58V12D-C ESD60V12D-C ESD64V12D-C ESD70V12D-C ESD75V12D-C ESD78V12D-C ESD80V12D-C ESD85V12D-C ESD90V12D-C ESD96V12D-C ESD110V12D-C ESD120V12D-C ESD130V12D-C ESD140V12D-C ESD150V12D-C ESD160V12D-C ESD170V12D-C ESD180V12D-C ESD190V12D-C FD FE FG FK FM FP FR FT FV FX FZ HE HG HK HM HP HR HT HB HV HX HZ JE JG JK JM JP JR JT JV JX JZ XE XG XK XM XP XR XT XB XV XX XZ TE TG TK TB TM TP TR TT TV KE KG KK KM KP KR KT KV KX KZ LE LG LK LM LP LR LT LB LV LX LZ ME MG MK MM MP MR MT MV MX MZ NE NG NK NM NP NR NT NB NV NX NZ PE PG PK PB PM PP PR PT PV VRWM (V) (Max.) 3.3 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 48.0 51.0 54.0 58.0 60.0 64.0 70.0 75.0 78.0 80.0 85.0 90.0 96.0 110.0 120.0 130.0 140.0 150.0 160.0 170.0 180.0 190.0 Breakdown Voltage VBR (V) @IT Min Max 5.20 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.00 11.10 12.20 13.30 14.40 15.60 16.70 17.80 18.90 20.00 21.10 22.20 24.40 26.70 28.90 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.70 60.00 64.40 66.70 71.10 77.80 83.30 86.70 88.80 94.40 100.00 111.00 122.00 133.00 144.00 155.00 167.00 178.00 189.00 200.00 211.00 6.00 7.00 7.37 7.98 8.60 9.21 9.83 10.40 11.10 12.30 13.50 14.70 15.90 17.20 18.50 19.70 20.90 22.10 23.30 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 49.10 52.80 55.30 58.90 62.70 66.30 71.20 73.70 78.60 86.00 92.10 95.80 97.60 104.00 111.00 123.00 135.00 147.00 159.00 171.00 185.00 197.00 209.00 220.00 232.00 IT VC (mA) 10 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 IR Max @IPP 8.0 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 30.6 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 129.0 137.0 146.0 162.0 177.0 193.0 209.0 224.0 243.0 259.0 275.0 292.0 308.0 25.0 21.74 19.42 17.86 16.67 15.50 14.71 13.89 12.99 11.76 10.99 10.05 9.30 8.62 8.20 7.69 7.25 6.85 6.54 6.17 5.63 5.14 4.75 4.41 4.13 3.75 3.44 3.10 2.88 2.75 2.58 2.43 2.30 2.14 2.07 1.94 1.77 1.65 1.59 1.55 1.46 1.37 1.23 1.13 1.04 0.96 0.89 0.82 0.77 0.73 0.69 0.69 400 400 400 250 100 50 25 10 5 2.5 2.5 2.5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Note: 1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts and under, the I R limit is double SOCAY Electronics Co., Ltd. Revision September 25, 2013 www.socay.com 2/6 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Transient Voltage Suppressors for ESD Protection SOD123 Series TVS/ESD Ratings and Characteristic Curves (TA=25°C unless otherwise noted) Fig1 – 10/1000 μs Pulse Waveform Fig2 - ESD Pulse Waveform (according to IEC 61000-4-2) Peak Value IPPM TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM Pulse tr=10µsec Peak 100 Half Value IPPM (IPPM/2) 50 10/1000µsec. Waveform as defined by R.E.A 10% 1.0 2.0 t - Time (ms) 3.0 Time (ns) tr = 0.7~1ns 30ns 60ns tc 0 0 4.0 Fig3 - Pulse Derating Curve Fig4 - Typical Junction Capacitance 100000 100 CJ – Junction Capacitance (pF) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % 100% 90% Percent of Current % IPPM - Peak Pulse Current, % IRSM 150 80 60 40 20 Bi-directional @zero bins 10000 Uni-directional @zero bins 1000 Uni-directional @VRWM 100 10 Tj=25°C f=1.0MHz Vsig=50mVp-p Bi-directional @VRWM 1 0 0 25 50 75 100 125 TA-Ambient temperature(°C) 150 1.0 175 Fig5 - ESD Clamping (+8KV Contac per IEC61000-4-2) 1000.0 Fig6 - ESD Clamping (-8KV Contac per IEC61000-4-2) SOCAY Electronics Co., Ltd. Revision September 25, 2013 10.0 100.0 VBR-Reverse Breakdown Voltage (V) www.socay.com 3/6 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Transient Voltage Suppressors for ESD Protection SOD123 Series TVS/ESD Fig7 I-V Curve Characteristics Uni-directional Bi-directional I I IPP IF VC VC V VBR VRW R VF IT IT VBR VRW R IT SOD-123 Molded Plastic over glass passivated junction Color band denotes cathode except Bipolar Matte Tin-plated leads, Solderable per JESD22-B102D Terminal VRW VBR VC R Environmental Specifications Physical Specifications Polarity IR IPP IPP Case V IR Temperature Cycle JESD22-A104 Pressure Cooker JESD22-A102 High Temp. Storage JESD22-A103 HTRB JESD22-A108 Thermal Shock JESD22-A106 Soldering Parameters Reflow Condition Lead–free assembly TP Ramp-up Critical Zone TL to TP Temperature TL TS(max) Pre Heat -Temperature Min (Ts(min)) 150°C -Temperature Max (Ts(max)) 200°C - Time (min to max) (Ts) 60 -180 Seconds Ramp-down TS(min) Preheat 25 Time to peak temperature (t 25℃ to peak) Average ramp up rate ( Liquidus Temp TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max - Temperature (TL) (Liquidus) 217°C - Time (min to max) (TL) 60 -150 Seconds Reflow Time Peak Temperature (TP) Time within 5°C Temperature (tp) SOCAY Electronics Co., Ltd. Revision September 25, 2013 260 +0/-5°C of actual peak 20 -40 Seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max Do not exceed 280°C www.socay.com 4/6 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Transient Voltage Suppressors for ESD Protection SOD123 Series TVS/ESD Dimensions Inches SOD-123 Millimeters Dimensions Min Max Min Max A 0.031 0.044 0.77 1.09 B 0.1 0.112 2.51 2.81 C 0.055 0.071 1.38 1.78 D 0.140 0.152 3.51 3.82 E 0.037 0.053 0.93 1.33 F 0.01 - 0.25 - G - 0.008 - 0.20 Cathode Band Part Numbering Part Marking ESD12D×× V-A Uni-directional VRwm Marking Code Cathode Band SOD-123 ESD SERIES Packaging Part Number Component Package Quantity Packaging Option Packaging Specification ESD12DXXV-A/C SOD-123 3000 Tape & Reel -12mm/7″tape EIA STD RS-481 SOCAY Electronics Co., Ltd. Revision September 25, 2013 www.socay.com 5/6 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Transient Voltage Suppressors for ESD Protection SOD123 Series TVS/ESD Tape and Reel Specifications 7.0 (177.8) 0.157 (4.0) 0.059 Diameter (1.5) 0.472 (12.0) 0.36 (9.2) 0.512(13.0) Arbor Hole Diameter 0.157 (4.0) Cover tape 0.49 (12.4) Direction of Feed Dimensions are in inches (and millimeters) SOCAY Electronics Co., Ltd. Revision September 25, 2013 www.socay.com 6/6 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information.