Non-reflective Terminations (BNC) BNC-TM Series ■Features 1.High Performance These wide bandwidth/ultra high matching nonreflective termination use Hirose Electric original high frequency matching technology. BNC-TMP-05(03) BNC-TMP-05-1(01) BNC-TMJ-05(02) BNC-TMJ-05-1(01) BNC-TMP-05-2(02) BNC-TMP-05-3(01) BNC-TMJ-05-2(02) BNC-TMJ-05-3(01) 2.Full Assortment of 50 ohms and 75 ohms Types In addition to the 50 ohms impedance type, plugs and jacks are available in a 75 ohms type. BNC-TMP-05(75) BNC-TMJ-05(75) BNC-TMP-1 ■Product Specifications Frequency range (Note) Characteristic impedance Maximum Input Power (Note) Ratings DC to 3.0 GHz 50 ohms, 75 ohms 0.5 to 1 W Operating temperature range -10ç to +65ç Operating relative humidity 95% Max. Note: The frequency range and the maximum input power will differ depending on the products. Item Standard Conditions 1.Vibration No electrical discontinuity of 1 µs or more No damage, cracks, or parts dislocation 2.Shock 3.Temperature cycle No electrical discontinuity of 1 µs or more Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm, acceleration of 98 m/s2 for 2 hours in each of 3 directions Acceleration of 490 m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis Temperature: -55ç → +5ç to +35ç → +85ç → +5ç to +35ç Time: 30 → 15 max. → 30 → 15 max. (Minutes) 200 cycles ●The test method conforms to MIL-STD-202. ■Materials ■Ordering Information Part Material Finish Connector Body Brass Nickel plating Insulator PTFE ---------- Male contacts Brass Gold plating Female contacts Beryllium copper Gold plating Resistor Metal film ---------- Cover PVC ---------- BNC - TM P - 05 - 1 1 2 3 4 5 1 Series Name: BNC Series 4 Power 2 TM:Indicates a non-reflective termination (Example) : 05: 0.5 W 3 Connector type P: Plug type J: Jack type 1:1W 5 Suffix 61 ■Specifications Frequency Range (GHz) V.S.W.R. (Max) Power (W) Impedance (Ohms) Direct Current Resistance Connectors Weight (g) DC~1 1~3 1.10 1.20 0.5 50 50±0.5 BNC-P 15 0.5 50 50±0.5 BNC-J 10 0.5 50 50±0.5 BNC-P 15 π1 BNC-TMJ-05-1(01) 0.5 50 50±0.5 BNC-J 10 π1 BNC-TMP-05-2(02) 0.5 50 50±0.5 BNC-P 16 π2 0.5 50 50±0.5 BNC-J 11 0.5 50 50±0.5 BNC-P 16 BNC-TMJ-05-3(01) 0.5 50 50±0.5 BNC-J 11 π2 π1 π2 π1 π2 BNC-TMP-05(75) 0.5 75 75±2.25 BNC-P(75) 14 0.5 75 75±2.25 BNC-J(75) 9 1 50 50±2 BNC-P 16 Part Number BNC-TMP-05(03) BNC-TMJ-05(02) BNC-TMP-05-1(01) BNC-TMJ-05-2(02) BNC-TMP-05-3(01) BNC-TMJ-05(75) BNC-TMP-1 DC~0.1 DC~1 1~3 DC~0.1 1.10 1.10 1.20 1.10 DC~0.5 0.5~2 1.15 1.20 DC~1 1~2 1.15 1.20 π1 Low-cost items with DC to 100 MHz bandwidth limit. π2 Cover fitting type ■Typical Data 62 ■External Dimensions Soldering Soldering Cover Cover Soldering πBNC-TMP/TMJ-05 Series have a 50 ohms or 75 ohms indication for each characteristic impedance. 63