Flex Series GWF410 10 Zone Expandable Conventional Fire Alarm Control Panel Description The Flex 410 is a ten zone fire alarm control panel (FACP) expandable to twenty or thirty zones using optional CZM400 zone expander module(s). The Flex 410 is ideal for a wide range of different sized installations such as hotels, schools, correctional institutions, health care facilities, small office buildings, and manufacturing plants. Initiating device circuits (IDCs) for the Flex 410 can be programmed as either ten Class B (Style B) or five Class A (Style D) circuits. This is expandable to either twenty Class B (ten Class A), or thirty Class B (fifteen Class A) IDC circuits. The panel is compatible with a variety of conventional two-wire smoke detectors, four-wire smoke detectors, and notification appliances. This includes System Sensor i3™ Series microprocessor-based detectors with advanced features like drift compensation, maintenance alert and freeze warning. (See Appendix A of the Flex 410 Installation & Operations Manual PN 151321 for a list of compatible devices.) Outputs include four Class B (Style Y) or two Class A (Style Z) supervised notification appliance circuits (NACs) to annunciate alarm conditions. NAC circuits support single circuit synchronization, regulated. Three programmable auxiliary relay outputs can be programmed to activate (for all zones or individual zones): pre-alarm, fire alarm, auxiliary alarm, alarm by zone and system or circuit troubles (e.g., loss of AC, low battery, communication failure, phone line trouble, fire drills, and NAC trouble). The Flex 410 includes a built-in digital alarm communicator (DACT) to report status to a central station. A user-friendly, two-line LCD display and tactile keypad makes system programming and control easy. The Flex 410 cabinet can be flush- or surface-mounted and a Plexiglas window/deadfront door kit is available where jurisdictions require. The fully regulated, efficient 6-amp power supply with charger ensures adequate power is available at all times. GWF410 Features • 10 Class B (Style B) or 5 Class A (Style D) initiating device circuits (IDCs), expandable up to 30 Class B or 15 Class A IDCs with optional zone expander(s) • Supervised zone expanders and I/O modules can be mounted remotely in optional accessory cabinet • All zones compatible with 2- and 4-wire detectors • Built-in digital alarm communication transmitter (DACT) with dual phone line monitors • 4 Class B (Style Y) or 2 Class A (Style Z) supervised notification appliance circuits (NACs) • Selectable/programmable NAC output patterns: - ADA compliant strobe synchronization - ANSI audible signals as required by NFPA 72 - Single Stroke BI - Constant output - California code - March code (continued next page) The Flex 410 fire alarm control panel is listed to UL® Standard 864, 9th Edition. An ISO 9000-2000 Company SIGNALING i 3™ is a trademark of Honeywell International Inc. UL® is a registered trademark of Underwriter’s Laboratories, Inc. Windows® is a registered trademark of Microsoft Corporation. S521 7165-1288:182 GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. www.gamewell-fci.com 9021-60294 Rev. A page 1 of 2 ©2007 by Honeywell International Inc. All rights reserved. Features (continued) Specifications • Built-in 2-line, 32-character LCD display with easy-toread English language readouts • 3 programmable general purpose relays • Built-in walk test • Programmable from keypad, remote annunciator, or using direct connect port for on-site downloading with SmartProgram 400 software (Windows®-based) • Programmable features to minimize false alarms: smoke verification, pre-alarm delay, cross-zoning, and enhanced verification • Municipal box service and polarity reversal signaling • Programmable date settings for Daylight Savings Time, and clock source setting options for 50 Hz, 60 Hz or internal clock AC Power 120 VAC, 60Hz, 3 A Battery Max. charging circuit: 27.4 VDC@ 0.75A Max. charger capacity: 33 Ah (two 18Ah batteries fit inside FACP) Options GWCZM-400 Each GWCZM-400 zone expander provides the control panel with ten additional Class B (Style B) zones or five Class A (Style D) zones. The GWCZM-400 connects to the control panel via the panel SBUS and is supervised and power limited. Up to two zone expanders can be used per panel. Mounts in FACP or into a GWCAB400-A accessory cabinet. GWIOM-410 This status display module provides outputs and control functions for remote annunciation of alarm, trouble, and supervisories for each zone. The system can supervise up to eight GWIOM-410 status display modules. Mounts in FACP or into a GWCAB400-A accessory cabinet. GWRAN-400 The GWRAN-400 remote annunciator can perform all system control operations. It also provides trouble and alarm information and can be used for programming. The FACP can support up to four GWRAN-400 remote annunciators. Mounts in dual gang electrical box. GWCAB400-A This accessory cabinet is used for mounting GWCZM-400 zone expander and/or GWIOM-410 status display module. GWPLEX-2GA This door option combines a dead-front panel with a clear bicarbonate window to limit access to the control panel. Used for jurisdictions where single button operation is required. Operating Power 24 VDC operating voltage Total DC Load 6A Initiating Device Circuits (IDC) (2-wire smoke): 17.5- 27.4 VDC Alarm current draw (panel): 460 mA Short circuit current: 95 mA maximum Standby current draw (panel): 140 mA Maximum impedance: 50 ohms Accessory Power Notification Circuits (NAC) 27.4 VDC, 1 A 27.4 VDC, 3 A max/output (6 A total) Maximum line impedance: 1.5 ohm Programmable Relays 2.5 A, 24 VDC (inductive), 5 A, 24 VDC (resistive), non-power limited Operating Range 32° F to 120° F (0° C to 49° C) Flex 410 Cabinet 26 3/8" x 17 3/16" x 4" (67 x 44 x 10 cm) (H x W x D) Accessory Cabinet 10 3/8" x 10 3/16" x 3" (26 x 26 x 8 cm) Ordering Information Part Number Description GWF410 Flex 410 FACP, 10 zones, expandable to 20 and 30 zones, 120 VAC Flex 410 Installation & Operation Manual GW151321 Options: GWCZM-400 GWIOM-410 GWRAN-400 GWCAB400-A GWPLEX-2GA SP400 Zone expander module; adds 10 Class B or 5 Class A circuits Input / output relay, supervisory status module Remote annunciator for Flex 410 Accessory cabinet for mounting GWCZM-400 or GWIOM-410 Dead-front door with Plexiglas window SmartProgram 400 for remote programming of the Flex 410 using a PC (available only to authorized distributors at ESD extranet) GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 9021-60294 Rev. A page 2 of 2 www.gamewell-fci.com