CC2595 www.ti.com SWRS090A – SEPTEMBER 2010 – REVISED MARCH 2011 2.4-GHz RF FRONT END Check for Samples: CC2595 FEATURES • 1 • • • Low Cost and Small Package Very Few External Components 2.0-V to 3.6-V Operation • • • Less Than 1-μA Current Consumption in Power Down Mode Low Transmit Current Consumption 98 mA at 3 V for +20.7 dBm Out (PAE = 40%) RoHS Compliant 3- x 3-mm QFN-16 Package DESCRIPTION CC2595 is a PA solution that extends the range of any Zigbee or Bluetooth transceiver. It is a cost-effective and high performance RF front end for low-power and low-voltage wireless applications in the 2.4-GHz band. Its single-ended RF input and output make it compatible with any manufacturer’s transceiver if appropriate external parts are used. When a transmit/receive (T/R) switch and a balun are used, it can interface with existing and future CC24XX and CC25XX transceiver products. CC2595 extends the link budget by providing a power amplifier for improved output power. It is highly effective for high (+20 dBm) output power making it suitable for battery-operated systems. CC2595 contains PA and RF-matching for simple design of high performance wireless applications. It is packaged in a 3- x 3-mm, 16-lead QFN package with exposed paddle. FUNCTIONAL BLOCK DIAGRAM AVDD_PA1 AVDD_PA2 RF_IN RF_OUT Bias and Logic RBIAS1 RBIAS2 AVDD_BIAS PA_EN 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2010–2011, Texas Instruments Incorporated CC2595 SWRS090A – SEPTEMBER 2010 – REVISED MARCH 2011 www.ti.com This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. GND 1 RF_IN 2 GND AVDD_PA1 GND GND PIN ASSIGNMENTS 16 15 14 13 12 RF_OUT 11 GND 10 RF_OUT 3 x 3 QFN - 16 9 5 6 7 8 PAEN 4 RBIAS2 GND RBIAS1 3 AVDD_BIAS GND GND Figure 1. CC2595 Pinout Table 1. Pin Descriptions for CC2595 2 PIN NO. PIN NAME TYPE 1 GND GND 2 RF_IN RF in/out 3 GND GND DESCRIPTION RF single-ended input 4 GND GND 5 AVDD_BIAS Power Supply voltage, analog and logic 6 RBIAS1 Analog Bias set resistor, stage 1 7 RBIAS2 Analog Bias set resistor, stage 2 8 PAEN Digital in 9 GND GND 10 RF_OUT RF in/out 11 GND GND 12 RF_OUT RF in/out 13 GND GND 14 GND GND 15 AVDD_PA1 Power 16 GND GND Chip enable: high = PA on RF single-ended output (1 of 2) RF single-ended output (2 of 2) Supply voltage, PA stage 1 Submit Documentation Feedback Copyright © 2010–2011, Texas Instruments Incorporated Product Folder Links: CC2595 CC2595 www.ti.com SWRS090A – SEPTEMBER 2010 – REVISED MARCH 2011 Table 2. ORDERING INFORMATION (1) (1) (2) TA PACKAGE (2) ORDERABLE PART NUMBER TOP-SIDE MARKING –40ºC to 85ºC RGT (QFN) CC2595RGTR C2595 For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com. Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. ABSOLUTE MAXIMUM RATINGS (1) Over operating free-air temperature range (unless otherwise noted). Supply voltage range Voltage on any digital pin VALUE UNIT -0.3 to 3.6 V -0.3 to VDD + 0.3, max 3.6 V +10 dBm RF input power RF_IN TSTG Storage temperature range –50 to 150 °C TJ Junction temperature 150 °C RF pins 1500 ESD (1) Excluding RF pins HBM (Human Body Model) V 2000 Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. RECOMMENDED OPERATING CONDITIONS over operating free-air temperature range (unless otherwise noted) MIN Operating supply voltage TA Operating free air temperature range NOM MAX UNIT 2 3.6 V –40 85 °C MAX UNIT ELECTRICAL CHARACTERISTICS TJ = 25°C, VDD = 3 V (unless otherwise specified) PARAMETER TEST CONDITIONS Current consumption No input signal Power down current EN = LOW MIN 30 High input level (control pin) 1.3 Low input level (control pin) Power down → Transmit TYP Time from EN goes HIGH to settled in TX mA 1 µA VDD V 0.3 V 1 µs Submit Documentation Feedback Copyright © 2010–2011, Texas Instruments Incorporated Product Folder Links: CC2595 3 CC2595 SWRS090A – SEPTEMBER 2010 – REVISED MARCH 2011 www.ti.com RF CHARACTERISTICS TJ = 25°C, VDD = 3 V (unless otherwise specified) PARAMETER TEST CONDITIONS f Frequency range of operation POUT Output power Pin = 0 dBm PAE Power added efficiency Pin = 0 dBm POUTHI Output power (high) VDD = 3.3 V, Pin = +3 dBm PAEHI Power added efficiency (high) VDD = 3.3 V, Pin = +3 dBm P1dB Output 1-dB compression point IRL Input return loss ORL Output return loss +22 8 Output power variation over supply voltage 2 V to 3.6 V Output power variation over temperature -40°C to 85°C The harmonics can be further reduced by using an external LC filter and antenna. Stability Load mismatch MAX UNIT 2483.5 MHz +20.7 dBm 40 2400 MHz to 2483.5 MHz 2nd harmonic 4 +20 Output power variation over frequency 3rd harmonic TYP 2400 10 Harmonics K MIN +22.5 % dBm 45 % +17 dBm 15 dB 10 dB 0.5 dB 4 dB 1 dB Compliant with international regulatory standards Compliant with international regulatory standards Unconditionally stable No damage at 10:1 VSWR condition; all phases Submit Documentation Feedback Copyright © 2010–2011, Texas Instruments Incorporated Product Folder Links: CC2595 CC2595 www.ti.com SWRS090A – SEPTEMBER 2010 – REVISED MARCH 2011 TYPICAL CHARACTERISTICS PA Output Power, PAE, Current Consumption and Gain vs Input Power (3-V Supply) 60 120 50 100 PA Output Power vs Supply, 0-dBm Input 22 21 40 80 20 60 Gain 19.5 40 I_supply 19 POUT 10 0 -25 20 18.5 18 0 -20 20 -15 -10 PIN - dBm -5 0 5 2 2.2 2.4 2.6 Noise Figure and Gain vs Frequency (3-V Supply) 30 7 28 25 22 Gain 5 24 4 22 POUT - dBm 26 6 3.6 49.0% P OUT (3.3 V) 48.0% 47.0% POUT (3 V) 21 46.0% 20 PAE (3.3 V) 19 18 43.0% PAE (3 V) 20 Noise Figure 16 2 2.44 2.46 2.48 f- Frequency - GHz 2.5 18 2.52 15 2.38 Figure 4. 45.0% 44.0% 17 2.42 3.4 50.0% 23 Gain - dB Noise Figure - dB 24 2.4 3.2 POUT and PAE vs Frequency (3-V Supply, 0-dBm Input and 3.3-V Supply, +3-dBm Input) 8 2.38 3 VSUPPLY - V Figure 3. Figure 2. 3 2.8 PAE - % 30 20.5 Gain - dB PAE Current - mA PAE - %, POUT - dBm, Gain - dB 21.5 42.0% 41.0% 2.4 2.42 2.44 2.46 2.48 f - Frequency - GHz 2.5 40.0% 2.52 Figure 5. Submit Documentation Feedback Copyright © 2010–2011, Texas Instruments Incorporated Product Folder Links: CC2595 5 CC2595 SWRS090A – SEPTEMBER 2010 – REVISED MARCH 2011 www.ti.com TYPICAL CHARACTERISTICS (continued) POUT and PAE vs Frequency (Three Temperatures and 3-V Supply, 0-dBm Input) 23 POUT (-40°C) POUT (27°C) 21 Pout - dBm 20 47.0% 46.0% POUT (85°C) 19 45.0% PAE (-40°C) 44.0% 43.0% 18 PAE (27°C) 17 42.0% 16 41.0% PAE (85°C) 15 14 13 2.38 2.4 PAE - % 22 48.0% 40.0% 39.0% 2.42 2.44 2.46 2.48 2.5 Frequency - GHz 38.0% 2.52 Figure 6. 6 Submit Documentation Feedback Copyright © 2010–2011, Texas Instruments Incorporated Product Folder Links: CC2595 PACKAGE OPTION ADDENDUM www.ti.com 14-Mar-2014 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) CC2595RGTR ACTIVE QFN RGT 16 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 85 C2595 CC2595RGTT ACTIVE QFN RGT 16 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 85 C2595 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 14-Mar-2014 In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 13-Mar-2014 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant CC2595RGTR QFN RGT 16 3000 330.0 12.4 3.3 3.3 1.1 8.0 12.0 Q2 CC2595RGTT QFN RGT 16 250 180.0 12.4 3.3 3.3 1.1 8.0 12.0 Q2 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 13-Mar-2014 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) CC2595RGTR QFN RGT 16 3000 338.1 338.1 20.6 CC2595RGTT QFN RGT 16 250 210.0 185.0 35.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2015, Texas Instruments Incorporated