ELECTRIC DOUBLE LAYER CAPACITORS "EVerCAP " JL Screw Terminal Type, High Power Density Type series JL High power density. Rapid charge-discharge. Suitable for regeneretion and UPS applications. Adapted to the RoHS directive (2002/95/EC). High Power Density JC Specifications Item Performance Characteristics Category Temperature Range – 25 to + 60°C Rated Voltage Range 2.5V Rated Capacitance Range 400 to 2600F Capacitance Tolerance ± 20% (20°C) Leakage Current 0.5C (mA) [C : Rated Capacitance (F)] (After 30 minutes' application of rated voltage. 2.5V) Stability at Low Temperature Capacitance ( – 25°C) / Capacitance ( +20°C) ×100 DCR* Refer to the list below. (20°C) Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 60°C. Capacitance change Shelf Life The specifications listed at right shall be met when the capacitors are restored to 20°C after storing the capacitors under no load for 2000 hours at 60°C. Marking Printed with white color letter on black sleeve. See Note 70% DCR (–25°C) / DCR (+20°C) 7 *DC internal resistance DCR Within ±30% of initial value 300% or less of initial specified value Leakage current Less than or equal to the initial specified value Capacitance change DCR Within ±30% of initial value 300% or less of initial specified value Leakage current Less than or equal to the initial specified value Type numbering system (Example : 2.5V 650F) Drawing 1 φ 35, φ 40 Hexagenal headed bolt Bottom plate M5(φ35) M6(φ40) Sleeve 2 3 4 5 6 7 8 S U B±1 θ˚ W±1 φ D+2MAX. + Mounting bracket (φ35, φ40) Code less 2-leg brackets BN No brackets T (φ51, φ63.5) Code less 3-leg brackets BB 2-leg brackets No bracket BN Configuration h H±0.5 MAX. P A ±1 r±1 Cr ( III ) Plating (RoHS compliant) SE φ 51 and larger Hexagenal headed bolt M6 Bottom plate 10 11 12 13 14 Case dia. code(φ35) Configuration φD Code Capacitance tolerance (±20%) C 35 Rated Capacitance (650F) D 40 Rated voltage (2.5V) F 51 Series name 63.5 G Type Pressure relief vent L+ 9 J J L 0 E 6 5 7 M S E C U S 0° 12 T Sleeve P W±1 D +2MAX. A±2 Pressure relief vent S P ±2 h H ±1 L+ A ±2 T Pressure relief vent U 30° ±1 MAX. Dimensions of mounting bracket Dimensions Rated Voltage ( Code ) Cap. ( F) Cap. code DCR (mΩ) 2.5V (0E) 400 550 650 700 850 1500 1600 2600 407 557 657 707 857 158 168 268 7 5 4 4 3 2 2 1.6 Case size φ D × L (mm) φ D L 085 35 105 135 105 40 135 135 51 150 63.5 150 Ref. Weight (g) 130 160 210 210 250 450 500 800 Dimensions of terminal pitch(W) and length(R) and Normal dia. of bolt (mm) φD 35 40 51 63.5 W 12.7 18.8 22.0 28.6 R 6 9 10 10 α 3 3 3 3 Nominal of bolt M5 M6 M6 M6 Leg shape Symbol P A B T S U θ° H h φD 3-Legs 51 32.5 38.5 63.5 38.1 43 – – 7.5 5.0 12 60 20 15 8.0 5.0 14 60 25 20 (mm) 2-Legs 35 24 29 45 7.0 3.5 10 30 15 10 40 27 32 48 7.0 3.5 10 45 17 12 51 33.2 40 63.5 40.5 46.5 – – 6.0 4.5 14 30 25 15 7.0 4.5 14 30 35 20 Note : The capacitance calculated from discharge time (∆T) with constant current ( i ) after 30minuite charge with rated voltage (2.5V). The discharge current ( i ) is 0.01 × F (rated capacitance). A discharge time (∆T) measured between 2V and 1V with constant current. The capacitance calculated bellow. Capacitance (F) = i × ∆T CAT.8100X