AZ954 SUBMINIATURE POWER RELAY FEATURES • • • • • • • • • Subminiature size for high density packaging Coil sensitivity to 114 mW Extremely low cost Coils to 24 VDC Epoxy sealed versions available 2 Amp contacts Class B insulation standard Life expectancy to 10 million operations UL, CUR file E43203 CONTACTS Arrangement SPDT (1 Form C) Ratings Resistive load: Max. switched power: 30 W or 250 VA Max. switched current: 2 A Max. switched voltage: 150 VDC* or 300 VAC UL Rating: 2 A at 125 VAC General Use 1 A at 240 VAC General Use 1 A at 30 VDC Resistive Material Silver nickel, gold plated Resistance < 100 milliohms initially GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 2 A 120 VAC Res. Operate Time (typical) 5 ms at nominal coil voltage Release Time (typical) 1 ms at nominal coil voltage (with no coil suppressions) Dielectric Strength 1250 Vrms coil to contact (at sea level for 1 min.) 750 Vrms between open contacts Insulation Resistance 100 megohms min. at 20°C, 500 VDC Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage 0.45W: -25°C (-13°F) to 75°C (167°F) 0.36W: -25°C (-13°F) to 85°C (185°F) 0.2W: -25°C (-13°F) to 95°C (203°F) COIL Power At Pickup Voltage (typical) Max Continuous Dissipation Temperature Rise Max. Temperature Storage -25°C (-13°F) to 130°C (266°F) 0.45 W coil: 253 mW 0.36 W coil: 203 mW 0.2 W coil: 114 mW Vibration 0.062" DA at 10–55Hz Shock 15 g 1.0 W at 20°C (68°F) ambient Enclosure P.B.T. polyester At nominal coil voltage: 0.45W: 54°C (97°F) 0.36W: 44°C (79°F) 0.2W: 30°C (54°F) Terminals Tinned copper alloy Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 3.5 grams 130°C (266°F) NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Other coil resistances and sensitivities available upon request. 4. Specifications subject to change without notice. 5/16/05W AZ954 RELAY ORDERING DATA 0.45 W COIL COIL SPECIFICATIONS Nominal Coil VDC 3 Max. Continuous VDC 4.5 Coil Resistance ±10% 20 Must Operate VDC 2.25 ORDER NUMBER* AZ954X–1C–3D AZ954Y–1C–3D 5 7.5 56 3.75 AZ954X–1C–5D AZ954Y–1C–5D 6 8.9 80 4.50 AZ954X–1C–6D AZ954Y–1C–6D 9 13.4 180 6.75 AZ954X–1C–9D AZ954Y–1C–9D 12 17.8 320 9.0 AZ954X–1C–12D AZ954Y–1C–12D 24 35.7 1280 18.0 AZ954X–1C–24D AZ954Y–1C–24D 0.36 W COIL COIL SPECIFICATIONS Nominal Coil VDC 3 Max. Continuous VDC 5.0 5 Coil Resistance ±10% 25 8.4 ORDER NUMBER* Must Operate VDC 2.25 AZ954X–1C–3DM 70 3.75 AZ954X–1C–5DM AZ954Y–1C–5DM AZ954Y–1C–3DM 6 10 100 4.50 AZ954X–1C–6DM AZ954Y–1C–6DM 9 15 225 6.75 AZ954X–1C–9DM AZ954Y–1C–9DM 12 20 400 9.0 AZ954X–1C–12DM AZ954Y–1C–12DM 24 40 1600 18.0 AZ954X–1C–24DM AZ954Y–1C–24DM 0.2 W COIL COIL SPECIFICATIONS Nominal Coil VDC 3 Max. Continuous VDC 6.7 Coil Resistance ±10% 45 ORDER NUMBER* Must Operate VDC 2.25 AZ954X–1C–3DS AZ954Y–1C–3DS AZ954Y–1C–5DS 5 11 120 3.75 AZ954X–1C–5DS 6 13.4 180 4.50 AZ954X–1C–6DS AZ954Y–1C–6DS 9 20 400 6.75 AZ954X–1C–9DS AZ954Y–1C–9DS 12 26.5 700 9.0 AZ954X–1C–12DS AZ954Y–1C–12DS 24 59.9 2800 18.0 AZ954X–1C–24DS AZ954Y–1C–24DS * Add suffix “E” for epoxy sealed version. MECHANICAL DATA .620 [15.75] AZ954X PC BOARD LAYOUT .423 [10.75] .400 [10.16] .465 [11.81] 5x ø.039±.005 [ø1.0] .060 [1.52] .060 [1.52] .100 [2.54] .125 [3.18] AZ954X WIRING DIAGRAM 1 .300 [7.62] .300 [7.62] .100 [2.54] VIEWED TOWARD TERMINALS AZ954Y PC BOARD LAYOUT AZ954Y WIRING DIAGRAM 1 2 .062 [1.56] .400 [10.16] 2 .062 [1.56] 6 6x ø.039±.005 [ø1.0] 7 7 12 11 VIEWED TOWARD TERMINALS .300 [7.62] 12 11 VIEWED TOWARD TERMINALS .060 [1.52] .100 [2.54] VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010" 5/16/05W