2U Rackmount Chassis for ATX Motherboard with 4 Hot-Swap SAS/SATA HDD Trays and RPS HPC-7242 Features NEW Supports ATX motherboard with dual processors Four shock-resistant hot-swap disk trays supporting 3.5" or 2.5" SAS/SATA drives for RAID 5/10 application, one slim ODD, and two 2.5" internal drives Dual front USB 3.0 ports Supports 80plus single or redundant power supply up to 700W Front-accessible system fan without opening top cover for easy maintenance LED indicators and audible alarm notification for system fault detection Built-in Intelligent System Module enabling whole system fan control and remote manageability RoHS COMPLIANT 2002/95/EC Specifications Drive Bay Cooling Front I/O Interface Miscellaneous Intelligent System Module Remote Monitoring Environment Physical Characteristics External Internal Slim Optical Drive 1 2.5" 2 Hot Swap 4 SAS/SATA HDDs Fan 1 (8 cm/47CFM) + 2 (6 cm/28CFM) for SAS/SATA storage unit Air Filter Yes USB 3.0* 2 LED Indicators Power, HDD, temperature, fan, LAN1, and LAN2 Rear Panel Two 9-pin D-Sub CPU/System fan speed, CPU/System temperature, motherboard voltage (Only selected Advantech MBs/CPU cards with SUSIAccess installed can fully enabled these functions, check with Advantech local rep. for detailed information.) Operating Non-Operating Temperature 0 ~ 40° C (32 ~ 104° F) -40 ~ 70° C (-40 ~ 156° F) Humidity 10 ~ 95% @ 40° C, non-condensing 10 ~ 95% @ 60° C, non-condensing Vibration (5 ~ 500 Hz) 1 Grms 2G Shock 10 G (with 11 ms duration, half sine wave) Dimensions (W x H x D) 482 x 88 x 525 mm (19" x 3.46" x 20.67") Weight 13.7 kg (30.12 lb) * The USB ports do not operate if a main board without on-board USB 3.0 internal box header is installed. Front view Switch/buttons USB 3.0 x2 LED indicators Slim optical drive bay Front-accessible fan without opening top cover Hot-swap HDD tray x4 Rear view Thumb screws Single or redundant PSU supported Top view Supports ATX form factor motherboard Easy-to-maintain storage fan kit with thumb screw Rear I/O bracket for low profile add-on cards Internal 2.5" x2 drive bays Intelligent System Module Case open switch *Note: Motherboard and power supply are not included. Server-grade IPCs All product specifications are subject to change without notice Last updated : 29-May-2015 HPC-7242 Dimensions Unit: mm [inch] 426.4 [16.79] 523.8 [20.62] 566.3 [22.30] 44.4 [1.75] 76.2 [3.00] 88.4 [3.48] 61.1 92 [2.41] [3.62] 92 [3.62] 92 [3.62] 92 [3.62] 42.1 [1.66] 464.5 [18.29] 482 [18.98] Ordering Information Part Number HPC-7242MB-00XE Optional Accessories Description Without PSU, with ATX switch Part Number 9662132020E 1990021407T000 Power Supply Options Part Number 80 Plus Grade Wattage Type PS8-350FATX-XE Bronze 350W Single PS8-500U2-XE Bronze 500W RPS8-500U2-XE Bronze 500W RPS8-700U2-XE Bronze 700W Single (1+1) Redundant (1+1) Redundant Description Black mobile HDD tray Door filter Spare Parts Input AC 100 ~ 240 V (full range) AC 100 ~ 240 V (full range) AC 100 ~ 240 V (full range) AC 100 ~ 240 V (full range) Part Number Description 96CB-SATAPOWER-6P1 SATA power wire 6-pin to big 4-pin (for slim ODD) 1950014302N001 Special bracket for riser card AIMB-RP3P8-12A1E Rear I/O panel kit for low-profile add-on cards 1939000361 Screw (should purchase 7 pcs) 1960034816N000 I/O bracket (should purchase 7 pcs) 1960019475T201 Rear panel for low-profile Online Download www.advantech.com/products