HMHAA280, HMHA2801 Series, HMHA281 Half Pitch Mini-Flat Package 4-Pin Optocouplers Features Description ■ Compact 4-pin package (2.4mm maximum standoff The HMHA281, HMHA2801 Series consists of a gallium arsenide infrared emitting diode driving a silicon phototransistor in a compact 4-pin mini-flat package. The lead pitch is 1.27mm. ■ ■ ■ ■ ■ height) Half pitch leads for optimum board space savings Current Transfer Ratio in selected groups HMHA2801: 80–600% HMHA2801A: 80–160% HMHA2801B: 50–150% HMHA2801C: 50–100% HMHA281: 50–600% HMHAA280: 50–600% Available in tape and reel quantities of 500 and 2500 Applicable to Infrared Ray reflow (230°C Max, 30 seconds) BSI (File #8611/8612), CSA (File #1201524), UL (File #E90700) and VDE (File #136480) certified The HMHAA280 series consists of two gallium arsenide infrared emitting diodes, connected in inverse parallel, driving a single silicon phototransistor in a compact 4-pin mini-flat package. The lead pitch is 1.27mm. Applications HMHAA280 ■ AC line monitor ■ Unknown polarity DC sensor ■ Telephone line receiver HMHA281, HMHA2801 Series ■ Digital logic inputs ■ Microprocessor inputs ■ Power supply monitor ■ Twisted pair line receiver ■ Telephone line receiver Package Dimensions PIN 1 1 4 COLLECTOR 2 3 EMITTER 0.050 (1.27) 0.020 (0.51) 0.012 (0.30) 0.287 (7.29) 0.248 (6.30) 0.094 (2.39) 0.079 (2.01) 0.035 (0.89) 0.012 (0.30) Equivalent Circuit (HMHAA280) 0.106 (2.69) 0.091 (2.31) 0.173 (4.40) TYP ANODE 1 0.008 (0.20) 0.000 (0.0) CATHODE 2 0.030 (0.75) 0.022 (0.55) ©2006 Fairchild Semiconductor Corporation 3 EMITTER Equivalent Circuit (HMHA281, HMHA2801) Note: All dimensions are in inches (millimeters) HMHAA280, HMHA2801 Series, HMHA281 Rev. 1.0.1 4 COLLECTOR 1 www.fairchildsemi.com HMHAA280, HMHA2801 Series, HMHA281 Half Pitch Mini-Flat Package 4-Pin Optocouplers April 2006 Symbol Parameter Value Units TOTAL PACKAGE TSTG Storage Temperature -55 to +125 °C TOPR Operating Temperature -55 to +100 °C EMITTER IF (avg) Continuous Forward Current 50 mA IF (pk) Peak Forward Current (1µs pulse, 300pps.) 1 A VR Reverse Input Voltage (HMHA) 6 V PD Power Dissipation 60 mW 0.6 mW/°C Continuous Collector Current 50 mA Power Dissipation 150 mW 1.5 mW/°C Derate linearly (above 25°C) DETECTOR PD Derate linearly (above 25°C) VCEO Collector-Emitter Voltage 80 V VECO Emitter-Collector Voltage 7 V Electrical Characteristics (TA = 25°C) Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit 1.0 1.3 V 1.0 1.3 INDIVIDUAL COMPONENT CHARACTERISTICS Emitter VF Forward Voltage IF = 10mA HMHA281 HMHA2801 HMHA2801A HMHA2801B IR IF = 20mA HMHA2801C 1.4 IF = ±5mA HMHAA280 1.4 5 Reverse Current VR = 5V All BVCEO Breakdown Voltage Collector to Emitter IC = 0.5mA, IF = 0 All 80 BVECO Emitter to Collector IE = 100µA, IF = 0 All 7 ICEO Collector Dark Current VCE = 80V, IF = 0 All CCE Capacitance VCE = 0V, f = 1MHz All µA Detector 2 HMHAA280, HMHA2801 Series, HMHA281 Rev. 1.0.1 V 100 10 nA pF www.fairchildsemi.com HMHAA280, HMHA2801 Series, HMHA281 Half Pitch Mini-Flat Package 4-Pin Optocouplers Absolute Maximum Ratings (TA = 25°C unless otherwise specified) Symbol Characteristic Test Conditions Device Min. Typ.* Max. Unit % TRANSFER CHARACTERISTICS CTR DC Current Transfer Ratio IF = ±5mA, VCE = 5V HMHAA280 50 600 HMHA281 50 600 HMHA2801 80 600 HMHA2801A 80 160 HMHA2801B 50 150 HMHA2801C 50 100 IF = ± 5mA, VCE = 5V HMHAA280 0.33 3.0 IF = ± 8mA, IC = 2.4mA HMHAA280 0.4 HMHA281 0.4 IF = 5mA, VCE = 5V IF = 1mA, VCE = 5V CTR Symmetry VCE (SAT) Saturation Voltage IF = 8mA, IC = 2.4mA IF = 10mA, IC = 2mA HMHA2801 0.3 HMHA2801A 0.3 V HMHA2801B IF = 20mA, IC = 1mA) tr tf HMHA2801C Rise Time (Non-Saturated) IC = 2mA, VCE = 5V, RL = 100Ω All except for HMHA2801C IC = 2mA, VCE = 2V, RL = 1 KΩ HMHA2801C IC = 2mA, VCE = 5V, RL = 100Ω All except for HMHA2801C IC = 2mA, VCE = 2V, RL = 1KΩ HMHA2801C Fall Time (Non-Saturated) 0.2 3 µs 9 3 9 ISOLATION CHARACTERISTICS VISO Steady State Isolation Voltage 1 Minute All 2500 VRMS *All typicals at TA = 25°C 3 HMHAA280, HMHA2801 Series, HMHA281 Rev. 1.0.1 www.fairchildsemi.com HMHAA280, HMHA2801 Series, HMHA281 Half Pitch Mini-Flat Package 4-Pin Optocouplers Electrical Characteristics (TA = 25°C) (Continued) Fig. 1 Forward Current vs. Forward Voltage Fig. 2 Collector Current vs. Forward Current 100 100 VCE = 10 V IC - COLLECTOR CURRENT (mA) IF - FORWARD CURRENT (mA) TA = 25˚C 10 VCE = 5 V 10 VCE = 0.4 V 1 0.1 1 0.6 0.8 1.0 1.2 1.4 1 1.6 10 VF - FORWARD VOLTAGE (V) Fig. 3 Current Transfer Ratio vs. Forward Current Fig. 4 Normalized CTR vs. Temperature 2.0 1000 TA = 25˚C NORMALIZED CTR (IF) / CTR (5mA) IC /IF - CURRENT TRANSFER RATIO (%) 100 IF - FORWARD CURRENT (mA) VCE = 10 V VCE = 5 V 100 VCE = 0.4 V Normalized to: IF = 5 mA VCE = 5 V TA = 25˚C 1.5 IF = 5 mA 1.0 IF = 10 mA IF = 1 mA 0.5 IF = 0.5mA 0.0 -0.5 10 1 10 -40 100 -20 IF - FORWARD CURRENT (mA) 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE (˚C) Fig. 5 Collector Current vs. Temperature 100 IC - COLLECTOR CURRENT (mA) VCE = 5 V IF = 25 mA 10 IF = 10 mA IF = 5 mA IF = 1 mA 1 IF = 0.5 mA 0.1 -40 -20 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE (˚C) 4 HMHAA280, HMHA2801 Series, HMHA281 Rev. 1.0.1 www.fairchildsemi.com HMHAA280, HMHA2801 Series, HMHA281 Half Pitch Mini-Flat Package 4-Pin Optocouplers Typical Performance Characteristics Fig. 6 Collector Current vs. Collector-Emitter Voltage Fig. 7 Collector Current vs. Collector-Emitter Voltage 50 18 40 IC - COLLECTOR CURRENT (mA) IC - COLLECTOR CURRENT (mA) TA = 25˚C IF = 50 mA IF = 40 mA IF = 30 mA 30 IF = 20 mA IF = 10 mA 20 IF = 5.0 mA 10 16 IF = 50 mA IF = 40 mA 14 IF = 30 mA 12 IF = 20 mA 10 8 IF = 10 mA 6 IF = 5 mA 4 IF = 2 mA 2 IF = 0.5 mA IF = 1.0 mA 0 0 1 2 3 4 5 6 7 8 9 0 0.0 10 0.2 VCE - COLLECTOR-EMITTER VOLTAGE (V) 0.6 0.8 1.0 VCE - COLLECTOR-EMITTER VOLTAGE (V) Fig. 8 Collector Dark Current vs. Temperature Fig. 9 Switching Time vs. Load Resistance 1000 10 SWITCHING TIME (µs) ICEO - COLLECTOR DARK CURRENT (µA) 0.4 IF = 1.0 mA 1 VCE = 48 V VCE = 24 V 0.1 VCE = 10 V 0.01 TA = 25˚C IF = 16 mA VCC = 5 V tOFF 100 tS 10 1 VCE = 5 V tON 0.1 0.001 0 20 40 60 80 100 1 10 VCE(SAT) - COLLECTOR-EMITTER SATURATION VOLTAGE (V) TA - AMBIENT TEMPERATURE (˚C) 100 RL - LOAD RESISTANCE (KΩ) Fig. 10 Collector-Emitter Saturation Voltage vs. Temperature 0.30 IF = 5 mA IC = 1 mA 0.28 0.26 0.24 0.22 0.20 0.18 0.16 0.14 0.12 0.10 -40 -20 0 20 40 5 HMHAA280, HMHA2801 Series, HMHA281 Rev. 1.0.1 60 80 100 TA - AMBIENT TEMPERATURE (˚C) www.fairchildsemi.com HMHAA280, HMHA2801 Series, HMHA281 Half Pitch Mini-Flat Package 4-Pin Optocouplers Typical Performance Characteristics (Continued) Option Description V VDE Approved R1 Tape and Reel (500 units) R2 Tape and Reel (2500 units) R3 Tape and Reel (500 units; unit 180° rotated) R4 Tape and Reel (2500 units; unit 180° rotated) R1V Tape and Reel (500 units) and VDE Approved R2V Tape and Reel (2500 units) and VDE Approved R3V Tape and Reel (500 units; unit 180° rotated) and VDE Approved R4V Tape and Reel (2500 units; unit 180° rotated) and VDE Approved Marking Information 1 281 2 V X YY M1 6 3 4 5 Definitions 1 Fairchild logo 2 Device number 3 VDE mark (Note: Only appears on parts ordered with VDE option – See order entry table) 4 One digit year code 5 Two digit work week ranging from ‘01’ to ‘53’ 6 Assembly package code 6 HMHAA280, HMHA2801 Series, HMHA281 Rev. 1.0.1 www.fairchildsemi.com HMHAA280, HMHA2801 Series, HMHA281 Half Pitch Mini-Flat Package 4-Pin Optocouplers Ordering Information K0 P2 P0 t D0 E A0 W1 W B0 d F D1 P 1.27 Pitch Symbol Description Dimensions (mm) Tape Width W Tape Thickness t 0.30±0.20 Sprocket Hole Pitch P0 4.00±0.20 Sprocket Hole Dia. D0 1.55±0.20 Sprocket Hole Location E 1.75±0.20 Pocket Location F 5.50±0.20 P2 2.00±0.20 Pocket Pitch P 8.00±0.20 Pocket Dimension A0 4.40±0.20 Pocket Hole Dia. 12.00±0.4 B0 7.30±0.20 K0 2.30±0.20 D1 1.55±0.20 Cover Tape Width W1 9.20 Cover Tape Thickness d 0.065±0.02 Max. Component Rotation or Tilt Devices Per Reel Reel Diameter 20˚ max R1 500 R2 2500 R1 178 mm (7") R2 330 mm (13") 7 HMHAA280, HMHA2801 Series, HMHA281 Rev. 1.0.1 www.fairchildsemi.com HMHAA280, HMHA2801 Series, HMHA281 Half Pitch Mini-Flat Package 4-Pin Optocouplers Tape and Reel Dimensions 0.024 (0.61) 0.060 (1.52) 0.190 (4.83) 0.310 (7.87) 0.050 (1.27) Recommended Infrared Reflow Soldering Profile Package Surface Temperature T (°C) (heating) to 30 s 230°C (peak temperature) 210°C 180°C to 60 s 150 s 90 s 60 s Time (s) • Peak reflow temperature: 230°C (package surface temperature) for 30 seconds • Time of temperature higher than 210°C: 60 seconds or less • One time soldering reflow is recommended 8 HMHAA280, HMHA2801 Series, HMHA281 Rev. 1.0.1 www.fairchildsemi.com HMHAA280, HMHA2801 Series, HMHA281 Half Pitch Mini-Flat Package 4-Pin Optocouplers Footprint Drawing for PCB Layout The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FAST® FASTr™ ActiveArray™ FPS™ Bottomless™ FRFET™ Build it Now™ GlobalOptoisolator™ CoolFET™ GTO™ CROSSVOLT™ HiSeC™ DOME™ I2C™ EcoSPARK™ i-Lo™ E2CMOS™ ImpliedDisconnect™ EnSigna™ IntelliMAX™ FACT™ FACT Quiet Series™ Across the board. Around the world.™ The Power Franchise® Programmable Active Droop™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench® QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ ScalarPump™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TCM™ TinyLogic® TINYOPTO™ TruTranslation™ UHC™ UniFET™ UltraFET® VCX™ Wire™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILDíS WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILDíS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I19 9 HMHAA280, HMHA2801 Series, HMHA281 Rev. 1.0.1 www.fairchildsemi.com HMHAA280, HMHA2801 Series, HMHA281 Half Pitch Mini-Flat Package 4-Pin Optocouplers TRADEMARKS