ZETTLER AZ6991-1A-12D Sensitive subminiature relay Datasheet

AZ6991
SENSITIVE
SUBMINIATURE RELAY
FEATURES
•
•
•
•
•
•
Extremely small (5mm)
8 Amp switching capability
High sensitivity, 95 mW pickup
Dielectric strength 4000 Vrms contact to coil
Isolation spacing greater than 8 mm
Reinforced insulation, EN 60730-1 (VDE 0631, part 1)
EN 60335-1 (VDE 0700, part 1)
• Epoxy sealed version available
• UL, CUR file E43203
• VDE certificate 40020561
CONTACTS
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
Ratings
Resistive load:
Max. switched power: 180 W or 2216 VA
Max. switched current: 8 A
Max. switched voltage: 125 VDC or 400VAC
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Rated Load
UL, CUR
1 Form A
8 A at 277 VAC, resistive, 85°C, 10k cycles
6 A at 277 VAC, resistive, 85°C, 60k cycles
6 A at 30 VDC, 85°C, 60k cycles
C300, R300 pilot duty, 20°C, 30k cycles
1 Form C
8 A at 277 VAC, resistive, 85°C, 10k cycles (N.O.)
6 A at 277 VAC, resistive, 85°C, 30k cycles (N.O.)
6 A at 30 VDC, 85°C, 30k cycles (N.O.)
C300, R300 pilot duty, 20°C, 30k cycles (N.O.)
6 A at 277 VAC, resistive, 85°C, 10k cycles (N.C.)
6 A at 30 VDC, 85°C, 10k cycles (N.C.)
B300, R300 pilot duty, 85°C (N.C.)
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 X 107 operations
1 X 105 at 5 A, 250 VAC
Operate Time (typical)
5 ms at nominal coil voltage
Release Time (typical)
3 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
1000 Vrms between open contacts
(at sea level for 1 min.) 4000 Vrms contact to coil
6000 V surge, contact to coil
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 5% of nominal coil voltage
Ambient Temperature
Operating
Storage
At nominal coil voltage
-40°C (-40°F) to 85°C (158°F)
-40°C (-40°F) to 105°C (221°F)
Vibration
1 mm DA at 10–500 Hz
Shock
5g
Enclosure
P.B.T. polyester 94V-0
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
260°C (500°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
1 Form A
6 A at 250 VAC, 85°C, 50k cycles
6 A at 30 VDC, 85°C, 60k cycles
Max. Immersion Time
30 seconds
Weight
6 grams
1 Form C
6 A at 250 VAC, 85°C, 10k cycles
6 A at 30 VDC, 85°C, 10k cycles
Packing unit in pcs
horizontal version
vertical version
20 per plastic tube / 1000 per carton box
100 per plastic tube / 2000 per carton box
Material
Silver nickel or silver tin oxide,
gold plating available
COIL
Resistance
< 50 milliohm initially
VDE
NOTES
1.
2.
3.
4.
All values at 20°C (68°F)
Relay may pull in with less than “Must Operate” value.
Specification subject to change without notice.
When install 1 Form C type of AZ6991, please do not mount “X”
marked side down.
Power
At Pickup Voltage
(typical)
95 mW (3 - 24 VDC coils)
112 mW (48 - 60 VDC coils)
Max. Continuous
Dissipation
0.9 W at 20°C (68°F) ambient
Temperature Rise
20°C (36°F) at nominal coil voltage
Temperature
Max. 105°C (221°F)
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2012-05-04
AZ6991
RELAY ORDERING DATA
COIL SPECIFICATIONS
Nominal Coil
VDC
5
ORDER NUMBER*
Must Operate
VDC
3.75
Max. Continuous
VDC
11.2
Coil Resistance
Ôhm ± 10%
147
1 Form A
1 Form C
AZ6991–1A–5D
AZ6991–1C–5D
12
9.0
26.8
848
AZ6991–1A–12D
AZ6991–1C–12D
24
18.0
53.7
3,390 (±15%)
AZ6991–1A–24D
AZ6991–1C–24D
48
36.0
100.0
10,600 (±15%)
AZ6991–1A–48D
AZ6991–1C–48D
60
45.0
120.0
16,600 (±15%)
* “1A” or “1C” denote silver nickel contacts.
Substitute “1AE” or “1CE” in place of “1A” or “1C” for silver tin oxide contacts.
Add suffix “E” at the end of order number for epoxy sealed version..
Add suffix “A” at the end of order number for gold plated contacts.
Add suffix “H” at the end of order number for horizontal mounting.
AZ6991–1A–60D
AZ6991–1C–60D
MECHANICAL DATA
x
(Please pay attention to note 4 on page 1.)
1.102
[28.0]
PC BOARD LAYOUT
.197
[5.0]
.466
[11.34]
.148
[3.75]
.591
[15.0]
.197
[5.0]
.075
[1.9]
2 x ø .039
[ø 1.0]
5 x .138
[3.5]
2 x .02
[0.5]
.075
[1.9]
.197
[5.0]
.020
[0.5]
5 x .02
[0.5]
3 x .039
[1.0]
.047
[1.2]
.602
[15.3]
3 x ø .051
[ø 1.3]
Vertical Mount
Horizontal Mount
Note: Mounting hole diameters and center to center dimensions
are the same for both vertical and horizontal mounting version
Vertical Mount
x (Please pay attention to note 4 on page 1.)
1.102
[28.0]
.050
[1.26]
.610
[15.5]
.591
[15.0]
WIRING DIAGRAM
.197
[5.0]
Form A
1 2
5 x .118
[3.0]
2x .02
[0.5]
3 x .039
[1.0]
1 2
4
Form A
4
5
5
5 x .02
[0.5]
Form C
Form C
1 2
1 2
3
4
3
4
5
5
Horizontal Mount
Vertical Mount
Horizontal Mount
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2012-05-04
Similar pages